N3 Winter Parts Round Up

Tim, that's exactly what I was thinking. Once the plex got some sun exposure customers probably started breaking them off when they would accidentally push on them.

Easy fix? Aluminum bends and can be repaired if you smash it down. That's my vote.

Chris, did those seats clean up that nice? The gel too. Man, I should have hung onto that boat.

The speedo mount Zach has looks like it would physically bolt up to a Skier or Tique. The lower hole with 4 bolt holes surrounding it go behind the steering bezel. The middle hole is for the tach, the speedo mounts above. No holes to drill! I dont know if this was ever available from the factory, as all the Tiques Ive seen got the black plexi version you have shown. Maybe it was an option on the Skiers? Or maybe Midwest made this later on to retrofit Tiques whose plexi broke? I dunno. All of the Skiers Ive seen out this way had speedos mounted directly to the dash, or none at all. This would be a nice way to add one to a boat that doesnt have any holes drilled in it yet. I dont think it would work on any SN's, as those either had the tach off to the side, or had provisions in the dash for mounting the speedos directly.

Make me an email offer Rod. I got your other email this morning just super swamped with orders and such.

CC Speedo reserved for HW.

Tach and single speedo mounts for early boats/tiques. I have 6-8 of these available.



Air guides. The older style functions but is faded. The newer style functions but is yellowed in used condition.

So we are offering up first born sons right off the bat? I was thinking we could start the bidding slightly lower, and that only after better pictures would the bidding go that high.

Ok so Here goes nothing.









Alright, the first two lenses I believe to be for the mid-late 60s bow lights.

The second one with the clear pieces I believe to be the lenses for the earlier-mid 60s rear all around light.

The bullet bow lights I have no clue

The other clear one is oddly shaped and I am not sure what it fits

The large ones I believe to fit the early large bow light (could be wrong)

The last ones are weird and I am also not sure what they fit

The quantities of the mid 60s are plenty. All of the others I just have a few.

Figure out a way to market these to other manufacturers with the same rub rail.

Also black inserts from taco for 50' range from $89-$115- that without being customized. Those obviously are retail prices. Maybe if enough people prepay- Zach could do the project a little
Over cost. I need yellow- so I am guessing that will be tough to find 40 takers.

Steve,

The yellow/black '90 on the yellow tandem is the boat we launched at Arrowhead Marina &RV Park, Glenville, NY 12302, 518 382-8966 (free advertisement) in September and the one you got pics of along side your Barefooter. I think you even got some shots on the trailer parked next to your boat. Post them if you can, but I'm thinking the 90 is due for an outing at the CT mini 2014!!

Todd

Zach, who is in line for the Wineberry rubrail insert. Sounds like Hollywood needs red, and I would use on my 04 ski to replace the factory installed black. Send me a PM with the length to fit an 04 Ski and a price if it is available.

Todd

I would be down for the red. How are you supposed to keep them original if you can't source them? Maybe we need to get our plastic expert,Dave Gwinn on this

40 boats sounds like a tall order, who knows?? On Blue looks like we have 2, only 38 to go

Thanks for the info, if it does materialize I would definitely be in for one boat (50') of Vapor Blue or Silver metallic if available.

If you painted a rubrail I imagine you would have greater problems getting it to not unadhere whenever you rubbed anything.

velde99 wrote: Need to know if the insert is 3/8" or 1/2".

Pretty sure it was 5/8” on all the boats that came with colored rub rail inserts