Jabsco raw water pump impeller

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I would like a little advice even though I know the proper thing to do.

I pick up my new to me 69 or 70 Mustang a week from tomorrow and it hasn't been used in several years. The current owner has had it professionally maintained (according to him) and it reportedly ran well when put away. I would really like to take it out for one ride this year and see what problems, if any, exist. I am concerned about using it without replacing the jabsco impeller, and I have no idea where to get one anyway. Is it prudent to take it out and watch the temp gauge closely? The boat is an H/M, but it has aftermarket iron Osco manifolds on it, so it can't ruin the pair of H/M manifolds I will be putting on it from another boat. The exhaust hoses could use a replacement, but I don't think they are anywhere near a rupture.

Any advice from the experts?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
john b Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Grand Poobah Joined: July-06-2011 Location: lake Sweeny Status: Offline Points: 3241	Post Options Post Reply Quote john b Report Post Thanks(0) Quote Reply Topic: Jabsco raw water pump impeller Posted: September-20-2011 at 11:51pm
	I would like a little advice even though I know the proper thing to do. I pick up my new to me 69 or 70 Mustang a week from tomorrow and it hasn't been used in several years. The current owner has had it professionally maintained (according to him) and it reportedly ran well when put away. I would really like to take it out for one ride this year and see what problems, if any, exist. I am concerned about using it without replacing the jabsco impeller, and I have no idea where to get one anyway. Is it prudent to take it out and watch the temp gauge closely? The boat is an H/M, but it has aftermarket iron Osco manifolds on it, so it can't ruin the pair of H/M manifolds I will be putting on it from another boat. The exhaust hoses could use a replacement, but I don't think they are anywhere near a rupture. Any advice from the experts?

Gary S Members Profile Send Private Message Find Members Posts Add to Buddy List Grand Poobah Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096	Post Options Post Reply Quote Gary S Report Post Thanks(0) Quote Reply Posted: September-21-2011 at 12:10am
	I'm no expert but I have stayed at a holiday inn express West Marine shows they have them,not sure they have them in the stores but you could call, Jabsco # 1210-0001-p or 1210-0003-p or West Marine # 9507369 or 9507591. Seal # for when you rebuild it someday is 96080-0080 I have a new one or a used one if you can't find any,we'd have to find a way to get it to you-
	69 Mustang HM SS 95 Nautique Super Sport

Luchog Members Profile Send Private Message Find Members Posts Add to Buddy List Grand Poobah Joined: April-17-2007 Location: Argentina Status: Offline Points: 2135	Post Options Post Reply Quote Luchog Report Post Thanks(0) Quote Reply Posted: September-21-2011 at 1:51am
	if you have good water pressure hose it on the trailer and give it a go see what happens. If the pump and exhaust manifolds get hot (manifolds should be hot but still touchable) you'll need to rebuild the pump. if not take it for a test ride!
	1980 Ski Nautique Commander 351W

Bri892001 Members Profile Send Private Message Find Members Posts Add to Buddy List Grand Poobah Joined: September-27-2008 Location: Boston MA Status: Offline Points: 4947	Post Options Post Reply Quote Bri892001 Report Post Thanks(0) Quote Reply Posted: September-21-2011 at 12:29pm
	The impeller is listed at the bottom of this skidim page too: http://www.skidim.com/products.asp?dept=1096&pagenumber=1&sort_on=&sort_by=

Jabsco raw water pump impeller

About CCF

Donate

Partners

Contact