Securing boat to trailer |
Post Reply |
Author | |
Bohinny
Groupie Joined: July-21-2009 Location: Houston TX Status: Offline Points: 74 |
Post Options
Thanks(0)
Posted: April-04-2012 at 10:45pm |
I am a new owner of a 1995 SNOB and I trailered it one time to the lake and the back of the boat bounced the entire way. What is the best way to secure the boat. I see 3 options. 1)Hook the straps to the swim platform, which does not look very strong. 2) Pull the little black covers off that cover the lifting eyes, what are the black covers for and why cover up the lifting eyes? 3) Put a big strap all the way around the top of the boat and strap it down, seems like a pain in the @ss.
I am also looking for the center section of the walk thru windshield if anybody know where I can find one Thanks Billy |
|
Billy
|
|
SNobsessed
Grand Poobah Joined: October-21-2007 Location: IA Status: Offline Points: 7102 |
Post Options
Thanks(0)
|
Most guys tie down from the platform bkts. I use a full gunwale strap. I wouldn't use the lift ring. Not sure what the covers are that you asked about.
|
|
“Beer is proof that God loves us and wants us to be happy.”
Ben Franklin |
|
KRoundy
Platinum Member Joined: August-23-2010 Location: Lake Stevens Status: Offline Points: 1702 |
Post Options
Thanks(0)
|
Pictures would help. No idea what the plastic covers are you mention?
|
|
Previous: 1993 Electric Blue/Charcoal Ski Nautique
Current: 2016 Ski Nautique 200 Open Bow |
|
Foot_Fungus
Gold Member Joined: February-27-2012 Location: Chapin, SC Status: Offline Points: 501 |
Post Options
Thanks(0)
|
plastic covers are to keep exhaust from coming up the back of the transom inbetween the swim platform. Apparently people complained of an exhaust smell so CC added them to address the concern in the early 90s.
All.. he's referring to the covers that go over the rear lift rings. Seems most people take them off exactly for the reason you mentioned. From other posts I've read seems they don't make that big of a difference anyways. Only reason I haven't is b/c I'm too lazy to fill in the screw holes with 5300. To answer your original question I just use a gunwale strap(fancy/technical name for ratchet strap over the back). I put a piece of cardboard under the corners where it contacts the hull just to prevent rubbing, sometimes you'll get some light rub marks if you don't put anything between the strap and the hull depending on the strap and the ride. |
|
kapla
Grand Poobah Joined: March-27-2008 Location: BA, Argentina Status: Offline Points: 6148 |
Post Options
Thanks(0)
|
he means these...
transom cup in fact they cover the lifting ring from below, also they are there to prevent CO2 build up... |
|
<a href="">1992 ski nautique
|
|
Bohinny
Groupie Joined: July-21-2009 Location: Houston TX Status: Offline Points: 74 |
Post Options
Thanks(0)
|
Thanks I will get a ratchet strap (gunwale strap I learned something new)I took the transom cups off but if anybody complains about exhaust smell it will be my wife so I will be putting them back on. Has any body heard of someone ripping the swim platform brackets off?
Thanks for the info Billy |
|
Billy
|
|
8122pbrainard
Grand Poobah Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
Post Options
Thanks(0)
|
Billy,
No on the lifting ring. Yes on the gunwale strap and yes on the swim plateform brackets. No you will not rip off the platform brackets - the load is is "shear" and less than the tension load when someone is on the platform. |
|
harddock
Platinum Member Joined: June-04-2008 Location: Toontown, MA Status: Offline Points: 1763 |
Post Options
Thanks(0)
|
I too use the swim platform brackets in a "X" patten. For any distance towing I also use a small ractchet strap from the boweye back to the trailer which keeps the boat from moving foward in a hard stop.
|
|
mdvalant
Grand Poobah Joined: May-06-2009 Location: Bellevue, IA Status: Offline Points: 2059 |
Post Options
Thanks(0)
|
So you guys recommend platform brackets over rear lifting rings? Seems redundant here...
"Billy, No on the lifting ring. Yes on the gunwale strap and yes on the swim plateform brackets. No you will not rip off the platform brackets - the load is is "shear" and less than the tension load when someone is on the platform. " So since this load is "shear" why not use the lifting rings? Anyone actually rip/loosen those up on a 90-newer boat? |
|
Hollywood
Moderator Group Joined: February-04-2004 Location: Twin Lakes, WI Status: Offline Points: 13515 |
Post Options
Thanks(0)
|
Lifting rings are fine to use. There really isn't that much force there, the boat pulls the trailer up.
|
|
storm34
Grand Poobah Joined: November-03-2008 Location: Dexter Iowa Status: Offline Points: 4492 |
Post Options
Thanks(0)
|
No one has asked how the boat is bouncing?
If it's bouncing at the nose then it's a different problem, you need to pull the nose down instead of forward like you would with a winch for example. I too have a SNOB (with a Road Runner trailer) and if it's not sitting up on the stop with the winch tight it will bounce. I really need to add a turnbuckle to pull it down, but that's a ways down my project list. |
|
Morfoot
Grand Poobah Joined: February-06-2004 Location: South Lanier Status: Offline Points: 5320 |
Post Options
Thanks(0)
|
I have two Harley Davidson ratcheting straps (they use to strap the rims down to the crate when they ship) and wrap around the outer swim platform brackets where they're bolted to the boat and the frame on the trailer. Have never had an issue with them. Been doing so for years to keep the boat from sliding back and forth up against the guide poles in tight turns after I sprayed the bunks down with silicone. I'll take a picture of my set up when I get home.
|
|
"Morfoot; He can ski. He can wakeboard.He can cook chicken.He can create his own self-named beverage, & can also apparently fly. A man of many talents."72 Mustang "Kermit",88 SN Miss Scarlett, 99 SN "Sherman"
|
|
Bohinny
Groupie Joined: July-21-2009 Location: Houston TX Status: Offline Points: 74 |
Post Options
Thanks(0)
|
Boat is on a Ramlin and I use the turnbuckle, and it is the back of the boat that bounces when hitting bumps in the road. Houston does not have the best roads. Here are some pics. Thanks for the info
Billy |
|
Billy
|
|
SNobsessed
Grand Poobah Joined: October-21-2007 Location: IA Status: Offline Points: 7102 |
Post Options
Thanks(0)
|
I think you are good to go!
|
|
“Beer is proof that God loves us and wants us to be happy.”
Ben Franklin |
|
Morfoot
Grand Poobah Joined: February-06-2004 Location: South Lanier Status: Offline Points: 5320 |
Post Options
Thanks(0)
|
Here are the pictures of how I have the stern of the 88' strapped down.
|
|
"Morfoot; He can ski. He can wakeboard.He can cook chicken.He can create his own self-named beverage, & can also apparently fly. A man of many talents."72 Mustang "Kermit",88 SN Miss Scarlett, 99 SN "Sherman"
|
|
bkhallpass
Grand Poobah Joined: March-29-2005 Location: United States Status: Offline Points: 4723 |
Post Options
Thanks(0)
|
Smell is the least of one's worries. We are talking about engine exhaust. Humans pass out and die when breathing engine exhaust. We had a young girl in our community pass out form the fumes, fall overboard, and drown before anyone could find her in the water.
To suggest that most people remove the transom cups, or that they serve no purpose is, in word, dumb. My boat weighs a lot more than a 95 SNOB. I've used tie down straps to the swim platform bracket for 11 years now, including a trip form CA to WI and back, with no issue. BKH |
|
Livin' the Dream
|
|
63 Skier
Grand Poobah Joined: October-06-2006 Location: Concord, NH Status: Offline Points: 4269 |
Post Options
Thanks(0)
|
For the relatively short trips I generally take, I don't tie down the transom. The boat doesn't have any bounce on the Ramlin.
I'm confused on those cups. How is the exhaust getting to the passengers, and what do the cups seal off? |
|
'63 American Skier - '98 Sport Nautique
|
|
SNobsessed
Grand Poobah Joined: October-21-2007 Location: IA Status: Offline Points: 7102 |
Post Options
Thanks(0)
|
I don't understand the concept of those covers either. Standing by.
|
|
“Beer is proof that God loves us and wants us to be happy.”
Ben Franklin |
|
Bri892001
Grand Poobah Joined: September-27-2008 Location: Boston MA Status: Offline Points: 4947 |
Post Options
Thanks(0)
|
At some point they decided to make the platform pretty much solid, with the idea (I'm guessing) that the exhaust would be carried further out the back and not be able to waft up the transom towards the back seat passengers. They also put the lifting rings, in line with the platform, basically along the same line as the platform brackets, but more interior. They're mounted along the horizontal transom surface, unlike the bow lifting rings and the transom rings of previous models. These lifting ring points present the only void in the solid transom idea. I guess they would allow a space for exhaust to still waft up. So, the cups cover the void along the bottom side. and allow you to still access the rings from above. Unfortunately, the cups also block the path of a tiedown giong from the lifting rings to a trailer. |
|
Foot_Fungus
Gold Member Joined: February-27-2012 Location: Chapin, SC Status: Offline Points: 501 |
Post Options
Thanks(0)
|
bohinny I like your winch pass thru catcher's mitt post. I think I may go cut a hole in mine. getting it on the trailer without a winch on my steep ramp is about as easy as nailing jello to a wall.
|
|
amwalker
Newbie Joined: January-12-2008 Location: United States Status: Offline Points: 1 |
Post Options
Thanks(0)
|
We have tied our 94 SNOB over the swim platform shown in the picture above. We have had zero issues with boat bouncing using simple 1-inch lever straps from our dealer.
|
|
I share a 1996 SNOB.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |