Mustang and misc. 60's-70's parts

I just acquired a box full of Mustang parts, not all of which I need- so I'm taking this opportunity to do a quick purge of my part collection. If anyone has any questions, application specific or otherwise, please let me know. All prices are "or best offer", I'd like to see these go to someone who can use them. I believe all parts to be functional, but if that turns out not to be the case, let me know and we'll work it out! Prices do not include shipping.

Email: TRBenj@gmail.com

1. Gauges: Teleflex oil and water temp gauges, this style was used on CC's ~1972-1976. They supposedly work, but I have not tested them. Chrome on oil pressure gauge is dirty- should clean up nicely (not pitted). $25/ea Both sold!



Teleflex temp gauge, this style was used on CC's ~1969-1971. Face is a little faded, not easy to read. Supposedly working, but untested. $15



Teleflex Mk27 tach. Minor pitting on the bezel. Supposedly works, but untested. Sold!



60's Airguide speedometer... see below.

2. Misc. trim and hardware:

Four (4) scoops (top right). CC used these on many models in 1968, possibly slightly earlier ones as well. Chrome is very pitted. $10/ea.
Sold

Two (2) vents (top left). Might be SS? If chrome, theyre pretty nice. Used as bow vents on late 60's Mustangs, and on motorboxes prior to '72. $10/ea.

Two (2) exhaust trim rings, 2-1/4" diameter (middle left). Used on small block Interceptor V8's and Buick V6's in the 60's. Possibly earlier/smaller engines as well. Chrome is mostly worn off. $5/ea.

Fuel fill (bottom left). Chrome is in poor shape. $10 sold

Mustang badge. Chrome is a bit pitted. Sold

Fuel sight glass (bottom right), used on various models in the 60's and early 70's. Chrome is in pretty nice shape. Plexi has a chip in it, but not visible from the top side- shouldnt affect function. $30.

Lifting ring, fair chrome- no pitting, but some wear. $15
sale still pending I guess?



Four (4) step pads and frames. Used on various models in the 60's through ~'73. Step pads themselves are not in good shape- very weathered (new ones are available from a few places). Chrome on frames has some pitting.   sold


Rotary steering heads/helms. I believe both are Teleflex. Not sure what model the one on the left is. The one on the right is the Big-T style used on most CC's from the late 60's through ~1990. One of the bezel mounting holes needs to be drilled out and retapped, otherwise fully functional. Both sold!



Morse MV1 control #1. Used mid 60's through ~1973. No backing plate. Moves freely. $30.



(continued below)...

Tim, Trying for a 12 ish arrival.

PS, Old laptop!

UT

Would you happen to have a gas tank float with the gauge on the top your willing to part with?

Tim - I'd like the lifting ring for sure and may be interested in other parts. Can I paypal or send you a check to hold that lifting ring until I determine if I want more?

I am still looking for an amp meter gauge in that same style Teleflex.

I would like the steering wheel if still available.

Trevor

Scott, no dice on that ammeter... the only one I have is part of a complete set that I dont want to break up.

Email: TRBenj@gmail.com

Update 3/30/14... the list of parts available in the first post is current. I am also adding the following:

1. Another set of step plate frames. Chrome is not perfect, but presentable. Sold



2. Another bow light. Chrome is ok, not great. $15.



3. Pair of emblems... broken piece located! One emblem is whole, the other is broken, but can probably be repaired. 10" overall length. Chrome is in nice shape. $100.





4. One Airguide left. Chrome is a bit pitted, but overall, quite presentable. Fully functional. $100.



5. Misc gauges. Non-original temp, speedo and tach probably work, but I havent tested them. I have my doubts about the clock. Cover shipping and make a $5 (per gauge) donation to the site and get it out of here, otherwise theyre going in the trash!






6. Big-T helms. I have one or 2 fully functional spares. Sorry, no pics... but can get them if need be. $50/ea.

Email: TRBenj@gmail.com

I should mention that I have plenty of project boats, so may consider interesting part trades- let me know what you have!

I'm always on the lookout for broken/rough condition Airguide speedometers. Ive also been looking for one of these steering wheels:



TRBenj@gmail.com

Good deal, Mr. P... consider it yours!

davidreed wrote: I would like to have the two bow vents..

Email me and we can discuss particulars: trbenj@gmail.com

HI, do you have any seats that might work in a 1965 Correct Craft Mustang? Dan

Like Jonathan said, there's nothing about the mustang seats used prior to 69 that can't be made at home. I have the ability to reproduce the 69-70 buckets but those are nowhere near original for a 65.

Thanks for the seat info. I am trying to keep my Mustang as original looking as possible.   Dan

Sorry webad66@gmail is email

TRBenj wrote: I just tried to email you, but it appears to be an invalid address. Email me: TRBenj@gmail.com Edit: resent