2001 SAN Interior & SeaDek |
Post Reply |
Author | |
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
Posted: January-15-2019 at 10:53pm |
Little project I’m helping my buddy with over the winter. I’m more or less storing it and doing all the work at his expense because he is tired of hearing me give him crap. Interior has been in rough shape ever since we started riding together 5 years ago. Finally got him to open his wallet and let me work some magic.
|
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
First task at hand was SeaDek on all the same surfaces I did on my 2001.
|
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
Next project is pulling all of the interior out of the boat to take to my local upholstery gal. Weve decided to change this boat up quite a bit. We are reversing the interior color to be mainly blue and with some gray. No more white. Everything in the boat that is currently white will be blue. Everything in the boat that is currently Blue will be gray. Everything in the boat that is gray will be updated to the new darker gray.
Here is a picture of the SeaDek colors matched to new interior color Took this picture to show the upholstery lady so she can hopefully make each piece a hair larger for a more tight fit. This front wraparound piece was much easier to pull out than I imagined it would be. Good to know for when I have my interior redone next winter. |
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
First thing I took to the upholsterer was the 3 back hatches. She called last week and said they were ready to be picked up. I walked in noticed something terribly wrong....she flip flopped the colors. She accidentally ordered more gray than she did blue...Luckily she took full responsibility and said she would order more blue and reverse the colors. Glad I didnt take her the whole set at once, that could have been catastrophic! On a side note though...what she did looks awesome! I felt so bad telling her she had the colors reversed. I should have these pieces back the correct way by the end of the week. More pics to come as she gets them done!
|
|
GottaSki
Grand Poobah Joined: April-21-2005 Location: NE CT Status: Offline Points: 3327 |
Post Options
Thanks(1)
|
Looking great
btw did she yell "hey Azz Monkey" when you walked in? |
|
"There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing."
River Rat to Mole |
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
Now we are on the right track! Just got the 3 rear hatches back and they look awesome! We also decided to do way with the original thought of gray seat bottoms like it was factory and go with blue. So the boat will be all blue with gray accents.
|
|
Treybizttu
Gold Member Joined: October-02-2014 Location: Grapevine, TX Status: Offline Points: 534 |
Post Options
Thanks(0)
|
I really like the colors.
I plan to do the Sea Deck to mine once it's a runner. |
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
Thanks, can’t wait until we start getting more pieces back! You should have a few options in your area for SeaDek fabricators without having to make the templates yourself and deal directly with SeaDek, I have heard that is a pain. Luckily I have the only fabricator and installer in the Midwest within 30 minutes of me. |
|
Treybizttu
Gold Member Joined: October-02-2014 Location: Grapevine, TX Status: Offline Points: 534 |
Post Options
Thanks(0)
|
any progress?
|
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
It’s been a boring couple of weeks. The upholsterer had a few other projects she needed to get done. She did call yesterday to say she will be ready for more pieces over the weekend. She should have the big wraparound bow piece done and the big wrap around piece in the back done this weekend. It may be middle of next week before I get any pictures as I’m headed to Dallas for work on Sunday morning.
2 new speakers for the bow to match the rest of the boat. All the speakers will still be hidden behind the cloth to keep the factory look but they are all Wetsounds...kinda wishing I would have ponied up the money several years ago for Wetsounds when I did mine. |
|
rosconole
Gold Member Joined: May-10-2008 Location: United States Status: Offline Points: 758 |
Post Options
Thanks(0)
|
How much all those pieces run you for sea dek? they are close by me here I could use some in front of hatch like that.
|
|
1989 ski nautique ,1991 barefoot nautique, 1993 Mustang Cobra 1998 5.0 Magazine shootout invitee
|
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
To do everything you see on this boat you’re looking at anywhere between $500-700 depending on if the templates they have match your boat. One thing we learned as just because it’s the same year and model doesn’t mean it’s going to fit. Boats of this era and further back have more variations from one boat to the next than boats nowadays have. I had DekDesigns in Topeka do this boat.
|
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
Got the rear seat back picked up yesterday. The nose wraparound piece should be finished by Wednesday when I get back in town.
|
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
Bow piece is done. Now just a bunch of easy stuff left!
|
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
Finally got the seat heaters in off the slow boat from China. Here are a few pictures to show what the preliminary plan is with them.
|
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
Got some pieces back today. Looks really good. The only piece that you can noticeably see the heating pad underneath is the bottom of the drivers seat. It doesnt look terrible IMO since it is at least straight. Should have the rest of the pieces back by the weekend.
|
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
Finally got the boat in some decent light to be able to see the real glory of this blue. Cold brew anyone? Ballast tanks pulled out |
|
Parkinglot
Newbie Joined: March-05-2019 Location: Texas Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Very nice Brit, How much does "your gal" charge to do that work? Too bad that beer doesn't age like wine!
|
|
FredWSauer
Senior Member Joined: August-28-2015 Location: St. Paul, MN Status: Offline Points: 156 |
Post Options
Thanks(0)
|
Thanks for sharing all the pictures! Nice colors. Very timely for me as I was looking for speakers to update the 93SN. - Fred
|
|
- FWS
1993 Ski Nautique 1978 Glastron T-160 1994 Weeres Pontoon - Wife's Boat |
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
This was about $2,500 worth of work |
|
Brit_hunsicker
Groupie Joined: December-23-2018 Location: Lecompton, KS Status: Offline Points: 64 |
Post Options
Thanks(0)
|
Got the boat all cleaned up and the interior put together.
|
|
lewy2001
Grand Poobah Joined: March-19-2008 Location: NSW Australia Status: Offline Points: 2234 |
Post Options
Thanks(0)
|
You would need towels all over that interior in a Australian summer
|
|
If you're going through hell, keep going
89 Ski <a href="http://www.correctcraftfan.com/diaries/details.asp?ID=5685" ta |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |