Correct Craft gas pedal
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=17284
Printed Date: April-28-2024 at 10:27pm
Topic: Correct Craft gas pedal
Posted By: Riley
Subject: Correct Craft gas pedal
Date Posted: April-26-2010 at 1:59pm
Anyone ever seen one of these?
It is the cable connection to an old foot throttle. The cable needs replacing, but in order to use the foot throttle, I have to find one of these that either is already on the cable or will screw on to a 33C cable. Any ideas where to find one? |
Replies:
Posted By: WhiteLakeSkier
Date Posted: April-27-2010 at 1:58am
|
I found that cable in my old boat and had no idea what it went to. Now I know. Would be nice to get one of these pedals ------------- www.correctcraftfan.com/diaries/details.asp?ID=5120&sort=&pagenum=1 - 1961 CC Custom American Skier |
Posted By: Riley
Date Posted: April-27-2010 at 1:51pm
|
Do you want to sell the cable? ------------- |
Posted By: 8122pbrainard
Date Posted: April-27-2010 at 2:10pm
|
Bruce,
See how close the ID of the brass tube with the ball is to the theads on the end of a 33C cable is. Cut the ball end off and drill/tap and locktite it to the end of the new cable. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Riley
Date Posted: April-27-2010 at 4:04pm
|
The brass is wider than the threaded rod. That may work! Do you suppose the cable and pedal was a special Correct Craft part? ------------- |
Posted By: 8122pbrainard
Date Posted: April-27-2010 at 5:53pm
|
Bruce,
I doubt it's a special part. I'd have to say they were getting surplus parts off some car like they did for things like the steering box/collumn/wheels. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Riley
Date Posted: May-07-2010 at 2:30pm
Pete, it worked!
 ------------- |
Posted By: 8122pbrainard
Date Posted: May-07-2010 at 3:11pm
Bruce, That's great! Now you can keep the original gas peddle and use a non original cable!  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Riley wrote:Posted By: Riley
Date Posted: May-07-2010 at 3:16pm
|
I hope I can find the other old cable as I suspect someone else is going to need one. ------------- |