USED NAUTIQUE PARTS
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=17642
Printed Date: April-24-2024 at 9:35am
Topic: USED NAUTIQUE PARTS
Posted By: SSIDSKI
Subject: USED NAUTIQUE PARTS
Date Posted: May-20-2010 at 5:17pm
|
I have all type of used nautique parts for 81 to 93 models
vertually every peace that could be reused shafts,struts,props,rudders,fuel tanks,windshield,engines and engine parts,trans,ski pylons,engine carriage,seats,gauges,dive platforms,brackets,and more please call Don 352-258-4999 ------------- SSIDSKI-FLORIDA |
Replies:
Posted By: Swatkinz
Date Posted: May-20-2010 at 9:06pm
|
I have an 88 SN and am looking for the teak ski racks that mount on the starboard side. There are two of them, but each rack has a main rack piece as well as a smaller piece that affixes to the floor. A total of 4 teak pieces. I also need one of the teak pieces that runs along the starboard gunnel. Do you have them? ------------- Steve 2011 Sport/Air 200 Excalibur 343 2017 Boatmate Tandem Axle Trailer Former CC owner (77, 80, 95, 88, all SNs) Former Malibu owner (07, 09) |
Posted By: SSIDSKI
Date Posted: May-20-2010 at 11:45pm
|
Hi Steve i don't think that i have the ski racks but i will check to see.I know that i have some of the gunnel teak but also have to check for the starboard side and condition
Thanks Don ------------- SSIDSKI-FLORIDA |
Posted By: dwcar
Date Posted: May-21-2010 at 12:57am
|
Don,
Do you have the capacity plate for an 83 SN? any of the seat hinges? the water strainer basket? ------------- 83Ski |
Posted By: FrankT
Date Posted: May-21-2010 at 9:28am
|
Do you have any pictures of the windshield(s)?
FrankT |
Posted By: Fly100
Date Posted: May-21-2010 at 10:28am
|
Could do with a prop mines a 1996 196 14 x 16 on a tappered shaft RH rotation i THINK!
FLY |
Posted By: bluebird88
Date Posted: May-21-2010 at 11:49am
|
Hi Don
Parts I still need to restore my 1988 MARINIQUE C/B WITH 351 FORD, 1:1 BW TRANS #1 BUCK ALGONQUIN RUDDER PORT - 1 1/4" SHAFT, BASE 3 1/4 X 4", 4 3/4" HIGH, MARKED 10RP125ACC, BASE PLATE MARKED B-A RPBP100/125CC #2 RUDDER - 1 1/4 " SHAFT THIS ALL I HAVE ON SIZE AS IT IS ON THE BOTTOM OF THE LAKE STILL KISSING THAT LOG. IF A CCFAN HAS SIZES OR A GOOD PHOTO FROM A MARINIQUE I WHOULD LOVE TO HAVE THE INFO. #3 SHAFT - 41" OVERALL, ONE TAPERED END, 1" SHAFT, 3 3/4" TO START OF TAPER, KEYWAY BOTH ENDS. #4 STRUT, MARKED 8A-8 J - BASE 5 3/4" X 3 3/8", 6" BARREL #5 #6 FLYWHEEL, 13 1/4" ROUND, 157 TEETH - STAMPED C87E #7 Glove box lock EMAIL ME INFO, COST IF YOU HAVE PARTS, THANK YOU, CWWFIREREPAIR@AOL.COM ------------- cww |
Posted By: bluebird88
Date Posted: May-21-2010 at 11:56am
|
Hi Don
Also I an looking for a 4 blade ACME Prop #208 13X12.5V right hand 1" cww. ------------- cww |
Posted By: Donald80SN
Date Posted: May-21-2010 at 12:31pm
|
Hi Don,
Do you have a port side ( Left Side - Passenger) Adjustable vent window? I have one missing on a 1980 Windshield. I know that the 81's should be the same size. thanks, Donald |
Posted By: Donald80SN
Date Posted: May-21-2010 at 12:40pm
|
Steve,
Give Teak World Enterprises a call at 615 444 7269 in Lebannon, Tennessee. Google the name. They take recycled teak and can make anything for you. You may need to send one as a sample to have others made. Apparently, it is against the law to harvest new African Teak Wood. You have to use recycle. It could mean that you have a stinger problem. LOL !!!!!! Donald |
Posted By: 93nautique
Date Posted: May-21-2010 at 6:52pm
| am looking for windshield [left side broke] for 93 sport nautique |
Posted By: rubitlarman
Date Posted: May-21-2010 at 8:46pm
|
DO you have a raw water pump for a 351? If so would you ship to New Zealand?
Rob rubitlarman@hotmail.com ------------- More power is needed till the fear of speed is overcome by the thrill of acceleration |
Posted By: boater86
Date Posted: May-22-2010 at 12:30am
| any seats for an 86 2001? We're looking for a backseat. |
Posted By: AZ
Date Posted: May-22-2010 at 2:43pm
| Do you have a rudder for a 93 Nautique? |
Posted By: Jtandy
Date Posted: May-22-2010 at 3:28pm
| Don just spoke with u on the phone about the parts for a southwind... seats and motor cover, and dip stick. let me know what u have and i will send u a detail list of what i need. thx jon |
Posted By: SSIDSKI
Date Posted: May-23-2010 at 10:48am
|
Hi Steve i do have the gunnel teak pieces just let me know what piece you need ------------- SSIDSKI-FLORIDA |
Posted By: SSIDSKI
Date Posted: May-23-2010 at 10:51am
|
Yes i have a windshield for a 93 Sport Nautique and will take $150.00 for it Thanks Don ------------- SSIDSKI-FLORIDA |
Posted By: SSIDSKI
Date Posted: May-23-2010 at 10:53am
|
Hi that would be for the port side only
thanks Don ------------- SSIDSKI-FLORIDA |
Posted By: SSIDSKI
Date Posted: May-23-2010 at 10:55am
|
I have some of the parts for the rear seat i'm missing the center bottom and top only but have the roto cast center base ------------- SSIDSKI-FLORIDA |
Posted By: SSIDSKI
Date Posted: May-23-2010 at 10:57am
|
No port side vent only the stbd side ------------- SSIDSKI-FLORIDA |
Posted By: eric lavine
Date Posted: May-23-2010 at 11:04am
|
92 windshield and wings? ------------- "the things you own will start to own you" |
Posted By: SSIDSKI
Date Posted: May-23-2010 at 11:17am
|
Not sure if i have them it will take a day or two for me to check
Thanks Don ------------- SSIDSKI-FLORIDA |
Posted By: SSIDSKI
Date Posted: May-23-2010 at 11:19am
|
Yes i have many rudders let know if you need the port also
Thanks Don ------------- SSIDSKI-FLORIDA |
Posted By: eric lavine
Date Posted: May-23-2010 at 11:20am
|
post if you do, I threw your number in my wallet Friday and forgot to call you, well, i didnt get a chance too.
where are you at in Fla.? ------------- "the things you own will start to own you" |
Posted By: SSIDSKI
Date Posted: May-23-2010 at 2:43pm
|
Hi Eric i'm in Melrose Florida ------------- SSIDSKI-FLORIDA |
Posted By: Donald80SN
Date Posted: May-23-2010 at 4:47pm
Don, I do need the port side, but I can make the starboard side work. I will call you on Monday. Donald |
SSIDSKI wrote:Posted By: rtsuggs
Date Posted: May-23-2010 at 11:19pm
|
what about a speedo? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5143" rel="nofollow - 78 nautique 78 ski nautique SOLD 85 ski nautique |
Posted By: SSIDSKI
Date Posted: May-24-2010 at 1:34am
|
Hi
i do have some speedo's not sure of the condition. which do you need Surface or flush mount? ------------- SSIDSKI-FLORIDA |
Posted By: MartyMabe
Date Posted: May-24-2010 at 2:58am
|
Temp guage for 93 SN ? ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: SSIDSKI
Date Posted: May-24-2010 at 12:30pm
|
No I don't have any 93 gauges at this time ------------- SSIDSKI-FLORIDA |
Posted By: rtsuggs
Date Posted: May-24-2010 at 12:33pm
|
I need a surface mount speedo..
Thanks ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5143" rel="nofollow - 78 nautique 78 ski nautique SOLD 85 ski nautique |
Posted By: Jtandy
Date Posted: May-24-2010 at 2:41pm
| Don right now i need the dip stick for a ford 351, motor cover, and if you have it a fresh water strainer for the inlet supply. And if you found them the pleasure craft sticker for the valvue covers, and the spec. sticker for the value cover. the one with the dewl gap and spark plug gap.. my email is jtandy@bellsouth.net. let me know what you can do on this... Thx jon |
Posted By: FamilyGuy
Date Posted: May-24-2010 at 3:59pm
| Do you have an airguide pitote tube for a 99 sport nautique? |
Posted By: LAKESIDE
Date Posted: May-24-2010 at 10:45pm
|
Hi .Do you have a prop for a 93 SN 14x16 RH . And also a pylon for same boat. If so how much. I live in Jax FL ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5150&sort=&pagenum=1.com" rel="nofollow - 93 Ski Nautique SUCK MY WAKE |
Posted By: 93nautique
Date Posted: May-25-2010 at 12:39am
| am interested in windshield for 93 sport nautique please contact me at 804-908-0382 mike |
Posted By: SSIDSKI
Date Posted: May-25-2010 at 1:26am
|
Hi lakeside
i do have a 3 blade 14 x 16that has been reconditioned that a would take $180. for or i have a ACME 422 12.50x15.50 4 blade new for 435.00 ------------- SSIDSKI-FLORIDA |
Posted By: SSIDSKI
Date Posted: May-25-2010 at 10:33am
|
Hi lakeside
i do have a pylon for 93 SKI/Sport Nautique.Give me a call ------------- SSIDSKI-FLORIDA |
Posted By: YooperSully
Date Posted: May-26-2010 at 9:49am
|
I'm looking for the battery box cover on a 1987. Do you have one? ------------- 87' 2001 |
Posted By: salmongc
Date Posted: May-26-2010 at 5:31pm
| Do you have any of the red aluminum PCM valve covers? |
Posted By: anthonylizardi
Date Posted: May-26-2010 at 6:12pm
| Do you have an 89 Dash Pod? |
Posted By: SSIDSKI
Date Posted: May-26-2010 at 6:40pm
|
No 89 dash pods at this time ------------- SSIDSKI-FLORIDA |
Posted By: SSIDSKI
Date Posted: May-26-2010 at 6:43pm
|
no airguide pitot tube at this time ------------- SSIDSKI-FLORIDA |
Posted By: TheChad1976
Date Posted: May-27-2010 at 6:43pm
|
Hey Don,
I'm the guy that bought Jim's 87 2001 in Jax. Would you happen to have any of the Trailor guide posts or know anyone that will fabricate them around here? I have the boat around the corner from you in Interlachen. |
Posted By: dwcar
Date Posted: May-28-2010 at 3:09am
|
Don,
Do you have the capacity plate for an 83 SN? any of the seat hinges? the water strainer basket? ------------- 83Ski |
Posted By: clancy3910
Date Posted: May-28-2010 at 6:32pm
| Looking for a windshield for 82 SN with at least top frame. Thanks Mike clancy3910@comcast.net |
Posted By: pmccook1
Date Posted: May-28-2010 at 9:55pm
|
I need the little corner piece that the front of the engine cover comes down on. Theres one on each side screwed to the floor. Not sure of the proper name. But the engine cover rests on these when you let it down to keep it from sliding from side to side.
I'll take'em if you have'em. Also need the rear knobs that hold the back seat down. . ------------- pmccook1 Current boat:1993 Ski Nautique " Purple " Have owned : 76' ski nautique, 93' Sport Nautique, 83 Stars and stripes, 47' Chris Craft Continental |
Posted By: QUEBEC
Date Posted: May-29-2010 at 2:08am
|
Do you have a observer seat bottom/base for a 88 ski nautique ------------- NEVER EVER GIVE UP ON YOUR SELF YOUR FAMILY YOUR FRIENDS AND GOD THERE ALWAYS A NEW DAY |
Posted By: SSIDSKI
Date Posted: May-29-2010 at 12:00pm
|
hi clancy i don't have any 82 more 2001 windshields at this time ------------- SSIDSKI-FLORIDA |
Posted By: YooperSully
Date Posted: May-29-2010 at 12:57pm
------------- 87' 2001 |
Posted By: MartyMabe
Date Posted: May-30-2010 at 2:20pm
Phil do you want me to make you some like mine? e-mail me  ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: keegan99usa
Date Posted: June-01-2010 at 6:40pm
|
Looking for the bow navigation light for a 1991 SNCB. Also a hull/windshield combo Ski Nautique for a "beyond project" hot tub boat.
Thanks dan ------------- Is it Summer yet?? |
Posted By: CC2001-86
Date Posted: June-02-2010 at 12:45am
|
Hi, Do you still have the Deluxe rear seats for an 1986 Nautique? Very interested! Let me know what you have if you do.
Thanks Luke ------------- Thanks Luke Barker 210-219-0048 |
Posted By: Chopper
Date Posted: June-02-2010 at 5:42am
|
I'm chasing the rub rail end caps port & starbord side to suit 91 or newer
Cheers, Andrew ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1540&sort=&pagenum=2&yrstart=1996&yrend=2000 - 98 Ski |
Posted By: Jtandy
Date Posted: June-06-2010 at 1:37am
| do you have a dip stick tub for a 351 w thx jt. |
Posted By: jschultz
Date Posted: June-06-2010 at 11:27pm
|
Dear Don,
I would like to know if you have a water inlet plate available for a 1993 Ski Nautique. If you do, please include the screws. ------------- Joe Schultz |
Posted By: Dave D.
Date Posted: June-08-2010 at 4:54pm
|
I am looking for a swiveling adjustable observer seat base for my '89 Sport. Used or new if anyone knows where to find one. Thanks! ------------- Dave D. http://www.correctcraftfan.com/diaries/details.asp?ID=5525&sort=&pagenum=4 - '89 Sport Nautique http://www.golaketravis.com/webcam/ - Lake Travis, Texas! |
Posted By: steve600
Date Posted: June-09-2010 at 12:50am
| Need 71c borg warner for 1984 2001 in good working order. Any chance you have one? |
Posted By: skfitz
Date Posted: June-09-2010 at 1:13am
| Starboard manifold for 351, complete from head to hose? |
Posted By: jellman83
Date Posted: June-29-2010 at 5:40pm
|
I called you a week ago still looking to hear back on seat, seat base with tracks for 1983 ski natique also looking for ski pylon for same can you email me pictures and prices
Dave @ drj101@juno.com |
Posted By: blink
Date Posted: June-30-2010 at 1:46am
|
Don Iam looking for a back of a rear seat for my 94 nautique email me at blinkey@comcast.net thanks ------------- BTW looks like I lost my 82-2001 to sanity |
Posted By: kapla
Date Posted: June-30-2010 at 1:55am
I think I have those somwhere....I'll look for them and let you know...sure they will need some paint as they were dented.... ------------- <a href="">1992 ski nautique |
Posted By: chessloveedit
Date Posted: June-30-2010 at 7:15pm
| I have a mid 90's gt40. I need an alternater. If you have one I am interested. Thanks, pm me. |
Posted By: wakeboarder185
Date Posted: July-01-2010 at 12:44am
|
Hey Don,
I have a 1992 Ski Nautique, Do you have the speedometer that say nautique or correct craft on them? Also Do you have the teak swim platform? What other gauges do you have? And what are the prices? Thanks, Reid |
Posted By: Whitfield
Date Posted: July-01-2010 at 2:08am
Pair of 1992 seat bases (lower part seat mounts on) ~ could be from any similar design. ------------- Michael .... I'm the black sheep ~ 1984 Dixie 299 Super Skier (350 Chev PCM / counter rotation / Velvet drive) Open Bow. |
Posted By: MartyMabe
Date Posted: July-01-2010 at 3:38am
|
Whitfield, really no good used seat track slides out there. Here's where you get the 'NEW' stuff
http://nautiqueparts.com/driversseatslidecomplete.aspx - Seat Slides http://www.n3boatworks.com/eshopitems_cat_5045-67963-68881_limit_n.more.htm - Again Seat Slides http://www.nautiqueskins.com/ - Christine's Skins http://www.nautiqueskins.com/New_Listings.html - again more seat tracks  ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: MartyMabe
Date Posted: July-01-2010 at 3:42am
|
wakeboarder185
http://nautiqueparts.com/speedometerairguide-usedonnautiquesto1999.aspx - speedo http://nautiqueparts.com/gauges_top.aspx - Guages Swim platform in CCFan store---have you seen those? ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: MartyMabe
Date Posted: July-01-2010 at 3:47am
|
cheeseloveedit
http://nautiqueparts.com/engine_parts_elect.aspx - alternators ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: Whitfield
Date Posted: July-01-2010 at 12:25pm
I'm good with tracks and slides ~ (Fat stack of useless import car stuff). It is the polly angled seat base I'm after. Previous owner made some boxes out of 2x6's and mounted them to the floor with 30+ Deck screws each. I'm looking to improve on his design. ------------- Michael .... I'm the black sheep ~ 1984 Dixie 299 Super Skier (350 Chev PCM / counter rotation / Velvet drive) Open Bow. |
Posted By: MartyMabe
Date Posted: July-01-2010 at 2:45pm
|
http://nautiqueparts.com/driversseatbaseonly.aspx - seat base ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: jellman83
Date Posted: July-01-2010 at 6:15pm
| are you looking to sell the seat base or what |
Posted By: sailor x
Date Posted: July-02-2010 at 1:12pm
| Don...I'm looking for a front observers seat for my 1980 SN...lost mine four days ago. Can you help me out? Thanks, Peter |
Posted By: 82wake2001
Date Posted: July-05-2010 at 4:55pm
|
how about the full ski pylon for an 82 ski nautique.....someone hacked mine off before i bought it?? ------------- Joe 1982 ski nautique 2001 "Lady of the Wake" |
Posted By: Hawktique
Date Posted: July-05-2010 at 7:37pm
I'm looking to get rid of my '90 factory pylon. Let me know if you'd be interested. josh.moore81@yahoo.com ------------- "A Veteran is someone who at one point in his life, wrote a blank check made payable to: 'The United States of America,' for an amount of 'up to, and including his life." Semper Fi |
Posted By: RobertsMosley
Date Posted: July-06-2010 at 8:42pm
|
I have a 1991 model Correct Craft,
I'm needing a few items... 1)front nav light (complete) 2)brake surge control unit for trailer 3)Shower pump (that mounts under floor in rear) 4)glove box 5)speedo gauges (or somewhere I can get mine rebuilt) Can you help ? Thanks! |
Posted By: vixen
Date Posted: July-13-2010 at 9:15am
| Looking for a fuel tank for a 81 model. |
Posted By: blackbeard
Date Posted: July-14-2010 at 6:47pm
|
Looking for fresh water inlet screen basket for 82 Ski Nautique 2001.
Thanks in advance, D. ------------- Be Cool !! Be Safe !! It all about Having FUN!!!! http://correctcraftfan.com/diaries/details.asp?ID=5271&sort=&pagenum=5 - Dee Dee's 82 SN 2001 |
Posted By: phatsat67
Date Posted: July-14-2010 at 9:39pm
| how about some used chevy exhaust manifolds? |
Posted By: 85skinautique
Date Posted: July-15-2010 at 8:58pm
|
I'm looking for clock for 1985 Ski Nautique 2001. Drop me a call (440) 915-5900. Thanks, Matthew ------------- 85skinautique2001 |
Posted By: 84nautique
Date Posted: July-17-2010 at 6:35am
| Don, do you happen to have a windshield for an 84 2001. If so how much do you want for it? Thanks Scot.. |
Posted By: Chopper
Date Posted: July-20-2010 at 5:28am
That's great Seb. Let me know.! ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1540&sort=&pagenum=2&yrstart=1996&yrend=2000 - 98 Ski |
Posted By: davidgaraffa
Date Posted: September-01-2010 at 4:32am
| I am looking for the Morse tilt steering parts for my 91!! will you please let me know if you have the tilt hub and plastic joint? |
Posted By: clancy3910
Date Posted: September-01-2010 at 12:44pm
| Hi Don, do you have a windshield and frame for 1982 Ski Nautique? It was the first 2001 model without the numbers. Any help is apprecaited. |
Posted By: 82 Nautique 1
Date Posted: September-01-2010 at 2:12pm
|
Looking for steering wheel for 1988.
If available do you have pictures & price ------------- Original Owner " Dennis" http://www.correctcraftfan.com/diaries/details.asp?ID=4855" rel="nofollow - 1982 Nautique |
Posted By: joes83sn
Date Posted: September-01-2010 at 5:46pm
| im looking for a snap on back seat back cushon for my 83 |
Posted By: 82 Nautique 1
Date Posted: September-12-2010 at 11:22pm
|
Any guages for 1988 Ski Nautique ?
Clock or hour meter ------------- Original Owner " Dennis" http://www.correctcraftfan.com/diaries/details.asp?ID=4855" rel="nofollow - 1982 Nautique |
Posted By: Tantrum1
Date Posted: October-16-2010 at 4:55pm
|
Got a Raw Water Pump for a 92, 351??? ------------- Gravity works..........I've tested it often!!! |
Posted By: pmgIA
Date Posted: October-30-2010 at 8:00pm
|
Any chance you have the bow cushion for a 93 Sport? ------------- 1993 Correct Craft Sport (for sale) 1979 Correct Craft Ski Nautique (sold) |
Posted By: W3pdx
Date Posted: November-01-2010 at 7:51pm
|
Don:
Do you have a ski pylon for a 1988 Martinique? Bill Kraeling |
Posted By: Vancouver Matt
Date Posted: December-01-2010 at 6:26pm
|
Hi Don,
I require the following. 1989 Ski Nautique 2001 Observer Seat Brackets if in good shape. The ones where you lift the observer seat up to access the bow. 1989 Ski Nautique 2001- White face speedo. If fully operational. Regards, Matthew ------------- Matthew |
Posted By: newoldboat
Date Posted: December-01-2010 at 10:55pm
| Hey Don, I'm looking for a rear seat and observers seat for a 90 SN. Actually if you have anything for a 90 SN let me Know! Thanks. |
Posted By: jaspaarky
Date Posted: December-17-2010 at 3:54pm
|
Do you have an exaust manifold that will fit an 87 Barefoot with the 454? ------------- Jason |
Posted By: Swatkinz
Date Posted: December-23-2010 at 9:11pm
I need both ski racks and the small square shaped teak mount pieces that screw into the floor. I also need the rotomolded plastic observer seat base and the plastic center seat base for the rear deluxe interior seat. Steve 803-466-2808 swatkins13@sc.rr.com ------------- Steve 2011 Sport/Air 200 Excalibur 343 2017 Boatmate Tandem Axle Trailer Former CC owner (77, 80, 95, 88, all SNs) Former Malibu owner (07, 09) |
Posted By: Double Up
Date Posted: January-02-2011 at 3:42pm
|
I have a 90 sport and was looking for a complete windshield or just anything I could use to fabricate a windshield. ------------- 1990 Sport Nautique |
Posted By: indian67
Date Posted: January-03-2011 at 12:02am
| I need a RING and Finger for a 86SN 2001? Do you have one that will fit my boat? Thanks, Jerry |
Posted By: Ed
Date Posted: January-17-2011 at 10:22pm
| Do you have a set of small block ford exhaust manifolds and risers? |
Posted By: dwcar
Date Posted: January-17-2011 at 10:49pm
|
Ed,
Welcome to the site. I think you would be better off buying those items new. Try MyCorrectCraftparts.com or discount inboard marine. ------------- 83Ski |
Posted By: Ed
Date Posted: January-17-2011 at 11:02pm
| Thanks for the welcome! I think you're right, new are a better way. I need a thermostat housing as well. |
Posted By: SSIDSKI
Date Posted: January-17-2011 at 11:30pm
|
Just let me know what parts of the thermostat housing you need i have plenty Thanks Don ------------- SSIDSKI-FLORIDA |
Posted By: Ed
Date Posted: January-17-2011 at 11:50pm
| Do you have an upper and lower for a Crusader 302? |
Posted By: Sjm78
Date Posted: February-21-2011 at 4:28pm
|
I am in need of an 11A Rudder for my Ski Nautique. Any chance you can help?
|