WHO CAN REBUILD MY V-DRIVE?
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=19494
Printed Date: April-18-2024 at 5:44pm
Topic: WHO CAN REBUILD MY V-DRIVE?
Posted By: Al
Subject: WHO CAN REBUILD MY V-DRIVE?
Date Posted: September-19-2010 at 2:39pm
I have a 05' walter v- drive that wont turn who should I have rebuild it ? or what should I check first?
|
Replies:
Posted By: 75 Tique
Date Posted: September-19-2010 at 3:06pm
Eric Lavine at http://www.fantasticfinishmarine.com/ - fantastic finish marine and active member of this site is your guy.
------------- _____________ “So, how was your weekend?” “Well, let me see…sun burn, stiff neck, screwed up back, assorted aches and pains….yup, my weekend was great, thanks for asking.”
|
Posted By: eric lavine
Date Posted: September-20-2010 at 10:11am
I have ton of Walters hard parts laying around, mostly at o cost, usually I can keep them in the 8 hundy range because of this, call me if you need to 330-273-8291. did you hit something? or run it out of oil?
Eric
------------- "the things you own will start to own you"
|
Posted By: eric lavine
Date Posted: September-20-2010 at 10:14am
good thing you guys dont have Mastercraps, the one model transmission which is pretty common. the dipstick is $86.00 thats ZF stuff
------------- "the things you own will start to own you"
|
Posted By: Munday
Date Posted: September-20-2010 at 11:26am
Deal with Eric,if you have to deal with Walters take a hand full of Tums and keep the roll close!
Munday
------------- If the only tool you have is a hammer,everything starts to look like a nail.
|
|