METAL C.C. Logos (Emblems)
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=28501
Printed Date: April-28-2024 at 9:43am
Topic: METAL C.C. Logos (Emblems)
Posted By: ArtCozier
Subject: METAL C.C. Logos (Emblems)
Date Posted: December-06-2012 at 7:49pm
|
At long last, exact replicas of the original "Pot Metal" script logos that were on the rear quarter of boats through the 1960s. Cast in ASTM 316 stainless or CDA 862 marine bronze. I will sell them either polished and ready to install or unpolished. Unpolished ones are smooth and have a finish that looks as though it has been glass-bead blasted. They can be hand-polished (A lot of work!) or electropolished (Expensive!) The polished bronze ones are coated with a clear finish to slow down the tarnishing. Pricing: Polished -- Either metal: $90.00 Unpolished -- Either -- $55.00  ------------- "Art" |
Replies:
Posted By: Hollywood
Date Posted: December-06-2012 at 7:52pm
|
Cute. ------------- |
Posted By: Hussler
Date Posted: December-06-2012 at 8:17pm
| My god, the stainless look beautiful, is this a limited time offer/ limited number you have? What does the stainless look like unpolished? |
Posted By: TRBenj
Date Posted: December-06-2012 at 8:46pm
|
Those look awesome... and the pricing looks great too! I had some brass and aluminum versions cast in the last year or so and my vendors couldnt touch your prices. If this is a limited run, I'll be grabbing a few just in case! ------------- |
Posted By: 8122pbrainard
Date Posted: December-06-2012 at 8:49pm
|
Art, From the pictures, they look great. All the relief in them (per the original zinc die casting) that you will not get with a waterjet. I've stated it many times to members who have come up with the waterjet idea that it will not work,  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Mojo
Date Posted: December-06-2012 at 9:19pm
|
You can see that the polishing really rounds the edges of the letters, but they look really nice.. Best alternative so far for sure.. ------------- 05' SV211 TE 73' Martinique had:96' SNOB had:76' Nautique had 77 Tique |
Posted By: ArtCozier
Date Posted: December-06-2012 at 11:04pm
|
Thanks for the responses, guys. In a word, "yes," I will be able to get future supplies. The casting vendor will run them for me in small batches when he is not busy with "real" projects. Then I have to send them to the polishing vendor, so, as is said, nothing good ever comes quickly! I have a half-dozen or so of the stainless on hand. Art ------------- "Art" |
Posted By: Gary S
Date Posted: December-06-2012 at 11:25pm
|
Is that each Art or for a pair? Would you be bringing some to the river run? Thanks for your efforts. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: quinner
Date Posted: December-07-2012 at 12:17am
|
I would like to buy a vowel please ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1143" rel="nofollow - Mi Bowt |
Posted By: ArtCozier
Date Posted: December-07-2012 at 12:31am
|
Yes, I do plan to bring some to the SJRR, providing the casting vendor can supply me by then. ------------- "Art" |
Posted By: Got Tiques
Date Posted: December-07-2012 at 12:48am
|
Art, Please reserve one pair of polished stainless for me. I understand they are $90 each. Send me a PM, and we can work out shipping costs and payment. They look really great, and I have a boat for them. Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: nautique frk
Date Posted: December-07-2012 at 5:25pm
| Art, I would like a set of the polished stainless ones Send me a PM for info on payment etc. Thank you these look great !!! |
Posted By: dwouncmd
Date Posted: December-07-2012 at 5:52pm
|
Very nice! Without an old boat, one could buy a couple and mount on the wall until the need to put them on a boat arises. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=6535&sort=&pagenum=2" rel="nofollow - 89 SN <a href="http://www.correctcraftfan.com/diaries/details.asp?ID=6567&sort=&pagenum=1" rel="nofollow">7 |
Posted By: phatsat67
Date Posted: December-07-2012 at 8:02pm
|
If those don't look good enough than you've got more problems than boat emblems! Great work! |
Posted By: Hollywood
Date Posted: December-07-2012 at 8:08pm
|
TRBenj knows all about collecting parts for fictitious boats. ------------- |
Posted By: juniorwoody
Date Posted: December-07-2012 at 8:23pm
|
Like to see an Atom Skier for my dash. ------------- The value of money spent on new adventure far exceeds the value of money saved for the future |
Posted By: ArtCozier
Date Posted: December-08-2012 at 2:45pm
But there are a total of three vowels in "Correct Craft!" Art ------------- "Art" |
quinner wrote:Posted By: fishnut
Date Posted: December-09-2012 at 3:04am
|
Art, Please send me a PM so that I can purchase a set of the polished stainless. Looks great! Thanks, Michael ------------- '86 Fish Nautique (current project) '89 Ski Nautique (sold) '81 Cuddy Nautique (sold) |
Posted By: DrStevens
Date Posted: December-09-2012 at 9:17am
| Looks great, I am ready for a set! |
Posted By: Yellowbird
Date Posted: December-09-2012 at 12:44pm
|
I will take two chrome emblems. Please send me an address to send a check. Stevetodisco1@gmail.com. |
Posted By: Tonali_III
Date Posted: December-09-2012 at 6:53pm
|
WOW! Art! Those look great! I almost wish my Southwind had come with those. BTW, Pete, I picked up my boat from the shop last week. Floor turned out pretty good. I will post a link for a few pics on my diary when I get the chance. ------------- http://correctcraftfan.com/diaries/details.asp?ID=553&sort=&pagenum=1" rel="nofollow - 1974 Southwind 20 <a href="http://www.correctcraftfan.com/diaries/details.asp?ID=6752" rel="nofollow">1972 Mustan |
Posted By: ArtCozier
Date Posted: December-09-2012 at 10:35pm
The setup charge for the mold would shock you! Plus, we have to have a good one to make the mold off of. ------------- "Art" |
Posted By: ArtCozier
Date Posted: December-09-2012 at 10:55pm
|
Hussler.... The stainless unpolished look like smooth stainless that has been bead blasted. It's coarser than a satin finish. Maybe about like 400 grit sandpaper. Art ------------- "Art" |
Posted By: Ski Fury
Date Posted: December-16-2012 at 11:51pm
|
Hey Art, It is Clay Reedy. I'm excited to see the great feedback. I hope these will continue to be a big hit. Clay ------------- Clay Reedy |
Posted By: OverMyHead
Date Posted: December-16-2012 at 11:59pm
Truly a work of "Art"  ------------- For thousands of years men have felt the irresistible urge to go to sea, and many of them died. Things got better after they invented boats. 1987 Ski Nautique |
Posted By: Vintagebike
Date Posted: February-26-2013 at 3:12am
| I've been off the forums for awhile working on my Tahoe 160. I would like to buy a pair of polished side emblems. Can you send me a PM with the particulars? |
Posted By: Lakeview
Date Posted: February-26-2013 at 11:11am
|
Please send me a PM with details,I would like a pair of Stainless logo's. Thanks,Great job on the repro! ------------- Lakeview 1992 Barefoot Nautique 1967 Barracuda SS 1967 Chris Craft Cavalier |
Posted By: Got Tiques
Date Posted: February-27-2013 at 12:04am
|
Art, I hope I am still in line (since Dec 6)for a polished stainless steel set. Just Email me back when you have a set ready to ship, and Ill send you a check. Just need to swap mailing info. Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: Riley
Date Posted: February-27-2013 at 9:54am
| Art must have 100 people on that list. |
Posted By: ArtCozier
Date Posted: February-27-2013 at 12:17pm
|
Not literally a hundred, but it's long. I just hope my vendor will continue to help us out. ArtC. ------------- "Art" |
Posted By: Yellowbird
Date Posted: March-11-2013 at 3:09am
|
Art, I will take two polished. Please email me your address. Stevetodisco1@gmail.com |
Posted By: ScottZ
Date Posted: March-19-2013 at 2:57am
|
Hey Art, Those look great. Do you ever see producing the Ski Nautique dash plaque? Scott ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: ArtCozier
Date Posted: March-19-2013 at 1:06pm
|
Hey Art, Those look great. Do you ever see producing the Ski Nautique dash plaque? Scott Scott, the setup charge for making the mold would scare you silly! I know there is some demand for them, and my vendor could probably make them, but being smaller than the CC logos I think the cost might be higher. Art ------------- "Art" |
Posted By: ScottZ
Date Posted: March-19-2013 at 4:44pm
|
Got you. I will give you a call sometime soon to catch up. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: Candlwoodsteve
Date Posted: March-24-2013 at 8:36am
can I get on the long list of people who want a set of stainless cc logo emblems? they look awesome! 
|
Posted By: ArtCozier
Date Posted: March-26-2013 at 3:31pm
|
Can do. I have some on hand. Sending you a PM. ------------- "Art" |
Posted By: Morfoot
Date Posted: March-26-2013 at 3:45pm
|
Just a heads up for any of you interested in a set. Art brought these things in to show a few of us while we were having breakfast and coffee this past weekend and the pictures do not do them justice. These things are beautiful! ------------- "Morfoot; He can ski. He can wakeboard.He can cook chicken.He can create his own self-named beverage, & can also apparently fly. A man of many talents."72 Mustang "Kermit",88 SN Miss Scarlett, 99 SN "Sherman" |
Posted By: fishnut
Date Posted: April-14-2013 at 1:37pm
|
I bought a set of the stainless, polished emblems from Art recently & just want to let everyone one know these are very high quality! If you are considering buying these, I think you will be very pleased. Thanks for producing these, Art. ------------- '86 Fish Nautique (current project) '89 Ski Nautique (sold) '81 Cuddy Nautique (sold) |
Posted By: 67ccmustang
Date Posted: May-01-2013 at 2:51pm
Posted By: ArtCozier
Date Posted: May-01-2013 at 5:17pm
|
I currently have two pairs that are not spoken for. I'll send you a PM with details. Art ------------- "Art" |
Posted By: blammie
Date Posted: May-20-2013 at 3:46pm
|
Hey Art, What is the status of your supply. My Barracuda was complete two days ago , and today one of my emblems is broken. I can't figure it out. Anyways, I would like a set of the stainless, unless you might have an original laying around, and in that case one would work. On that note. Did any of the guys who bought these previously have singles? I would gladly pay $90 for somebody's original if they have one laying around. It's gonna drive me nuts until I make this right. |
Posted By: ArtCozier
Date Posted: May-21-2013 at 12:11am
|
I currently have one pair left with no name on them, and another pair that one of our members said he wanted but I have not heard back from him nor has he answered my queries about whether he really wants them. I am at Callaway Gardens all this week helping with the Masters, but I did bring both pairs with me. If you are anywhere near here, you could have a pair instantly. I do have the one original one from which the mold was made, but I need to keep it in case anything ever happens to the mold. Also, the guy I deal with at the foundry might retire at the end of this year, so I have to make a decision as to whether to order more now in case my source disappears. Nothing ever comes easily! If you want to call me, my cell # is 407 760 1249. Cell service is spotty at Callaway, so if you don't get me, please leave a message and I'll get back to you. Art ------------- "Art" |
Posted By: blammie
Date Posted: May-21-2013 at 12:17pm
| Consider me in for a set. I am working the next three nights, but will be off for the weekend. I will try to reach you this weekend or early next week. Thanks. |
Posted By: MPienta
Date Posted: June-18-2013 at 9:53pm
|
Hello Art, I would be interested in a set of polished emblems from the next production run. Regards, Michael Pienta |
Posted By: ArtCozier
Date Posted: June-18-2013 at 11:05pm
|
Brett and Michael.....I still have the two pairs mentioned above. They are available now. Please P-M me for details if you like. Otherwise you can use my regular email at acozier@nautique.com Thanks, Art ------------- "Art" |
Posted By: blammie
Date Posted: June-19-2013 at 6:53am
| Got mine about a week or two ago. You will not be disappointed Micheal. |
Posted By: Capn Dan
Date Posted: June-24-2013 at 1:18pm
|
Is the price per pair? ------------- Capn Dan |
Posted By: ArtCozier
Date Posted: June-24-2013 at 1:40pm
|
Capn..... No, the $90 is per each, plus shipping, which normally has been running $15-$20 in the eastern half of the Country. Right now, the two pairs that I have on hand are spoken for. If you only need to replace one, I know of an individual who bought a pair from me and has one used original one off his boat that he wants to sell. I expect another shipment of stainless steel ones in a few weeks. Art ------------- "Art" |
Posted By: 63 Atom Skier
Date Posted: June-24-2013 at 2:56pm
I too would be VERY interested for the "Atom Skier" dash emblem - been looking for one of these for a while. ------------- Jason |
Posted By: Gary S
Date Posted: June-24-2013 at 4:39pm
|
Unfortunately Jason I'm sure that Art will tell you the cost to develop these for you and maybe a couple of others would be prohibitive ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: scootdogydog
Date Posted: June-27-2014 at 10:50am
|
I just ordered a pair. In a PM with Art, the business that helps him help us out with these is being sold. He isn't sure if he'll be able to get them anymore, but ordered one more batch. It might be wise to put an order in with him so that he can get a better estimate of future demand. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=7183" rel="nofollow - 1999 Python 1980 Ski Tique 1968 Mustang WIP |
Posted By: MartyMabe
Date Posted: June-27-2014 at 11:41am
Does anyone have access to a 3-D Printer? Those things are amazing. We have "WorkShops" here in the area.. You pay $40 a month and have access to all kinds of machines. A New Workshop just opened up and it has the 3-D Printer. If I could get my hands on some of these " Scripts " ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: gpope65ccb
Date Posted: July-02-2014 at 2:16pm
|
Hi Art! It's Gary, with the '65 Barracuda SS. I just ran across your post on the logos and I need (2) for my boat in polished SS. Do you still have them? Once again, you're very helpful! |
Posted By: ArtCozier
Date Posted: July-02-2014 at 6:13pm
|
Yes, in fact you have drawn the lucky straw. I have one pair left from the current batch, and I have more on order. However, this will be the last pair at the current price. Casting vendor has raised the price, so since this is a break-even situation, I will have to raise accordingly. As you probably know, they are $90 each. Freight to most of the eastern part of the country runs $20 via UPS, so, in round numbers, $200 for a pair. If you send my your address, I can give you an exact freight quote. The way I have been doing this is to have you mail me a check; I'm too old to understand PayPal and all that stuff. Also send your phone contact number and your outside email address. The day or the day after I get the check, I will ship them and UPS will advise you by email that they are on the way. ------------- "Art" |
Posted By: 63 Atom Skier
Date Posted: July-06-2014 at 11:08am
|
I'm still interested in the Atom Skier logo (picture of script above) - just thought I'd throw that back out there... ------------- Jason |
Posted By: nautique74
Date Posted: July-09-2014 at 4:51pm
|
I bought a set of emblems from you, off ebay last year and had them chromed and they look great. I have found out since that there are two sizes of emblems, the ones I bought are the small emblems. Do you have the large ones? ------------- 1974 Ski Nautique |
Posted By: ArtCozier
Date Posted: July-09-2014 at 6:09pm
|
Now I'm confused. (not an unusual condition for me! :) I have never, ever sold a single item via ebay. Was it you who tried to pay me by PayPal and I couldn't get it to work? The emblems that I am selling are about 14-1/2 inches long. do you mean the smaller Ski Nautique emblems that are on the dashboards of the boats? They are about 8" long. You had the stainless chromed? ------------- "Art" |
Posted By: matthewbmiceli
Date Posted: December-04-2014 at 9:09pm
|
Hello, could you give me the information for ordering a set in polished stainless. Thank you. Matthew Miceli 352-396-6342 matthewbmiceli@gmail.com |
Posted By: 8122pbrainard
Date Posted: December-06-2014 at 10:46am
Jason< Are you still around? I and I'm sure everyone would enjoy seeing some pictures of the Atom. If it's anything like the picture you posted, it's beautiful! Did you ever find the emblem? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: matthewbmiceli
Date Posted: December-06-2014 at 5:52pm
| I am looking for the long emblems that go on the port and starboard act hull sides on an early Ski Nautique. 1974 |
Posted By: Gary S
Date Posted: December-06-2014 at 6:02pm
|
I'm thinking Pete that he just used that picture to show us what he needs--- ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: 8122pbrainard
Date Posted: December-06-2014 at 7:06pm
The thought crossed my mind as well since the dash emblem is there. If true, who's Atom is that? Anybody know? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Capn Dan
Date Posted: December-07-2014 at 10:34am
|
I am also interested in the SS emblems that spell out correct craft ------------- Capn Dan |
Posted By: 63 Atom Skier
Date Posted: December-08-2014 at 2:28pm
|
Yup...still around, and I read the forums almost daily for the last four years (although I need to be a bit more of an active participant)! No I have not found the Atom Skier logo yet (ohhh what I'd pay to get one of those). I've thought about having one locally reproduced, just haven't gotten around to it yet. I'm pretty sure I pull that photo from Somebody Dave's "Still Sking", that I know he just sold. The boat I own was actually purchased off this site about four years ago from a guy in northern Indiana who also purchased it off this site about fourish years prior to me from a guy in eastern Wisconsin. If anyone can fill me in on any of the history you guys might know on this boat I'd appreciate it! Often thought about calling the Wisconsin owner...should really do that. Regardless, I absolutly love the boat and use it often (weekly) with my family in the Spring Lake area of Western Michigan. Done a lot of cosmetic and mechanical upgrades to the boat, with the last being a re-varnish of all the horizontal surfaces...really turned out nice (Pete - it's also worth mentioning I'm stickler for originality too!). The boat gets lots of waterski action with our vintage skis as well - tons of fun. Often thought about hauling it over to Green Lake, but I guess I really need to get to know some of you guys first! ------------- Jason |
Posted By: TRBenj
Date Posted: December-08-2014 at 2:37pm
Search for an old post by member "Stan C". He has reproduced the white/black plastic emblems that cc used from 71-78. While we're de-railing Art's thread, I'll mention that I have a set of the smaller chromed metal Correct Craft hull emblems if anybody is looking for a pair. Carry on! |
Posted By: mustangdude
Date Posted: May-05-2015 at 3:17pm
| Metal logos still available? 810-513-2214...Thanks |
Posted By: Paul H
Date Posted: May-06-2015 at 1:32pm
|
Ok so is 90 for a set of two or for one. How do I get a set. Payment shipping ect. I want stainless. - Polished Thanks Paul |
Posted By: scootdogydog
Date Posted: May-06-2015 at 1:40pm
|
As far as I know, the guy that made them increased costs or Art found someone else that charged a bit more, so you might be out of luck at least at the previous price. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=7183" rel="nofollow - 1999 Python 1980 Ski Tique 1968 Mustang WIP |
Posted By: Paul H
Date Posted: May-06-2015 at 1:56pm
|
I wil take a set of the stainless as soon as you can get them to me 248-804-3496 Thanks Paul |
Posted By: Capn Dan
Date Posted: May-07-2015 at 9:06am
|
I too need the SS emblems for the sides of my boat. Would someone please take action. ------------- Capn Dan |
Posted By: ArtCozier
Date Posted: February-24-2016 at 12:00pm
|
I need to update this post. I now have another batch ready to go; had to raise the price to $100 to cover my costs. This could be the last batch, the casting company has been sold and I don't think the new owner will do these for me at the price I've been paying. More later. ------------- "Art" |
Posted By: 8122pbrainard
Date Posted: February-24-2016 at 12:23pm
|
Art, You may have to send the pattern over to China where the EPA isn't shutting down every foundry here in the states!  All the regs are good as long as the foundry can afford installing all the control devices. The regulations have been weeding out the small guys for years!------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: ArtCozier
Date Posted: February-24-2016 at 12:39pm
|
Good idea, Pete. Recently we at CC have been able to send a CAD drawing file of a part to China and have a cast prototype part in our hands in about two weeks! ------------- "Art" |
Posted By: Capn Dan
Date Posted: February-24-2016 at 7:04pm
|
I would like the polished CC emblems. Please send me a PM and total cost. ------------- Capn Dan |
Posted By: Capn Dan
Date Posted: February-24-2016 at 7:13pm
 My 1965 Ski Nautique.------------- Capn Dan |
Posted By: ArtCozier
Date Posted: February-24-2016 at 9:54pm
|
Sure, I'll PM you the details. As you might have seen in today's post on my original ad from 12/6/12, I have had to raise the price to keep up with the casting vendor's increase. They are now $100 apiece and I will include the mounting hardware. That sure is a nice looking '65 SN. I had a '65 that is actually responsible for my getting into this whole skiing/boating game. It was Hull #1422. Do you know the hull number of yours? Does it have a 312 in it? I can't tell for sure from the photo if your deck is white or light turquoise. Mine was all white; I bought it from Leo Bentz in '66. That was when I first met him. PM follows. ------------- "Art" |
Posted By: Chevy350
Date Posted: February-26-2016 at 10:34pm
 I wasn't sure if I should post it here, but I saw someone mention something about the Black and white emblems and I was looking at a photo of our boat from the '90s and I saw it had them. Does anyone know where to find these? I looked up Stan C, but he hasn't been on since 2007 I'm pretty sure. ------------- 1972 Mustang |
Posted By: Gary S
Date Posted: February-27-2016 at 12:08am
|
Try this Justin http://correctcraftfan.com/forum/forum_posts.asp?TID=1129&KW=&PID=5693&title=new-correct-craft-cript-emblems#5693" rel="nofollow - link ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: Paul H
Date Posted: February-27-2016 at 10:10pm
| I want two stainless emblems for my fully restored 1963 Tahoe 160 . Please |
Posted By: Paul H
Date Posted: February-27-2016 at 10:16pm
| Does anyone know what happens that 1965 Tahoe mahogany color . If the owner wants to change the motor to something else I would be interested in it for top dollar . I need the heat exchanger to complete my boat 100 percent. There were some questions on the site regarding va Luella and numbers produced. I'd buy the boat if I had to. Where is the post... |
Posted By: Capn Dan
Date Posted: February-28-2016 at 9:50am
|
I'll have to check the hull number. She is under wraps for the winter right now. Deck is baby blue. she has the Ford 312 that has been tricked out and chromed. Sounds like glory. ------------- Capn Dan |
Posted By: 8122pbrainard
Date Posted: February-28-2016 at 10:19am
Paul, Filling us in on specifically what you need would help. The trans cooler or do you have the Gray Marine aluminum with the closed cooling with the heat exchanger? Do you have the old one? Can it be repaired? BTW, I suggest starting a new post since you may not get much response in this logo thread. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Paul H
Date Posted: February-28-2016 at 2:51pm
|
Yes it is a closed cooling system . I currently run it with all fresh water.. I have the original exchanger. However someone let it freeze . I sent. It to van Es engineering. In New Jersey Theydeal with grey marine they either didn't want to dea l with it or couldn't fix it. It's all bronz plate exchanger about 15 inches by 6 and about 3 inches thick .. Made by sendure it have sent the exchanger to them also for possible re make. No real luck there either. I a m t old by an old timer that they are pretty rare but they were possibly the most efficient exchangers produced. I live in Detroit we still make things here and there are skilled people in this area so perhaps I can get it fixed locally. However my best bet would to be .buy a motor that would also provide me with a extra set of exhaust manifolds. That post with the mahogany Tahoe. I would pay him half the cost of the boat for the motor only. Those 215s are hand grenades and they leak oil out of the rear main it's a rope seal. They are not very powerful. To do them rite you have to have someone like d and d who specializes in that motor only to build it and make it rite. Mine is about 220 hp . And runs really smooth. I had the advantage that guyi is about 6 miles from where I live . He generally gets 4-6 thousand to do a motor. I worked things out with him and did not have that much in to it.. I recently posted a pic of the boat on diaries. I do not know if it's up yet.. I also have a 1963 atom delux ..I also bought that hot rod special that was for sale . I am currently looking for someone to restore it. |
Posted By: Paul H
Date Posted: February-28-2016 at 2:53pm
| What is the story on those emblems. I want some |
Posted By: 8122pbrainard
Date Posted: February-28-2016 at 3:44pm
Paul, When you say "bronz plate", do you mean brazed plate? If it's a brazed plate rather than a tube in shell, you can pretty much kiss it goodbye. Once all the plates are sent through the oven to be brazed together, there's now way of opening it up again. Didn't http://www.sen-dure.com/" rel="nofollow - Sen-Dure have a replacement that was close? I see they also make tube in shells which is another possible route. They should be able to tell you the BTU rating at a given delta T and a given GPM of your old one and cross that into one of their tube in shells. The only problem as you have mentioned is the size. BTW, there are many manufacturers of brazed plate's. Not too long ago, I picked one up off Ebay real cheap!! I take it Van Ness checked their inventory of all the NOS Gray parts they acquired and didn't find the cooler correct? I wouldn't be running straight water in that engine with it being aluminum. You are taking a big chance with white rust (corrosion). Also, 220 HP isn't at all bad plus, the power to weight ration is the reason Buick developed that engine. You have plenty for that Tahoe! ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: ArtCozier
Date Posted: February-28-2016 at 11:26pm
Hello Paul..... I just sent you a Private Message via this website. No problem getting you the emblems. Art ------------- "Art" |
Posted By: Dan P
Date Posted: September-07-2016 at 12:12pm
|
Are these emblems still available ? What is the current price for a pair including shipping? I to would be interested in the Atom Skier Emblems. Thanks Dan 262 677 4670 ------------- Dan P |
Posted By: ArtCozier
Date Posted: September-07-2016 at 4:08pm
I have a good supply of the polished stainless steel logos that read "Correct Craft" and were on the rear quarter of all boats late 1950s through about 1973. They are $100 each plus shpping, which usually runs less than $20 in the continental U.S. I don't have any dashboard emblems, which I think your Atom Skier logo must be. I think I do have one Mustang "Pony and Name" logo. There is a photo of the Correct Craft ones under Boat Parts for Sale. Try a search "Metal Logos" or something like that. ------------- "Art" |
Posted By: BuonBuon
Date Posted: September-23-2016 at 7:30pm
 Hello Art, I am interested in purchasing two of the CC script emblems if they are still available. can you please send me a photo of what they look like and directions on how to purchase them from you. Thank you, Mike ------------- BuonBuon - 1968 Wildcat |
Posted By: 65 'cuda
Date Posted: September-23-2016 at 8:13pm
|
Beautiful boat, Mike. More pictures please! ------------- Gary http://www.correctcraftfan.com/diaries/details.asp?ID=941" rel="nofollow - 1965 Barracuda SS |
Posted By: BuonBuon
Date Posted: September-23-2016 at 8:48pm
   BTW, that's not me in the photo ;-), I have done various subtle improvements through the progression of these photos. ------------- BuonBuon - 1968 Wildcat |
Posted By: ArtCozier
Date Posted: September-24-2016 at 11:36pm
|
BTW, that's not me in the photo ;-), I have done various subtle improvements through the progression of these photos. [/QUOTE] Hello, and welcome to the website. That is a very nice-;looking Marauder. Have you had it for a long time? I have sent you a Private Message via this site giving you my email address and telephone number so that we can discuss the metal logos. There are photos of them under "Boat Parts For Sale" on this site. Search "Metal CC Logos (Emblems) and you will see the photo. I no longer do the brass ones. ------------- "Art" |
Posted By: Chris W
Date Posted: October-01-2016 at 5:19am
| Any chance the polished stainless correct craft emblems are still available for sale ?? |
Posted By: ArtCozier
Date Posted: October-01-2016 at 10:43am
Yes, I do. I also got your PM and answered there. My email address and phone # are in the PM, I look forward to hearing from you. ------------- "Art" |
Posted By: Southwind78
Date Posted: December-12-2017 at 1:17pm
| Are these still available to purchase? |
Posted By: ArtCozier
Date Posted: December-12-2017 at 6:50pm
|
Yes, I recently received what could be the last batch of them. I have had to raise the prices by $10, so the stainless steel ones are now $100 each plus the UPS delivery charge. The brass ones are no longer available. The reason that I said that this could be the last batch is that the company that casts them for me was, until recently, owned by a friends's father. He arranged for me to buy them at a price well below what it would have been without that connection. I don't think the new owner will extend that courtesy to me. Please email me direct at ACOZIER@NAUTIQUE.COM or call me at 407 760 1249. Thank you; please contact me! Arden ("Art") Cozier ------------- "Art" |
Posted By: ArtCozier
Date Posted: December-12-2017 at 6:59pm
|
Hello...... I was going back through some of the posts from back in 2012 when I posted the ad for the polished "Correct Craft" emblems (logos). I just got in what could be the last batch of them that will be available. I have had to raise the price by $10, so now $100 each. If you want you can contact me by email at ACOZIER@NAUTIQUE.COM or call me at 407 760 1249. Thanks, Arden ("Art") Cozier ------------- "Art" |
Posted By: 71Martinique360
Date Posted: June-01-2018 at 10:18pm
|
ArtCozier , do you have 2 of the 316 Stainless Steel polished correct craft emblems to sell? Thanks, Steve 240 298 5000 cell |
Posted By: ArtCozier
Date Posted: June-03-2018 at 7:05pm
|
I do have a number of them but they are not polished yet. The shop that was doing my polishing no longer offers that service. I think I have located a new source, will know for sure in a few days. Please email me direct acozier@nautique.com for details and arrangements for shipping. Arden "(Art") Cozier 407 760 1249 ------------- "Art" |
Posted By: Paul H
Date Posted: January-14-2019 at 3:23pm
|
HellO Hi I have a 63 Tahoe I would really like to get new CC emblems. I believe I have tried this when you first posted them for sale. Please let me Know if they are still available 63 atom skier 312 ford 63 Tahoe 215 buick 54 Hot rod special (Atom Skier) You can contact me at pauljhosner@yahoo.com or thru this site. Please let me know where to send the money . Thank you Paul Hosner |