Print Page | Close Window

GT40 pulley question Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Engine Repair Forum Discription: Engine problems and solutions URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=29646 Printed Date: May-02-2024 at 8:54am Topic: GT40 pulley question Posted By: Alcarlaw Subject: GT40 pulley question Date Posted: April-26-2013 at 6:38pm Hi All, Quickie for you all, are the pulleys on the waterpump and engine bolted into place and on a taper? Thnking on a quick repaint as the are a little corroded and were causing some belt dusting. I don't have a puller that would work with the pulleys so hoping they just unbolt.... Replies: Posted By: kapla Date Posted: April-27-2013 at 12:27am Bolted...migth need to tap them slighty to break them loose ------------- <a href="">1992 ski nautique Posted By: Alcarlaw Date Posted: April-29-2013 at 5:05am thanks Kapla.

Print Page | Close Window