Boat Wt. for hoist
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=3038
Printed Date: May-15-2024 at 5:02pm
Topic: Boat Wt. for hoist
Posted By: ultrarunner
Subject: Boat Wt. for hoist
Date Posted: February-14-2006 at 5:12pm
Hey folks, I ran across a used Shoremaster 2000 lb capacity hoist. I don't have the specs in front of me for my '80 American Skier, but I looked at the '80 Nautique 18' specs, and it's listed weight is approx. 2100 lbs.
Are these 2000 lb hoists adequate for these boats?
thanks
|
Replies:
Posted By: 79nautique
Date Posted: February-15-2006 at 5:58am
You should be able to replace the cable system to increase the hoist's capacity, give shoremaster a call or look for a website.
On a lot of the shore stations, lifts, hoist the frames are the same and they have different cables and winches to vary the load capacity. Hyd. lifts you change cylinders or pumps I think not very familar with they.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique
|
|