prop
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=3128
Printed Date: May-10-2024 at 1:09pm
Topic: prop
Posted By: lectrician89
Subject: prop
Date Posted: March-03-2006 at 5:16pm
|
I have a 69 mustang with the 289 reverse rotation engine. I just can't seem to get enough RPMs out of it. I believe I have a prop problem. Does anyone have an idea what size RH prop I should be turning? How are they measurede, mine is not marked in any way. Any help would be appeciated. TYhanks
|
Replies:
Posted By: The Lake
Date Posted: March-04-2006 at 11:31am
If you click on the Delta prop link at the top of the home page they have good information about props, sizing, pitch, cup, etc.
-------------
Walk on Water
www.coldwater.me
http://correctcraftfan.com/diaries/details.asp?ID=775&sort=&pagenum=3&yrstart=1966&yrend=1970 - 69 Ski Nautique
|
Posted By: The Lake
Date Posted: March-04-2006 at 11:33am
OK, so the link is not on the home page, but on the forum page.
-------------
Walk on Water
www.coldwater.me
http://correctcraftfan.com/diaries/details.asp?ID=775&sort=&pagenum=3&yrstart=1966&yrend=1970 - 69 Ski Nautique
|
|