1987 Ski Nautique
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=33434
Printed Date: April-28-2024 at 9:52am
Topic: 1987 Ski Nautique
Posted By: JDD33
Subject: 1987 Ski Nautique
Date Posted: April-24-2014 at 10:14pm
|
Ok, this followed me home the other day....... http://s897.photobucket.com/user/Devroude1/media/imagejpg1_zpsbe3350ec.jpg.html" rel="nofollow">  [/IMGIt's actually not bad and is complete as far as I can tell. However this is a classic case of boat abuse.... Story is the first owner had something go wrong with the engine and tore it apart, didn't figure out the problem got. Frustrated and just left it, withe the engine cover up for several years thus trashing the block and other components. http://s897.photobucket.com/user/Devroude1/media/imagejpg9_zpsed2c89c5.jpg.html" rel="nofollow">  Next owner got it as money owed and kind of covered it for the next couple of years. http://s897.photobucket.com/user/Devroude1/media/imagejpg5_zps9c338fc0.jpg.html" rel="nofollow">  So now it's mine and I think the best thing to do is part it out, the floors are spongy and rotten, the stringers sound very hollow, so I'm sure a complete stringer job would be in order. So now it's parts, I'm going to start disassembly this weekend and will post up parts as I can. If you need anything, feel free to PM me and well make a deal. As of right now the things not available are the trailer and the speedos. With 3 Correct Crafts in the back yard, It's starting to look like some of the other famous northeast family's boat yards!  Thanks, John. ------------- Old school goin back to school! |
Replies:
Posted By: Hollywood
Date Posted: April-24-2014 at 11:55pm
|
Oh fun! Horn & anchor light (supposing they work) and that vinyl bag snapped to the hull wall. No rush, we can check them out later this summer. ------------- |
Posted By: JDD33
Date Posted: April-25-2014 at 12:47am
|
I will pull and check the horn and I don't know if the light is there but will look, you want the base as well? That pouch is pretty cool, I looked in my blue '87 and yep there are the three snaps! Guess I will put that on my wish list! ------------- Old school goin back to school! |
Posted By: Hollywood
Date Posted: April-25-2014 at 1:20am
|
Maybe Zach has a blue pouch from the blue 87 SN he is/was parting out. I think Christine's Marine has some pouches available too. Black is seemingly impossible to find, burgandy will work for me. Sure I'll take the socket/ base too. ------------- |
Posted By: IAughtNaut
Date Posted: April-25-2014 at 2:54am
|
if you're parting it out you know we're gonna peer pressure you into turning the hull into a bar, right? ------------- bring the ruckus http://www.correctcraftfan.com/diaries/details.asp?ID=5347" rel="nofollow - 2000 Pro Air |
Posted By: nates78ski
Date Posted: April-25-2014 at 11:07am
|
How much for everything complete? ------------- Nathan http://correctcraftfan.com/diaries/details.asp?ID=1463&sort=&pagenum=3&yrstart=1978&yrend=1978" rel="nofollow - My '78 Ski Nautique <a href="http://photobucket.com/Nates78ski" rel="nofoll |
Posted By: crowell1
Date Posted: April-25-2014 at 4:43pm
|
Looking for a strut 6a6 and possibly a shaft 1x41 ------------- Lonnie |
Posted By: JDD33
Date Posted: April-25-2014 at 10:16pm
|
Lonnie, the strut is stamped S-19 and the shaft is 1 x 54. Thanks, john ------------- Old school goin back to school! |
Posted By: JDD33
Date Posted: April-25-2014 at 10:25pm
|
Nathan, I deliberated and knew that the question might come up...... But felt it would be best sold as parts to help keep other boats on the water. Adam, what do do think gut it, build a grill into the stern, fill the body with ice and beer,(that center drain would work well!), put a sound system under the front deck and replace the windshield with a couple of flat screens, leave it on the trailer and tow it to all the CCF functions!  ------------- Old school goin back to school! |
Posted By: ncdoubleup
Date Posted: April-25-2014 at 11:16pm
| How much for the back seat?? |
Posted By: Orlando76
Date Posted: April-26-2014 at 2:35am
| I know you mentioned speedo's you're keeping, what about pitot's? If pitots go I think I can take them. |
Posted By: JDD33
Date Posted: April-26-2014 at 8:55pm
|
I've been working today at dismantling the boat, I'll look at. The pitots tomorrow and pull them off for you! ------------- Old school goin back to school! |
Posted By: 4woody
Date Posted: April-27-2014 at 3:49am
| Observer seat available |
Posted By: gun-driver
Date Posted: April-27-2014 at 11:39am
|
I'd be interested in the thermostat housing laying on the floor if it's usable. Also the throttle cable bracket and pulleys from the water pump along with all 4 motor/ transmission mounts |
Posted By: Zsnautique
Date Posted: April-27-2014 at 2:09pm
|
I'm interested in the steering box, steering cable, mirror, glove box and a couple other little things! Thanks Zack |
Posted By: 85454Nautique
Date Posted: April-27-2014 at 10:54pm
|
I would be interested in the observer's seat and driver's seat if shipping to Georgia can be arranged. PM me with questions. ------------- 1985 Ski Nautique 454 Project Boat |
Posted By: OverMyHead
Date Posted: April-27-2014 at 11:07pm
|
PM me about the steering wheel. ------------- For thousands of years men have felt the irresistible urge to go to sea, and many of them died. Things got better after they invented boats. 1987 Ski Nautique |
Posted By: Swatkinz
Date Posted: April-27-2014 at 11:09pm
|
Interested in the rotomolded observer seat base if 85454 passes. ------------- Steve 2011 Sport/Air 200 Excalibur 343 2017 Boatmate Tandem Axle Trailer Former CC owner (77, 80, 95, 88, all SNs) Former Malibu owner (07, 09) |
Posted By: astinespring
Date Posted: April-28-2014 at 12:28pm
| How much for the observer seat? I am needing one badly! |
Posted By: TRBenj
Date Posted: April-28-2014 at 12:53pm
|
John, nice pick up! That trailer should work real nice for you. Got your message late on fri, sounds like you may have gotten an answer to your question- but give me a call this week if that's not the case! |
Posted By: JDD33
Date Posted: April-28-2014 at 8:03pm
|
Thanks to everyone who has asked about parts. I've been trying to touch base via pm's and keep everything strait and fair. I've been busy on the tear down and I am almost done, if I haven't touched base with people, it's most likely I'm waiting on a response as well. Thanks again, John ------------- Old school goin back to school! |
Posted By: Donald80SN
Date Posted: April-30-2014 at 11:35pm
|
If NC Double up does not want the back seat. I am interested for a friend that just purchased a 86 with no seat. Tilley166@bellsouth.net If it is sold, can you please measure it for me before you ship it out? My friend will need to get one made. Thanks, Donald |
Posted By: JDD33
Date Posted: April-30-2014 at 11:53pm
|
Up date!! As of now all the interior seating pieces have been sold! Thanks guys! Donald, This is the rear seat http://s897.photobucket.com/user/Devroude1/media/imagejpg6_zps8c22d34c.jpg.html" rel="nofollow">  Which dimensions do you need? John ------------- Old school goin back to school! |
Posted By: newguy1986
Date Posted: May-01-2014 at 1:47am
|
I am looking for the stern light housing piece and the glove box... let me know what I owe! ------------- 1986sn 2001 |
Posted By: newguy1986
Date Posted: May-01-2014 at 1:48am
|
also what shape is the trailer in?? i need at the least some fenders off that thing ------------- 1986sn 2001 |
Posted By: Hollywood
Date Posted: May-01-2014 at 12:17pm
------------- |
JDD33 wrote:Posted By: mark c
Date Posted: May-01-2014 at 8:06pm
| He bought the wreck to get the trailer to put under his 87 SN which is presently sitting on another make of trailer. Won't be able to wrench that from his grasp. |
Posted By: newguy1986
Date Posted: May-01-2014 at 8:39pm
|
Im sorry guys. The was a party foul. please excuse me ------------- 1986sn 2001 |
Posted By: JbrosNauty88
Date Posted: May-05-2014 at 1:11pm
| I would like to buy the strut off the boat if you still have it, Had an accident this past weekend bending mine. |
Posted By: oldcuda
Date Posted: May-05-2014 at 1:45pm
| I need them transmission mounts can't use my merc ones with exhaust I'm running.They would solve my interferance issues. |
Posted By: scootdogydog
Date Posted: May-05-2014 at 2:39pm
|
Donald, I have an 86 sitting in my garage at home. I'll be back there this weekend, so if you need any measurements, I'll be glad to get them for you. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=7183" rel="nofollow - 1999 Python 1980 Ski Tique 1968 Mustang WIP |
Posted By: Orlando76
Date Posted: May-08-2014 at 11:21pm
| That's the same Morse as from the 70's right? |
Posted By: JDD33
Date Posted: May-13-2014 at 11:40pm
|
Lots of pics of parts!!! Here we go..... http://s897.photobucket.com/user/Devroude1/media/imagejpg2_zpse3ee477f.jpg.html" rel="nofollow">  http://s897.photobucket.com/user/Devroude1/media/imagejpg3_zps1a3021e0.jpg.html" rel="nofollow">  http://s897.photobucket.com/user/Devroude1/media/imagejpg4_zps8d7fff64.jpg.html" rel="nofollow">  http://s897.photobucket.com/user/Devroude1/media/imagejpg9_zpsdf80d219.jpg.html" rel="nofollow">  ------------- Old school goin back to school! |
Posted By: JDD33
Date Posted: May-13-2014 at 11:46pm
|
And a few more.... http://s897.photobucket.com/user/Devroude1/media/imagejpg8_zpsd2869072.jpg.html" rel="nofollow">  http://s897.photobucket.com/user/Devroude1/media/imagejpg7_zps2456a870.jpg.html" rel="nofollow">  http://s897.photobucket.com/user/Devroude1/media/imagejpg5_zps2391a06b.jpg.html" rel="nofollow">  http://s897.photobucket.com/user/Devroude1/media/imagejpg6_zps19334088.jpg.html" rel="nofollow">  Thanks!! Let me know if you see anything you need or want. John ------------- Old school goin back to school! |
Posted By: mark c
Date Posted: May-14-2014 at 12:59am
|
I want one of the fins, and the gas fill pipe, cap and key. Is the 4 pieces of interior teak on the side step areas still there and not broken? I saw them in the original pictures of the boat If so I'll take those as well. |
Posted By: Gary S
Date Posted: May-14-2014 at 1:32am
|
I'm interested in the exhaust tips,are they for 3" hose? Could you post a side view pic? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: gR@HaM
Date Posted: May-14-2014 at 4:22am
|
Is that seat base compatible with the frame on my '82 tique? The boat came to me with a rotten block of wood as a base! ------------- '82 Ski Tique |
Posted By: storm34
Date Posted: May-14-2014 at 3:19pm
|
Can you shoot me a PM with a price on the 2 balance tubes and lift rings? ------------- |
Posted By: JDD33
Date Posted: May-14-2014 at 10:13pm
|
Pm's sent.... And a few pics. http://s897.photobucket.com/user/Devroude1/media/imagejpg1_zps78bbc0ae.jpg.html" rel="nofollow">  http://s897.photobucket.com/user/Devroude1/media/imagejpg2_zps301d5279.jpg.html" rel="nofollow">  Thanks, John ------------- Old school goin back to school! |
Posted By: gR@HaM
Date Posted: May-21-2014 at 8:54pm
|
John a couple of questions about that drivers seat base Is it sturdy enough to support the frame as it is - or is it just a cover for the base ie when you removed this was there a wooden block underneath glassed to the floor? Can you let me know the measurements for the bolt holes, A and B in the below photo: http://s258.photobucket.com/user/graham22k/media/seatbase_zps84680673.jpg.html" rel="nofollow">  Im still interested in using this on my '82 tique with the classic style aluminium (proper English!  ) frame, as mounting it flat to the floor seems too upright------------- '82 Ski Tique |
Posted By: mark c
Date Posted: May-21-2014 at 10:47pm
| That is the entire seat support in the 87's, there nothing under it except the floor. It screws to the wood flooring under the fiberglass covering with the 12 perimeter screws. On mine "A" is 9", "B" is 11-1/2". There are two 1 by 4 pieces of wood laminated under the angled face of the base running front to back directly under those holes. The holes are about 3/8" in diameter. |
Posted By: JDD33
Date Posted: May-21-2014 at 11:26pm
|
Yes those are the dimensions I measured as well! Thanks Mark! Here's the back side of the base http://s897.photobucket.com/user/Devroude1/media/imagejpg1_zps5e7915bb.jpg.html" rel="nofollow">  Hope this helps. Does your seat sit above the battery? ------------- Old school goin back to school! |
Posted By: TRBenj
Date Posted: May-21-2014 at 11:55pm
|
Cc only out the battery under the seat in the (narrow) 16' boats... But they stopped doing that in the mid 70's. I was under the impression that '80 was the only year that used the plywood pedestal with the newer style seat frames and tracks. That was definitely the case on the SN, as they went to the fiberglass pedestal in '81. I can't imagine they would have gone to the trouble of making wood versions after they had the ability to make them with glass, so my guess is that even the budget Tique would have had one in '82. Either way, the frames being used by that point are not meant to mount directly to the floor. That pedestal was the same 81-92. |
Posted By: gR@HaM
Date Posted: May-22-2014 at 5:30am
|
Thanks those measurements are good I'll take it if you're happy to ship to the UK? Tim - 'budget Tique' how dare you!!!  ------------- '82 Ski Tique |
Posted By: 93/70 ccpb
Date Posted: May-22-2014 at 9:43pm
|
hello need 1 lifting eye/engine cradle??how much?also how wide is cradle? ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: Nelson
Date Posted: May-26-2014 at 5:58pm
|
Hello, How about the bow light and mirror? And if the 2 vent covers on the bow are the same as the ones on an 86 those to. And possibly the carb if you have it. ------------- 1986 Ski Nautique 2001 |
Posted By: OverMyHead
Date Posted: May-31-2014 at 2:09pm
|
Is the Volt gauge available? ------------- For thousands of years men have felt the irresistible urge to go to sea, and many of them died. Things got better after they invented boats. 1987 Ski Nautique |
Posted By: JDD33
Date Posted: June-03-2014 at 11:36pm
|
Dave, I have a volt gauge, but it's part of a complete set that I would rather not break up. Sorry! More pics and parts coming! ------------- Old school goin back to school! |
Posted By: fosterz
Date Posted: June-06-2014 at 3:28am
| Do u still have the Steering cable |
Posted By: gR@HaM
Date Posted: June-06-2014 at 5:55am
|
John, the seat base has arrived very happy with it - thanks!! ------------- '82 Ski Tique |
Posted By: JDD33
Date Posted: June-07-2014 at 12:25am
|
Graham, I'm sooooo glad it made it to you! My first ever experience shipping over seas! Looking forward to some pics of my parts in your boat! Jeff, sorry but the steering cable in the donor '87 is no good. Thanks, John ------------- Old school goin back to school! |
Posted By: JDD33
Date Posted: June-12-2014 at 9:09pm
|
So here's some pics of some more parts available! http://s897.photobucket.com/user/Devroude1/media/imagejpg1_zps5c19334d.jpg.html" rel="nofollow">  1987 dash pod, complete gauges, 2Air Guides, complete whirring and black box http://s897.photobucket.com/user/Devroude1/media/imagejpg2_zpsfeadb283.jpg.html" rel="nofollow">  Pylon without ring and finger. Removed not cut off! http://s897.photobucket.com/user/Devroude1/media/imagejpg3_zps6c90402c.jpg.html" rel="nofollow">  Complete wiring harnes, from bow to stern. http://s897.photobucket.com/user/Devroude1/media/imagejpg5_zpsb985e201.jpg.html" rel="nofollow">  1"x54" shaft in good condition with or without coupler. http://s897.photobucket.com/user/Devroude1/media/imagejpg4_zps16e66a3f.jpg.html" rel="nofollow">  http://s897.photobucket.com/user/Devroude1/media/imagejpg6_zpsfffe5310.jpg.html" rel="nofollow">  More parts! ------------- Old school goin back to school! |
Posted By: JDD33
Date Posted: June-12-2014 at 9:16pm
|
The brass collection! http://s897.photobucket.com/user/Devroude1/media/imagejpg8_zpsca25a03d.jpg.html" rel="nofollow">  Lots of other parts still available from the other pics... Fuel tank and brackets Engine cradle Trans Prestolite dizzy Bell housing Oil pan Let me know if you need any thing! Thanks, John ------------- Old school goin back to school! |
Posted By: Nelson
Date Posted: June-12-2014 at 9:50pm
|
Hello, How about the bow light and mirror? And if the 2 vent covers on the bow are the same as the ones on an 86 those to. And possibly the carb if you have it. ------------- 1986 Ski Nautique 2001 |
Posted By: soldthefarm3
Date Posted: June-13-2014 at 10:23pm
|
How much do you need to get for the gauges ------------- Pete |
Posted By: river ratt
Date Posted: June-18-2014 at 1:36pm
|
a long shot but the pick ups for airguides and the engine box floor spacers if you have them.. same year and color as mine . what else you got left? ------------- dont slip on the glass |
Posted By: jdlang22
Date Posted: June-18-2014 at 10:11pm
| I wonder if the rudder is compatible with a 75 CC Mustang? |
Posted By: TRBenj
Date Posted: June-19-2014 at 1:04am
|
Posted By: JDD33
Date Posted: June-19-2014 at 1:57am
|
Thanks Tim!!! As it is the pitots were junk and the engine cover blocks were sold with the engine cover and the rudder is sold as well! Thanks for asking! John ------------- Old school goin back to school! |
Posted By: DayTony
Date Posted: June-20-2014 at 1:50am
|
I sent you a PM. I know someone wanted the driver seat, but if it falls through let me know. Also interested in the exhaust hoses if they are at all salvageable. I can come pickup i live nearby. |
Posted By: JoeinNY
Date Posted: June-20-2014 at 11:32am
I am not 100% sure of what you mean by engine box floor spacers, but if it is the little plastic pieces that keep the front of the box in place christines marine is a site sponsor that sells them for a dollar fifty a piece new. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1477 - 1983 Ski Nautique 2001 1967 Mustang 302 "Decoy" http://www.youtube.com/watch?v=cO5MkcBXBBs - Holeshot Video |
Posted By: river ratt
Date Posted: June-21-2014 at 12:47pm
|
thax ------------- dont slip on the glass |
Posted By: chuck kemp
Date Posted: June-29-2014 at 4:55pm
| Trying to restore a 1987 ski nautique. Looking for a drive shaft, strut, rudder and two mufflers. Thanks |
Posted By: JPASS
Date Posted: June-29-2014 at 5:22pm
Try http://www.skidim.com/" rel="nofollow - SkiDim Zach at http://www.n3boatworks.com/default.asp" rel="nofollow - N3 Boatworks or http://www.christinesmarine.com/" rel="nofollow - Christines The first two offer forum member discounts. ------------- '92 Correctcraft Ski Nautique |
Posted By: 8122pbrainard
Date Posted: June-29-2014 at 8:58pm
I would highly recommend the ARE double taper shaft system. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: JDD33
Date Posted: July-01-2014 at 12:55am
|
Chuck, I have most of the parts you are looking for and will PM you tomorrow. JPass and Pete this is a used parts area of the site so why would you direct some one to sites that sell NEW parts that are not budget friendly or "original"? ------------- Old school goin back to school! |
Posted By: Howard86
Date Posted: July-02-2014 at 11:13am
|
Hi there, Do you still have the transmission? If so do you know what model # it is? I have an 86 2001 with the same colors as the one you're parting. Need another Tranny for it. She has been sitting for 3 weeks and it's killing me LOL |
Posted By: 1987don
Date Posted: July-10-2014 at 10:59pm
| is the dash pod solid? any cracks? Mine craked near the windshield where the pod screws into the flat of the dashboard....How much would you want for it? |
Posted By: chase84
Date Posted: August-11-2014 at 2:22am
| You don't still have the prop for sale off that boat do you? |
Posted By: Eagleskier
Date Posted: August-11-2014 at 7:48pm
|
Are the wheel wells (fenders) for the trailer still available? John ------------- Liberty means Responsibility. Thai is why most men dreat it. George Bernard Shaw |
Posted By: JDD33
Date Posted: August-11-2014 at 10:50pm
|
Hi Jordan, sorry the prop is currently not for sale as it is a spare for my running '87 SN. John, the trailer is going to be redone for my current '87 SN, so no parts are available. John ------------- Old school goin back to school! |
Posted By: Orlando76
Date Posted: August-21-2014 at 7:15am
| Has the engine cradle been spoken for yet? |
Posted By: mark c
Date Posted: August-21-2014 at 9:43am
|
John Do you still have the wiring harness? Mine has been so spliced together it may not be worth salvaging? Send me a price when ever you get a chance, I know your off to CT this weekend and I'm not near ready for it so no rush. |
Posted By: JDD33
Date Posted: September-29-2014 at 10:30pm
|
Ok fall is here! Time to move some parts! I still have quite a few parts that need new boats! Strut(s-19), shaft 54"x1" with or without coupler, 2 fins , shaft log, water intake Ski pylon, bell housing, fuel tank MV-1, steering wheel, dash pod with complete gauges and Air guides Fuel tank straps, swim platform brackets, lots of miscellaneous small parts And this... 351 oil pan http://s897.photobucket.com/user/Devroude1/media/imagejpg3_zps55cfb382.jpg.html" rel="nofollow">  Let me know!!! Thanks, john ------------- Old school goin back to school! |
Posted By: velde99
Date Posted: September-30-2014 at 12:54am
| John sent a PM. Thanks |
Posted By: KippCheek
Date Posted: September-30-2014 at 1:10am
| I am interested in the pylon. Let me know what kind of shape it's in. I'm also looking for 89 dash pod and I think the 87 is different is that correct?? |
Posted By: marmon77
Date Posted: October-02-2014 at 12:50am
| I'm interested in the throttle control if it's still available. |
Posted By: al88natuiqe
Date Posted: October-12-2014 at 7:19am
| How much for all interior? |
Posted By: JDD33
Date Posted: October-12-2014 at 1:09pm
|
Al, all of the interior parts have been sold. Thanks, John ------------- Old school goin back to school! |
Posted By: torchred55
Date Posted: October-13-2014 at 7:07pm
|
Hi John, How much for the dash pod? I am in CT and come get it at your convenience. Thanks, Steve |
Posted By: Davidjohnson
Date Posted: November-20-2015 at 4:32pm
|
do you want to sell the trailer? thanks |
Posted By: JDD33
Date Posted: January-04-2016 at 11:12pm
|
Bump ------------- Old school goin back to school! |
Posted By: bwinn
Date Posted: January-06-2016 at 12:33am
Shenanigans! Seriously though, John do u still have the steering wheel and ski pylon? |
Posted By: Davidjohnson
Date Posted: March-06-2016 at 6:32pm
| Do you still have the seats? Tow eye? Thanks |
Posted By: 67nautique312
Date Posted: March-23-2016 at 2:35pm
|
do you still have the gas tank? thanks Paul, ------------- 1963 Classic (handed down to my daughter) 67 Riviera 68 barracuda 1971 Ski Nautique Promo 86 Silver Nautique 1995 Ski Nautique |
Posted By: Hollywood
Date Posted: March-23-2016 at 2:46pm
| If anyone is needing parts that JDD no longer has give me an email. I too am parting out an 87 Ski Nautique but I'd rather John get rid of all his stuff first. |
Posted By: Davidjohnson
Date Posted: March-23-2016 at 3:20pm
| I need the seats - could you send pics? |
Posted By: Hollywood
Date Posted: March-23-2016 at 3:23pm
| I only have driver and observer. They've also been poorly recovered once. I will get pictures. |
Posted By: OverMyHead
Date Posted: March-23-2016 at 3:32pm
|
Glove box? ------------- For thousands of years men have felt the irresistible urge to go to sea, and many of them died. Things got better after they invented boats. 1987 Ski Nautique |
Posted By: Davidjohnson
Date Posted: March-23-2016 at 3:34pm
|
Thanks - I really need the observer base and back rest and all hardware and the little piece that slips in and its base - mine split in half ages ago - and I am having it restored - - Thanks - mine is 86 |
Posted By: Hollywood
Date Posted: March-23-2016 at 3:36pm
|
Yes. email me. Welcome back! http://www.correctcraftfan.com/forum/forum_posts.asp?TID=38289&title=dave-austin" rel="nofollow - someone is looking for in general discussion |
Posted By: jblunceford
Date Posted: May-09-2016 at 3:28pm
|
Do you know if the front (black horizontal) air inlet vents are the same size/fitment as the ones on the 86-88 Martinique Bowrider? If so, I would be interested in one or both if they aren't sun dead-faded. Appreciate your feedback...I'm in central AL. ------------- Jeff in Hoover (Birmingham), AL 1986 CC Martinique Bow Rider 351PCM |
Posted By: JDD33
Date Posted: May-09-2016 at 10:48pm
|
Hi Jeff, Thanks for looking! The good vents went to some guy named Hollywood. The other was cracked and broke so unfortunately I can't help. Actually Hollywood might have some from a part out he has going, give him a shout(PM). John ------------- Old school goin back to school! |
Posted By: Kodyb
Date Posted: June-08-2016 at 5:32pm
| Needing a test platform, one rudder fin, battery cover and possibly other parts for a 87 ski nstique 2001 |
Posted By: Kodyb
Date Posted: June-08-2016 at 5:33pm
| Needing a teak platform, one rudder fin, battery cover and possibly other parts for a 87 ski natique 2001 |
Posted By: Hollywood
Date Posted: June-08-2016 at 5:45pm
|
The vents are available new and I'm sure they're the same as all the other CC models of the time period. I have a few, let me go through them. Also, I have a tracking fin if JDD is out of stock. I also have a platform but it's pretty rough. PM me with email addresses for picture replies. |
Posted By: Peacock
Date Posted: June-13-2016 at 11:16am
|
Any gauges left? How about the fuel level sending unit? I am also looking for the throttle box next to the driver. I'm in NC and will pay freight. |
Posted By: Hollywood
Date Posted: June-13-2016 at 11:44am
|
Gauges? yes Fuel sending unit? yes Morse Control? yes You said "test" platform and then "teak" platform. I have a crappy platform available. It's complete and usable but very weathered. What is a "rudder fin"? Rudder? yes Tracking fin? yes |
Posted By: Kodyb
Date Posted: June-17-2016 at 3:36pm
| Do you still have the dash? |
Posted By: Kodyb
Date Posted: June-17-2016 at 4:00pm
| Do you still have the dash? |