Lift ring brkt.
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=37949
Printed Date: May-20-2024 at 6:30am
Topic: Lift ring brkt.
Posted By: Duane in Indy
Subject: Lift ring brkt.
Date Posted: January-08-2016 at 5:51pm
Thought I'd share some pics of what was encased within my foam in the bow. The lift ring brkt. looked fine above the foam line, BUT look at what was inside. I fabbed a new brkt. with a "tongue" on the bottom to glass into the hull and a cross piece that the floor sits on. If the brkt were to pull loose from the hull then the floor would help hold it in position. Will glass the floor in the weekend. Welded the new brkt to the old one best as poss.   ------------- Keep it as original as YOU want it 1978 Mustang (modified) |
Replies:
Posted By: dwcar
Date Posted: January-08-2016 at 7:54pm
|
Wow! Hard to believe how much of the metal rusted away. I need to take a look at mine! ------------- 83Ski |