Many correct craft parts
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=39224
Printed Date: April-28-2024 at 9:14am
Topic: Many correct craft parts
Posted By: Hollywood
Subject: Many correct craft parts
Date Posted: July-06-2016 at 12:54pm
Observer seat rotomold base. Typical crack between cushions & ripped outer screw holes (not needed anyway).    Observer rotomold corner.   85 Ski Nautique plastic shell driver seat, cracked on bottom 85 Ski Nautique engine/pylon cradles 85 Ski Nautique fuel tank (aluminum) 75 Southwind fuel tank (aluminum) Fiberglass tube mufflers S-19 strut 6A strut 70s/80s tracking fins rudder port Several shaft stuffing boxes 85 Ski complete pylon ring & finger 70-82 flat top motorbox (bare fiberglass) 83-88 Ski nautique motorbox (bare fiberglass) 83-88 Ski nautique gray upholstered motor box Motorbox/seat "hatch" hinges with quick release pins Late 80s battery covers sea strainers Most of a 87-88 Ski/Barefoot split windshield Inquire on anything specific. Email for pictures midwestrebel@gmail.com |
Replies:
Posted By: schmizz
Date Posted: July-07-2016 at 6:11pm
| do you have the seat track for the drivers seat? |
Posted By: 8122pbrainard
Date Posted: July-07-2016 at 7:33pm
|
What about the toilet? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Trader144
Date Posted: July-08-2016 at 9:39am
| Glove box cover? |
Posted By: edwardsjr1
Date Posted: August-19-2016 at 11:40am
| rear bench seat? |
Posted By: Hollywood
Date Posted: August-19-2016 at 11:56am
|
no glove box cover no back seat |
Posted By: gun-driver
Date Posted: August-19-2016 at 12:07pm
Wow Jackie must be cracking the whip 
|
Posted By: Riley
Date Posted: August-19-2016 at 1:08pm
| What about the engine/transmission? |
Posted By: Hollywood
Date Posted: August-19-2016 at 1:28pm
| I haven't even tried to start it but at the moment there is no need for it. I'm pulling it very soon and getting it in the garage to sort it out. |
Posted By: PCarson
Date Posted: November-01-2016 at 7:32pm
|
How about the screws to install the interior teak trim.. We took ours off to refinish and due to health issues didn't get it put back on. Now, several years later we have no idea where the screws are and don't know what to use! Don't know if they are Stainless or Brass, or the style, shape, size, Any insight would be awesome! |
Posted By: Hollywood
Date Posted: November-01-2016 at 7:43pm
| 1" #8 stainless oval head Phillips |
Posted By: proc
Date Posted: December-05-2016 at 3:45pm
| i know its an old post but do you still have drivers seat base available? |
Posted By: Hollywood
Date Posted: December-05-2016 at 6:37pm
| Yes. |
Posted By: trice
Date Posted: December-05-2016 at 11:09pm
| If proc doesn't buy I will, will check back tomorrow. |
Posted By: trice
Date Posted: December-06-2016 at 10:15pm
|
Hey Hollywood, just checking back with you on the seat base. I'm putting a 87SN back together and my base requires major repair so yours would be a great replacement. Please email me or send me a PM when you hear back from proc. Do you by chance have a glove box top? Thanks. ------------- 87 SN |
Posted By: trice
Date Posted: December-06-2016 at 10:26pm
|
I see the answer on the glove box lid. ------------- 87 SN |
Posted By: proc
Date Posted: December-07-2016 at 5:17pm
| ill take it let me know how you want payment thanks |
Posted By: proc
Date Posted: December-08-2016 at 7:02pm
| thanks again for the seat base! also looking for tachometer with a white face for my 91 sport nautique. if you have one or know someone please let me know thanks |
Posted By: Mlsurrette
Date Posted: December-30-2016 at 6:32pm
| I would be interested in the observation rotomold bade if you still have it... email mlsurrette @ yahoo.com... |
Posted By: Hollywood
Date Posted: February-17-2017 at 3:10pm
| I updated the top post, lots of not popular stuff not posted (ask) |
Posted By: Orlando76
Date Posted: February-18-2017 at 8:33am
|
The 70's motor box, is it gel coated or was it upholstered? ------------- Please support The Cystic Fibrosis Foundation 1976 Ski Nautique 351 Escort 1993 Ski Nautique purple and black 351 HO PCM |
Posted By: Hollywood
Date Posted: February-18-2017 at 3:22pm
| No gel, it was upholstered. |
Posted By: the grinch
Date Posted: February-19-2017 at 5:25pm
|
80 fuel tank fit a 78 Ski? ------------- It takes a big hole to bury an elephant. Kirk Miller [URL=http://www.correctcraftfan.com/forum/register.asp?FID=7]KIRKS79/URL] |
Posted By: Hollywood
Date Posted: February-19-2017 at 7:15pm
| I would think so, not much changed. It is dimensionally the same as a 72 ski nautique tank. |
Posted By: the grinch
Date Posted: February-19-2017 at 9:21pm
|
Are you coming to the White Lake reunion and able to bring it with you? ------------- It takes a big hole to bury an elephant. Kirk Miller [URL=http://www.correctcraftfan.com/forum/register.asp?FID=7]KIRKS79/URL] |
Posted By: Hollywood
Date Posted: February-20-2017 at 1:33am
| I am not but maybe someone around here is. |
Posted By: lakedog55
Date Posted: March-07-2017 at 12:14pm
|
Do you happen to have any of the older aluminum brackets? and if not how much for the roto cast passenger base? ------------- Lakedog55 |
Posted By: Hollywood
Date Posted: July-31-2017 at 5:45pm
|
Updated list. Please inquire pricing via PM or email. |
Posted By: Hollywood
Date Posted: September-05-2017 at 8:45pm
| People looking for parts lately that are listed here |
Posted By: throttle out
Date Posted: September-12-2017 at 5:33pm
|
Does the windshield have vents on the sides or are they solid glass?? Thanks ------------- 1989 Ski Nautique 2001 351 PCM w/ 1-1.23 |
Posted By: Hollywood
Date Posted: September-12-2017 at 7:24pm
| No vents |