Print Page | Close Window

Parting out 1995 Nautique GT-40

Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=40134
Printed Date: April-27-2024 at 10:20am


Topic: Parting out 1995 Nautique GT-40
Posted By: JW
Subject: Parting out 1995 Nautique GT-40
Date Posted: October-30-2016 at 8:41pm
I am parting out a 1995 Nautique with GT-40. As of now the boat is complete. The boat came from the NC coast and the motor rusty,it does turn over. Call or text with questions and to see what is available and price. 7656615494



Replies:
Posted By: JW
Date Posted: October-30-2016 at 10:11pm
Here are a couple more photos.
Joe


Posted By: JW
Date Posted: January-11-2017 at 5:10pm
Dash pod and one fin has been sold.


Posted By: Fl Inboards
Date Posted: January-11-2017 at 7:27pm
What's wrong with the hull? and why part it out?

-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.




1993 Shamrock "fat" 20. 2008 Nautique 196 5.0


Posted By: JW
Date Posted: January-11-2017 at 8:09pm
The hull is fine. To many projects. I will sell what is left for 2,500 less trailer.


Posted By: aupatking
Date Posted: January-24-2017 at 2:33am
I really need the flame arrestor and the throttle pad (the vinyl interior piece). Would you sell those? If you're willing to pull gauges, I need the tach, hour meter, and fuel gauge as well.

-------------
02 SN 196 TSC2 ZO
01 SN 196 TSC1
98 SN 196 TSC1
97 SN 196 TSC1
93 SN 196 NWZ


Posted By: 1st Nautique
Date Posted: February-12-2017 at 4:47pm
I see where you quoted a price for the boat without the trailer. Are you planning to sell the trailer?


Posted By: JW
Date Posted: February-12-2017 at 9:47pm
Trailer is not for sale at this time. It is just a roller trailer not a true inboard trailer.
JW


Posted By: Ben#155
Date Posted: February-15-2017 at 4:16am
send pm about an exhaust elbow


Posted By: Mike9812121298
Date Posted: March-25-2017 at 3:12am
Have the driveshaft strut and driveshaft?


Posted By: Scottie m
Date Posted: March-25-2017 at 8:40am
What a shame


Posted By: flyweed
Date Posted: March-25-2017 at 12:41pm
is the prop a CW or CCW rotatation?   my boat uses a RH (CW) rotation prop...and I could use a spare. Send me PM


-------------
'93 Ski Nautique NWZ, Air Boom Tower
Drink Tonight..for tomorrow We Ride!


Posted By: tryathlete
Date Posted: March-25-2017 at 2:02pm
Seems to me like the other thread with the wrecked 97 SN and this thread should be merged to build one good Frankenboat.


Posted By: CuddyNautiqueman
Date Posted: April-15-2017 at 1:45am
I'd like to know if you still have the electronics on the motor, do you know if there still good or the complete motor, how much for it all. Thanks


Posted By: Airsergio
Date Posted: April-26-2017 at 6:06pm
Do you have the ecm?? If so how much?Thanks


Posted By: JB1995Ski
Date Posted: April-27-2017 at 1:47pm
Are the circuit breaker switches available?


Posted By: Blamey
Date Posted: April-27-2017 at 2:02pm
Did the gauges go with the dash pod?

I'm interested in the Speedo's.

-------------
96 Super Sport
Previously: 95 Sport Nautique, 1980 Ski Supreme


Posted By: JW
Date Posted: April-27-2017 at 4:59pm
All gauges and switches went with dash pod


Posted By: JW
Date Posted: May-12-2017 at 11:09am
Windshield, swim platform, drivers seat, pylon, two fins, dash pod and gauges, glove box and cooler lids and a few hardware pieces have been sold. All under gear is still for sale. ECM is probably no good, tried on another boat and would not start.


Posted By: flyweed
Date Posted: May-12-2017 at 12:23pm
PM sent

-------------
'93 Ski Nautique NWZ, Air Boom Tower
Drink Tonight..for tomorrow We Ride!


Posted By: gun-driver
Date Posted: May-12-2017 at 1:22pm
Originally posted by flyweed flyweed wrote:

is the prop a CW or CCW rotatation?   my boat uses a RH (CW) rotation prop...and I could use a spare. Send me PM

GT -40's are lefty but run the 1:23-1 tranny and righty prop.


Posted By: Mike9812121298
Date Posted: June-02-2017 at 6:06pm
looking for the steering wheel center cap and a couple other things. what do you have left


Posted By: nautnuts
Date Posted: June-02-2017 at 10:05pm
I'm interested in the strut


Posted By: JW
Date Posted: June-02-2017 at 11:36pm
PM sent to Mike9 and Nautnuts


Posted By: winniskier
Date Posted: June-03-2017 at 7:28am
I need an intact observer seat bottom/board for my 1997 Ski Nautique. My board is snapped and patched (poorly) due to kids jumping from dock into the boat. I am not sure if the one from the 1995 or 1997 would work.

-------------
Jim


Posted By: AlfaDon
Date Posted: June-06-2017 at 4:04pm
I'm interested in the bracket that the ECU is mounted to. Did this motor have a fuel control Cell?

Thanks,

Don


Posted By: JW
Date Posted: June-06-2017 at 8:23pm
I don't think it has a FCC, I'll check tomorrow.
Joe


Posted By: JW
Date Posted: June-06-2017 at 8:25pm
Windshield, swim platform, drivers seat, pylon, two fins, dash pod and gauges, glove box and cooler lids, prop, strut, motor box/cover and a few hardware pieces have been sold.


Posted By: 92-sNoB
Date Posted: June-23-2017 at 12:15am
Is there enough stuff left to switch my carb over to your fuel injection?


Posted By: JW
Date Posted: July-20-2017 at 10:10am
Windshield, swim platform, drivers seat, pylon, two fins, dash pod and gauges, glove box and cooler lids, prop, strut, motor box/cover, all fuel injection , wiring and intakes, rudder, (motor and transmission pending) and a few hardware pieces have been sold. If anyone needs a replacement hull this one is in vey good condition. Bare hull $750.00


Posted By: 92-sNoB
Date Posted: July-20-2017 at 11:00am
Would most of all my stuff off of my 92 ski work on this hull?


Posted By: JW
Date Posted: July-20-2017 at 12:40pm
I believe there are some differences but you would need to ask someone more knowledgeable than me.
Joe


Posted By: aupatking
Date Posted: July-20-2017 at 3:27pm
Only very minor changes 92-95, aside from some bottom contours and no more wood. I don't remember any of them that would effect a basic bolt on swap. I'd like to see it.

-------------
02 SN 196 TSC2 ZO
01 SN 196 TSC1
98 SN 196 TSC1
97 SN 196 TSC1
93 SN 196 NWZ


Posted By: JW
Date Posted: July-25-2017 at 1:42pm
Motor and transmission are sold. Current photos of hull.


Posted By: Rob-Man
Date Posted: July-27-2017 at 6:56pm
Do you still have the back seat for sale?


Posted By: JW
Date Posted: July-27-2017 at 8:30pm
Complete back seat is for sale, needs covered.


Posted By: Rob-Man
Date Posted: July-28-2017 at 11:09am
How much do you want for it? I need measurements to please- I have a 86 2001, I am going to try to make it fit.


Posted By: velde99
Date Posted: July-28-2017 at 11:25am
You said trailer is not for sale? Just thinking about how I'd transport the hull.


Posted By: JW
Date Posted: July-28-2017 at 3:25pm
Rear seat is approx. 68" wide X approx. 28" deep X approx. 15" high
550.00


Posted By: Larryboy
Date Posted: July-28-2017 at 6:27pm
Any thoughts on selling trailer at this point? I am in desperate need of a trailer for my 1998 196 Open Bow. It seems to fit pretty well on that trailer.

Thanks,

Larry


Posted By: velde99
Date Posted: July-28-2017 at 6:35pm
Larry- you buy trailer- and I'll take the hull after you drive it here. =)


Posted By: JW
Date Posted: July-28-2017 at 7:20pm
Trailer 1,600.00 it has 1500 miles on it, was a new left over when I bought the Nautique 3 or 4 years ago.


Posted By: Larryboy
Date Posted: July-29-2017 at 11:01am
Where are you located?. I'll probably buy if you are within a few hundred miles.

Can you call me at 407-446-5340


Posted By: 8122pbrainard
Date Posted: July-29-2017 at 11:14am
Originally posted by Larryboy Larryboy wrote:

Where are you located?.


Real Name:
Joe Preusz
Gender:
Male
Date of Birth:
25-March-1953
Age:
64
Location:
Marion,IN
Homepage:
Not Given
Occupation:
self
Interests:
Not Given

-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<


Posted By: JW
Date Posted: August-23-2017 at 9:05am
Thought I would list items that are left. Hull , shaft , observer seat , rear seat, one fin, fuel tank, muffler, rear floor section, hull side platform brackets.
Joe


Posted By: JW
Date Posted: October-16-2017 at 10:56am
Will sell bare hull for 675.00
Joe


Posted By: JW
Date Posted: November-22-2017 at 10:18pm
Bare hull 575.00


Posted By: JoseCas
Date Posted: December-24-2017 at 2:00pm
Hi JW, is rear seat still available?
Thanks


Posted By: JW
Date Posted: December-24-2017 at 3:26pm
Yes
500.00


Posted By: JW
Date Posted: April-20-2018 at 10:31am
Still for sale, needs to go need trailer. Hull 500.00, rear seat 500.00. What is left , Hull , shaft , observer seat , rear seat, fuel tank, muffler, rear floor section, hull side platform brackets. May trade for ?
Joe


Posted By: JW
Date Posted: May-13-2018 at 4:16pm
Hull $400.00


Posted By: Jass
Date Posted: May-30-2018 at 1:56am
Do you still have the speedo pickups for the back transom of the boat? Interested.


Posted By: JW
Date Posted: May-30-2018 at 10:03am
They have been sold
Joe


Posted By: tommer12
Date Posted: May-30-2018 at 1:05pm
Trailer still available?

-------------
84 SN, 92 SNOB, 2005 SANTE 2006 SN 206


Posted By: JW
Date Posted: May-30-2018 at 6:22pm
Trailer is not for sale.


Posted By: JW
Date Posted: May-23-2019 at 9:37pm
Hull $250


Posted By: GHTILL
Date Posted: May-24-2019 at 6:36pm
Love to have the rear seat back frame only? Long way away from me here in Texas though.

-------------
TWSS


Posted By: Ferflorida
Date Posted: May-25-2019 at 1:15pm
Hi,Driver seat, front seat and side panels still available?


Posted By: brantb
Date Posted: May-28-2019 at 12:44pm
Do you have a fin left? Also, do you have the gas shocks for the observers seat and the glove box? If so can i get some pics.


Posted By: JW
Date Posted: May-28-2019 at 3:03pm
What is left , Hull , shaft , observer seat , rear seat, fuel tank, muffler, rear floor section, hull side platform brackets. May trade for ?
No fins, seat shocks or glove box. Still have side bolsters.


Posted By: flyweed
Date Posted: May-28-2019 at 3:15pm
I'd go $300 for observer seat. PM me if interested.


-------------
'93 Ski Nautique NWZ, Air Boom Tower
Drink Tonight..for tomorrow We Ride!



Print Page | Close Window