351 PCM dipstick R-041033A
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=40422
Printed Date: May-06-2024 at 4:40pm
Topic: 351 PCM dipstick R-041033A
Posted By: velde99
Subject: 351 PCM dipstick R-041033A
Date Posted: January-17-2017 at 12:58pm
 looking for this dipstick- with this number on it. Must be this one- others do not measure properly. From a 1991. Mine is pitted and can not read the oil level properly. |
Replies:
Posted By: velde99
Date Posted: January-31-2017 at 12:03am
| Bump. |
Posted By: Duane in Indy
Date Posted: January-31-2017 at 6:26am
|
Get another stick, preferably longer and cut it off near the top. Then Tig them together. As long as it registers "Full" at the right height then you are OK. Done it for many hotrods in the past. Attaching them at the highest point allows it to slide down the tube better. ------------- Keep it as original as YOU want it 1978 Mustang (modified) |
Posted By: velde99
Date Posted: January-31-2017 at 8:35am
| Thanks for the advice- gonna just wait for the correct one. 😀 Someone has to have a 1989 and up 351 that went bad. |
Posted By: velde99
Date Posted: February-08-2017 at 12:21pm
| Bump |
Posted By: Fl Inboards
Date Posted: February-08-2017 at 1:31pm
|
Found three more dipsticks cleaning out behind a shelf none fitting the part # though. Thought I had something for ya!! ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: velde99
Date Posted: February-08-2017 at 8:44pm
| 😕. Keep looking!! 😜 Thank you again! |
Posted By: velde99
Date Posted: March-16-2017 at 12:45am
| Bump |
Posted By: velde99
Date Posted: April-18-2017 at 2:08am
| Bump |