Parts! Parts! Parts!
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=40718
Printed Date: April-25-2024 at 7:03am
Topic: Parts! Parts! Parts!
Posted By: JDD33
Subject: Parts! Parts! Parts!
Date Posted: March-20-2017 at 11:31pm
I have a bunch of parts available from a 87 Ski Nautique, an 84 Southwind, and a 65 Mustang. Let me know if you need info or better pics! Thanks!                    ------------- Old school goin back to school! |
Replies:
Posted By: Frankenotter
Date Posted: March-21-2017 at 12:16am
|
Might be interested in the 11a rudder and one tracking fin. ------------- 1999 Ski Nautique 196 |
Posted By: Orlando76
Date Posted: March-21-2017 at 12:42am
|
That sure is some pretty white sand. ------------- Please support The Cystic Fibrosis Foundation 1976 Ski Nautique 351 Escort 1993 Ski Nautique purple and black 351 HO PCM |
Posted By: Mojo
Date Posted: March-21-2017 at 4:44pm
|
PM Sent ------------- 05' SV211 TE 73' Martinique had:96' SNOB had:76' Nautique had 77 Tique |
Posted By: SN2001_1984
Date Posted: March-21-2017 at 8:27pm
|
pm sent on 84 throttle ------------- 1984 Ski Nautique 2001 :: 351 Original factory ordered color combo from Silver Spray Sports: Fenton MI |
Posted By: n7narcosis
Date Posted: March-21-2017 at 8:46pm
|
PM sent! Curious if that swim deck/brackets will work for my 89 Martinique... ------------- 1989 Correct Craft Martinique CB --- 351W |
Posted By: Mike9812121298
Date Posted: March-25-2017 at 2:43am
| Do u know if the drive shaft and strut r the same for a 94'? |
Posted By: clint351mx
Date Posted: April-10-2017 at 9:10pm
|
I need that 11a rudder is it still available? |
Posted By: JReisch09
Date Posted: April-10-2017 at 9:43pm
|
Are the brackets for the platform still available? I am missing mine on 1987 Fish and I think they are the same. ------------- Jon R 1987 Fish Nautique |
Posted By: swilliams
Date Posted: April-11-2017 at 1:57pm
|
Curious to know if that glove box( the one with the red trim) will fit a 76' Martinique. Mine was missing when I recently purchased the boat. What you have pictured looks correct. I can see up under my dash where it mounts and looks like a similar anchoring point. Thanks, Steve ------------- 1976 Martinique,350 Omc. 1975 Glastron/Carlson CV16,115 Merc. |
Posted By: JDD33
Date Posted: April-11-2017 at 10:29pm
|
PM's have been flying out on the parts, thank you all for your interest! ------------- Old school goin back to school! |
Posted By: boatdreams
Date Posted: April-20-2017 at 3:05pm
|
I need some parts for a 67 Wildcat, rear lifting ring and a script correct craft side emblem How do those rear lifting rings mount? ------------- Just finished with another dream........... |
Posted By: stoxen14
Date Posted: May-08-2017 at 11:30am
|
Was wondering if you have any parts left? looking for a AF-2500 strut 1"x50" IO shaft and the Tee type throttle? Thanks |
Posted By: JDD33
Date Posted: May-08-2017 at 9:59pm
|
I do still have the 1"" x 50" drive shaft . Not sure on the Tee type throttle??? Not sure on the strut. Which boat is it for? ------------- Old school goin back to school! |
Posted By: 8122pbrainard
Date Posted: May-08-2017 at 10:24pm
Jeffrey, If you ever get over to the HD, ask for me. (Pete) I may be on duty in the lumber dept. It would be great to meet you and talk some on CC's. I think I know what you mean regarding the tee type throttle but fill me in on exactly what you are looking for. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
stoxen14 wrote:Posted By: stoxen14
Date Posted: May-09-2017 at 3:58pm
|
I think I'm going with a new prop shaft if I'm in a full restore on a 73 SN. The throttle on the left in your picture. Has a tee type handle. |
Posted By: stoxen14
Date Posted: May-09-2017 at 4:06pm
|
Hello Pete, My throttle assembly is falling apart and looking for parts. I'm in a full restore. John D did the gelcoat and graphics. I'm sure you know him he's in 3lakes.  
|
Posted By: 8122pbrainard
Date Posted: May-09-2017 at 4:32pm
|
Jeffrey, You didn't go wrong having JD do the gel. He's slow  but the best gel guy I know!It's looking great. Keep the pictures coming. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: JDD33
Date Posted: May-10-2017 at 12:10am
|
That's a cool looking Ski Nautique! Unfortunately I have already sold the Telefex controller. Awesome job bringing that boat up to concourse status! ------------- Old school goin back to school! |
Posted By: stoxen14
Date Posted: May-10-2017 at 3:41pm
|
Scott, YA JD is the best out there in our area maybe state. I'll put more pictures up as I get it closer to being done. |
Posted By: nautnuts
Date Posted: May-31-2017 at 11:15pm
| hello, i'm looking for a drive shaft, and a strrutd for a 83 nautique and a wiring harness for a 68 mustang. have anything? |
Posted By: JDD33
Date Posted: June-01-2017 at 12:07am
|
I do have a drive shaft, but the strut was sold. Let me look to see if I have a wiring harness. Thanks, John. ------------- Old school goin back to school! |
Posted By: Hollywood
Date Posted: June-01-2017 at 3:53am
| Think I got a strut, lemme check. |
Posted By: nautnuts
Date Posted: June-02-2017 at 10:01pm
| please text me. 207-653-8165 |
Posted By: ab7gerry
Date Posted: August-01-2017 at 6:27pm
| Looking for rudder for 86 SN2001 ?? |
Posted By: 8122pbrainard
Date Posted: August-01-2017 at 6:48pm
Gerry, Is your rudder missing or just bent? If bent, have you considered straightening? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: JDD33
Date Posted: August-07-2017 at 9:50pm
|
Thanks for asking, however the rudder I had has been sold. ------------- Old school goin back to school! |
Posted By: mfinch
Date Posted: August-11-2017 at 11:02pm
| Is the prop still available? |
Posted By: wsavini
Date Posted: August-12-2017 at 11:05am
| Do you have any interior parts for the 65 Mustang? The front seats or brackets for front seats, etc. ty |
Posted By: JDD33
Date Posted: August-12-2017 at 11:35pm
|
Hi guys! The prop is no longer available. The 65 Mustang didn't have any interior when I got it so unfortunately none is available. Thanks, John ------------- Old school goin back to school! |
Posted By: jbear
Date Posted: August-13-2017 at 11:13pm
my thoughts as well.... john ------------- "Loud pipes save lives" AdamT sez "I'm Canadian and a beaver lover myself"... |