teak step pad
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=4080
Printed Date: May-11-2024 at 4:35am
Topic: teak step pad
Posted By: shum8
Subject: teak step pad
Date Posted: July-05-2006 at 11:48pm
|
One of my step pads (aluminum with teak strips) is missing one of the teak strips. I am looking for the strip or the whole new pad. Either would be fine.
|
Replies:
Posted By: nates78ski
Date Posted: July-06-2006 at 12:12am
You might be better off buying a small piece of Teak & maybe fitting a new piece yourself,I'm not sure how easy one of those little pieces of teak or just one pad would be to find. I did this last year with the end plank on my swim platform, for the first few months it looked like a new piece, but now it nearly matches perfectly after the second time cleaning, brightening & Oiling...
-------------
Nathan
http://correctcraftfan.com/diaries/details.asp?ID=1463&sort=&pagenum=3&yrstart=1978&yrend=1978" rel="nofollow - My '78 Ski Nautique
<a href="http://photobucket.com/Nates78ski" rel="nofoll
|
Posted By: shum8
Date Posted: July-06-2006 at 3:01am
Posted By: DrCC
Date Posted: July-06-2006 at 10:43am
|
Shum8, I have some Teak scraps. How long is the piece you need?
|
Posted By: shum8
Date Posted: July-06-2006 at 10:12pm
|
I am going to say maybe 1/2 to 3/4 wide and 10 inches long. Let me know how much $$ and I will send it to you. And I would say I would need a piece that is with the grain. Thanks
|
Posted By: 79nautique
Date Posted: July-07-2006 at 7:19am
you can buy new ones at west marine.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique
|
Posted By: DrCC
Date Posted: July-09-2006 at 12:11pm
shum8, One dollar. Ups would be around
12.00 I might be able to send it thru the post office alot cheaper. I just looked at a piece from westmarine, they run around 15.00
As of 2 weeks ago, Teak is $21.86 per board foot.
Yes, the grain runs with the length
|
|