Wildcat parts
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=40895
Printed Date: March-28-2024 at 5:18pm
Topic: Wildcat parts
Posted By: boatdreams
Subject: Wildcat parts
Date Posted: April-20-2017 at 4:13pm
1967 Wildcat
I need a rear lifting ring and instruction on how it is mounted.
I'm also in need of 1 side script emblem, used or new
I also think the rudder is bent, is there a certain model # to look for?
I'd like a rear platform or ladder is someone has one out there, the boat has never had either.
------------- Just finished with another dream...........
|
Replies:
Posted By: 8122pbrainard
Date Posted: April-20-2017 at 10:31pm
Gary, How about some pictures of the 67 project? They would give us a better idea of what you have to work with. The typical mounting of aft lifting rings of that era is a steel angle fastened to wood that's glassed into the transom.. Rudders can be straightened in an arbor press. If you don't have one, a machine shop would be a good place to start. Look at the brochures and diary pictures for examples of aft ladders. IMHO, a platform isn't appropriate for a 67. .
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
Posted By: boatdreams
Date Posted: April-21-2017 at 1:19am
Apparently I need a lesson on how to load a photo from my phone....
------------- Just finished with another dream...........
|
Posted By: boatdreams
Date Posted: April-21-2017 at 7:13pm
I figured it out.
------------- Just finished with another dream...........
|
Posted By: fanofccfan
Date Posted: April-21-2017 at 9:24pm
That color though! I love it! Looks like a very nice boat.
|
|