Did something stupid! Need raw water pump housing
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=40973
Printed Date: April-28-2024 at 5:40pm
Topic: Did something stupid! Need raw water pump housing
Posted By: Brktracer
Subject: Did something stupid! Need raw water pump housing
Date Posted: April-29-2017 at 1:17pm
I did something stupid with the press and messed up my housing a little when replacing bearings and the mechanical seal.  I can ride this weekend but I'd like to fix it right rather than worry about breaking down in the future. This is a big lake, lol! If you have an old pump or housing lying around that you don't need, please let me know. I'm happy to buy it. I'd rather not pay $400 for a new one. It's a Sherwood G21. I just need a rebuildable core. Thanks! Matt ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=3180 - 1976 Nautique |
Replies:
Posted By: lharley
Date Posted: April-29-2017 at 1:22pm
|
Matt, I have my old Sherwood G21 housing in my shop. I am going over this afternoon and will get it. I will send you a pic to see if you want it. |
Posted By: Brktracer
Date Posted: April-29-2017 at 11:03pm
|
That sounds great! Thanks! We were able to ride today and it worked fine. I just don't like having to worry about it. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=3180 - 1976 Nautique |
Posted By: lharley
Date Posted: April-29-2017 at 11:26pm
| I cant find it. I will have to wait till my 14 year old gets home. He knows where I put everything. I will keep you posted. |
Posted By: storm34
Date Posted: April-30-2017 at 12:28pm
|
I have one in a box somewhere. Let me look tomorrow when I get over to the shop. ------------- |
Posted By: Duane in Indy
Date Posted: April-30-2017 at 12:43pm
Chances are good that your old one is fixable. What extent is the damage?? Can't be as bad as mine was if you are still using it. Don't pitch it.  ------------- Keep it as original as YOU want it 1978 Mustang (modified) |
Posted By: Brktracer
Date Posted: May-01-2017 at 11:39am
|
That machined housing is a work of art! Great job! I have a small lathe 12X36 and a bench top mill. To make that on manual machines probably isn't a good use of my time. I'd rather be riding! I did consider it as an option though. I assume it is aluminum? Would be much easier to machine. Matt |
Posted By: Brktracer
Date Posted: May-01-2017 at 11:42am
|
Thanks again Iharley and storm34. Let me know if you come up with anything. Matt |
Posted By: lharley
Date Posted: May-02-2017 at 11:58am
|
Matt, I have been over my shop twice looking for that housing and can't find it anywhere. I would have bet anything I would have kept it after I replaced it but my 14 yo assured me I threw it out. Sorry.If I run across it I will let you know. Good luck ! |
Posted By: Blamey
Date Posted: May-02-2017 at 2:46pm
|
I have one. Not sure of the condition but I am happy to ship it to you if you pay for shipping. ------------- 96 Super Sport Previously: 95 Sport Nautique, 1980 Ski Supreme |
Posted By: Brktracer
Date Posted: May-03-2017 at 1:13am
Thanks so much for looking! ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=3180 - 1976 Nautique |
lharley wrote:Posted By: Brktracer
Date Posted: May-03-2017 at 1:15am
That sounds great! ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=3180 - 1976 Nautique |