PARTS SOURCE NEEDED
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=41290
Printed Date: April-29-2024 at 9:02am
Topic: PARTS SOURCE NEEDED
Posted By: Lakeview
Subject: PARTS SOURCE NEEDED
Date Posted: June-17-2017 at 5:22pm
|
Bell housing to transmission double ended studs 3 3/4 " overall length x 14 thread both ends-my local NAPA store tried Dorman and ARP with no luck ------------- Lakeview 1992 Barefoot Nautique 1967 Barracuda SS 1967 Chris Craft Cavalier |
Replies:
Posted By: KENO
Date Posted: June-17-2017 at 7:56pm
| I seem to remember getting some at ebasicpower but it took a phone call to find them. |
Posted By: KENO
Date Posted: June-17-2017 at 11:16pm
| Here's the PCM part number for the transmission studs R031005 |
Posted By: DayTony
Date Posted: June-18-2017 at 12:32am
|
Mcmastercarr. ------------- 1988 Barefoot nautique-454 |
Posted By: 8122pbrainard
Date Posted: June-18-2017 at 1:34am
+1 ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
DayTony wrote:Posted By: Lakeview
Date Posted: June-18-2017 at 10:39am
|
McMaster Carr only goes to 2 1/2 " length according to their online chart-Thanks Ken for the PCM # will call Ski dim tomorrow. ------------- Lakeview 1992 Barefoot Nautique 1967 Barracuda SS 1967 Chris Craft Cavalier |
Posted By: Lakeview
Date Posted: June-19-2017 at 2:22pm
|
Thanks Ken-Part # still good-once again SKIDIM comes thru- How is your Quick Fuel Carb performing?? ------------- Lakeview 1992 Barefoot Nautique 1967 Barracuda SS 1967 Chris Craft Cavalier |
Posted By: KENO
Date Posted: June-19-2017 at 2:37pm
|
Glad they had them, I seem to remember being surprised by the price being pretty reasonable too. At least it was a few years back. I have a Quick Fuel sitting on the shelf that was used, needed rebuilding and it ran real well afterwards. It'll replace a Holley at some point but the Holley is working just as well right now. |