Water bonnet frame member
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=41656
Printed Date: May-03-2024 at 1:38am
Topic: Water bonnet frame member
Posted By: swilliams
Subject: Water bonnet frame member
Date Posted: August-01-2017 at 6:40pm
I am looking for the front windshield, port side outer glass frame member. It is on a 76' Martinique with the upper solid glass and the lower vent panels. This piece accepts the side triangular shaped assembly and also accepts the glass rubber channels for the front glass. PO must have damaged the upper corner. I would prefer the "mill" finish but would take a black one.Whew! I can't believe I did that all in one breath. I'd post a pic but every time I want to upload, it turns on my iPad camera. Thanks, Steve
-------------
1976 Martinique,350 Omc. 1975 Glastron/Carlson CV16,115 Merc.
|
Replies:
Posted By: ScottZ
Date Posted: August-04-2017 at 5:40pm
The same thing happened to me when I tried that as well. I might have noe off of a South Wind that you could tweet it to work for you. I will check.
-------------
Scott Zuelzke
Lake Mitchell , AL
1984 Ski Nautique
1972 Skier
|
Posted By: swilliams
Date Posted: August-05-2017 at 6:38am
Thanks Scott
-------------
1976 Martinique,350 Omc. 1975 Glastron/Carlson CV16,115 Merc.
|
|