87 lower dash panel without cutout
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=41923
Printed Date: May-02-2024 at 6:21am
Topic: 87 lower dash panel without cutout
Posted By: outerbanked
Subject: 87 lower dash panel without cutout
Date Posted: September-14-2017 at 2:14pm
|
I'm looking for the dash panel that the ignition, breakers, and in some cases the radio mounts to. I can get this: https://www.nautiqueparts.com/product/lower-section-of-pod-with-radio-cutout-1987/ Which I should be really excited about. I would like one without the radio cutout, as someone has already cut my lower dash to install a radio on the lower starboard side. Where the warning stickers were. Thanks. |
Replies:
Posted By: outerbanked
Date Posted: September-29-2017 at 1:45pm
|
Is there a way to delete posts? Nautiqueparts is making another batch of these panels. Although I could not find it on thier site, they do sell the same plate without the radio precut. |
Posted By: TRBenj
Date Posted: September-29-2017 at 2:03pm
|
I would like to see it... many of the reproduction dash plates don't look much like the originals. The one you posted with the radio cut outs looks to be NOS. The reproduction they show without cutouts looks very different. https://www.nautiqueparts.com/product/lower-dash-panel-1988-1989-nautiques-s9403-custom/ I would be interested in a non-cutout panel that looks exactly as the original did. Let us know what you find. |
Posted By: 8122pbrainard
Date Posted: September-29-2017 at 2:22pm
https://www.nautiqueparts.com/product/lower-dash-panel-1988-1989-nautiques-s9403-custom/" rel="nofollow - Direct link ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
TRBenj wrote:Posted By: TRBenj
Date Posted: October-28-2017 at 8:29pm
| Any update on this? Would love to see what the 87 reproduction panels look like. |
Posted By: outerbanked
Date Posted: October-29-2017 at 9:24pm
| I forgot I ordered it. I'll email. |
Posted By: TRBenj
Date Posted: May-09-2019 at 12:59am
| Just checking in again on this. Did you ever get a lower panel? |
Posted By: outerbanked
Date Posted: May-09-2019 at 1:16am
|
I did. Ended up getting the prototype. It looks nice. I am on travel this week. Have not installed. The letters are printed -not engraved or pressed. Still looking for an original. This is such a low priority winter task for me now that I am focusing on a new engine. Assembling a treasure of engine parts little by little.... I’ll post pics next week |
Posted By: TRBenj
Date Posted: May-09-2019 at 12:52pm
| Cool thanks |
Posted By: erbrown101
Date Posted: May-11-2019 at 12:05am
|
Here is another option. https://newwiremarine.com/ I can send you the file for them to cut without the radio hole. $220 
|
Posted By: TRBenj
Date Posted: May-11-2019 at 12:22am
| Thanks but that’s an ‘88 panel, not an ‘87. |
Posted By: erbrown101
Date Posted: May-12-2019 at 11:22pm
|
couldn't remember when they made the chage. i was inspired by a post here caled - Reproduction 1986 Dash Plates are the '86 and '87 the same? |
Posted By: TRBenj
Date Posted: May-12-2019 at 11:58pm
| No, 87 is standalone (though it was used into ‘88 on the bfn). |
Posted By: outerbanked
Date Posted: May-13-2019 at 8:58pm
    Sorry about the arrangement. I have stitches in one of my hands right now. I had to take these without the assistance of my five year old. |
Posted By: outerbanked
Date Posted: May-13-2019 at 9:01pm
  
|
Posted By: TRBenj
Date Posted: May-13-2019 at 9:21pm
| Thanks for sharing |