Teak Swim Deck & Bimini
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=42125
Printed Date: May-05-2024 at 10:57am
Topic: Teak Swim Deck & Bimini
Posted By: Grillian
Subject: Teak Swim Deck & Bimini
Date Posted: November-07-2017 at 5:57pm
|
These are original parts from a 1998 Super Sport Nautique. They were extras when I purchased the boat, have not been installed, and have been sitting in my garage. They need a good home. Teak Swim Deck ($350 + shipping): Good condition. The board furthest from the hull was damaged and replaced with a piece of teak but never sanded/stained to match. Last owner got that far then replaced the deck with the larger, rounded style. Bimini Top ($150 + shipping): Good condition. No rips or tears and stitching looks good. All tubing seems straight and undamaged. There is a slight indentation where the two arms touch during storage but appears to be only cosmetic. There are some stains but appear to be cleanable. Unsure what all is suppose to be here but it appears to me to be complete. Prefer local pickup to avoid shipping but will ship wherever buyer arranges shipping to. Thanks!         ------------- 1967 Chris Craft Commander 23 1987 Cheetah I/O 1998 Super Sport Nautique |
Replies:
Posted By: kylem428
Date Posted: November-10-2017 at 10:11am
|
Interested in the Bimini. Can you measure the width between the mounting bases, and also forward and rear supports? Also what is the total height? I am wondering if I may be able to mount it to my tower on my 95 super sport. Thank you, Kyle |
Posted By: Grillian
Date Posted: November-13-2017 at 4:55pm
|
Hey Kyle, Sorry for the delay, I was out of town this weekend. The width between mounting bases appears to be approximately 68 inches, but there is enough flex that this could vary by a couple of inches either direction. The height is approximately 36 inches. The distance between supports: 28 & 25 inches. I've attached an image to better describe this in case I misunderstood the needed dims. Let me know if you need more information or pics. Thanks.      ------------- 1967 Chris Craft Commander 23 1987 Cheetah I/O 1998 Super Sport Nautique |
Posted By: kylem428
Date Posted: November-21-2017 at 10:22am
|
I appreciate the measurements. I have to go to the boat now and measure my tower. Stay tuned! Thanks! Kyle |
Posted By: kylem428
Date Posted: November-22-2017 at 12:12pm
|
Unfortunately I don’t think the Bimini will work under my tower. Thanks! Kyle |
Posted By: beardo73
Date Posted: June-22-2018 at 11:42pm
|
Bimini top still for sale? ------------- 1988 Correct Craft Martinique B/R, PCM 454, ~577 HRS. |
Posted By: Grillian
Date Posted: June-25-2018 at 10:52am
|
Still for sale ------------- 1967 Chris Craft Commander 23 1987 Cheetah I/O 1998 Super Sport Nautique |
Posted By: man0seven
Date Posted: September-19-2018 at 2:46pm
|
Is the bimini still available? ------------- 2005 Ski Nautique |
Posted By: Grillian
Date Posted: September-20-2018 at 3:07pm
|
Yep, still for sale. ------------- 1967 Chris Craft Commander 23 1987 Cheetah I/O 1998 Super Sport Nautique |