Ski Nautique 2001 (87) Swim Platform w/brackets
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=42254
Printed Date: April-29-2024 at 4:30pm
Topic: Ski Nautique 2001 (87) Swim Platform w/brackets
Posted By: DCIndustries
Subject: Ski Nautique 2001 (87) Swim Platform w/brackets
Date Posted: December-27-2017 at 3:14pm
I'm selling my swim platform from my 1987 Ski Nautique 2001. Complete with brackets. I believe it will fit all Ski Nautiques from 82-89. Was sanded down with 80 grit and oiled with Starbrite Teak Oil a few months ago. Missing a small sliver of teak on one spot. I'm sure you can see in the pictures. PM me if interested.  
|
Replies:
Posted By: 67nautique312
Date Posted: January-05-2018 at 9:11am
|
How much? let me know Paul, 913-219-3402 ------------- 1963 Classic (handed down to my daughter) 67 Riviera 68 barracuda 1971 Ski Nautique Promo 86 Silver Nautique 1995 Ski Nautique |
Posted By: DCIndustries
Date Posted: January-05-2018 at 1:29pm
| Sent you a pm Paul |
Posted By: 2003mac
Date Posted: January-20-2018 at 12:56pm
|
I may be late to the party, but I just bought an '85 ski nautique. the ski platform is a wreck, so i need a new one. Did you sell yours? if not, how much? If so, curious how much so that i can benchmark... thanks, |
Posted By: 8122pbrainard
Date Posted: January-20-2018 at 1:19pm
Thomas, Welcome to CCfan and getting the 85. Just how bad is the platform? Have you considered reconditioning it? Many have with like new results. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
2003mac wrote:Posted By: 2003mac
Date Posted: January-20-2018 at 7:19pm
| Unfortunately, it is too far gone. It has been sanded down to the screws, and they are poking thru. Not only unsafe, but no telling how many bathing suits would be snagged! I can get a new one from Teak World $500 plus shipping. I was hoping for a more economical option! One way or the other, I will need to bite the bullet. |
Posted By: 8122pbrainard
Date Posted: January-20-2018 at 11:55pm
http://correctcraftfan.com/store/" rel="nofollow - Check out the CCfan store ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: 2003mac
Date Posted: January-21-2018 at 12:29am
| already worth the price of admission. thank you very much! if there are any other tips on where to go for parts, it is much appreciated. i restored a '69 '13 boston whaler for my kids, but the correct craft community is new to me. i am looking forward to the project. |
Posted By: DCIndustries
Date Posted: January-21-2018 at 4:15pm
| Hey, Sorry for the late response. Yes, I still have it. I'm open to offers on it. I'd like to see it go to good use. I seem to remember some being listed on this site around the $300 range. I may be mistaken. |
Posted By: 2003mac
Date Posted: January-21-2018 at 7:05pm
| no problem. i am in no rush as i am just getting going on the boat. just as a reference, a kind ccf poster pointed me to where a new platform runs $380. That is without the brackets, but i have the brackets... i just need the platform. I will check back with you a little later to see if you still have it. as a matter of fact, i may be in the Orlando area early March. Thanks for getting back. |
Posted By: DCIndustries
Date Posted: January-23-2018 at 5:54pm
| Yeah, If you have the brackets and have someone to cut and assemble the teak at that price I'd go for it. Otherwise brackets could run up to $500 (removable) unless you found them used. Let me know when your in Orlando. By March I might just be sick of it taking up space in the garage. haha |
Posted By: G.Williamson
Date Posted: March-07-2018 at 5:00pm
|
Do you still have it? How much do you want for it? Will you ship to Canada? ------------- Geoff Williamson Maple Ridge Canada 778-227-8723 |
Posted By: DCIndustries
Date Posted: March-08-2018 at 2:58pm
| Yes I still have it but I'm not offering shipping. I would be willing to meet up to 50 miles. |
Posted By: 2003mac
Date Posted: March-09-2018 at 9:39am
| well i am coming back to you as promised. i will be in orlando next sunday. will you send me your email so we can chat off line? thanks, |
Posted By: Eric41136
Date Posted: March-21-2018 at 12:48am
| Is platform and brackets still available ? |
Posted By: DCIndustries
Date Posted: March-21-2018 at 7:44am
| Yes they are still available. |
Posted By: Hollywood
Date Posted: March-21-2018 at 11:28am
| I have a set of factory brackets available if DCI runs out. |