Print Page | Close Window

Twin Air Horn Compressor Replacement ?? Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=46982 Printed Date: May-01-2024 at 8:56am Topic: Twin Air Horn Compressor Replacement ?? Posted By: Fiberglassic Subject: Twin Air Horn Compressor Replacement ?? Date Posted: November-06-2018 at 3:36pm I was wondering if someone could give me a recommendation of a good replacement air compressor for the twin horns on my 1965 Barracuda? Also while on this subject can someone explain how the circuit of the horn actuator (in the steering wheel) works to get power to the compressor? Replies: Posted By: JoeinNY Date Posted: November-06-2018 at 5:09pm I haven’t had to go this route yet but I see that harbor freight has plastic air horns that come with compressors for 20-30 bucks I suspect if you could keep them try they would do pretty well as a replacement. I had some success in taking my compressor motor just enough apart to give it a little wd40 and some encouragement and it is blowing dixie again. My steering wheel switch isn’t quite firing the horn yet but it has a grounded housing (ground wire attached to a mounting bolt) and seems intended to ground the coil side of a horn relay when you press the horn ring.    ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1477 - 1983 Ski Nautique 2001 1967 Mustang 302 "Decoy" http://www.youtube.com/watch?v=cO5MkcBXBBs - Holeshot Video

Print Page | Close Window