1985 American Skier Parts Boat
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47644
Printed Date: May-04-2024 at 5:42pm
Topic: 1985 American Skier Parts Boat
Posted By: 9manchu
Subject: 1985 American Skier Parts Boat
Date Posted: June-26-2019 at 1:05am
|
I bought the trailer and it came with a boat. I know wrong brand but maybe someone could use some parts. To me the hull seems very similar to SN 2001. Windshield and frame are in good shape, ski pylon, engine cradle, fuel tank, dash. I thought of keeping the ski platform for a spare but I'd like it to go to someone that needs it. I can't vouch for the functionality or interchangeability of any parts. No engine, transmission, dog house. Most of the brass was removed. I was going to cut up the trailer for a bunk cart in my slip but even that could be refurbished for its intended use. I know what its like to need something for a project... Ideally someone would show up with a trailer and take the whole works. Pay for shipping and what you think the parts (or boat) is worth. I know its not much but the members of this site have helped me a lot over the years, if nothing sells in a couple of weeks, I'll throw it out on Craigslist. The boat is in Menomonie, WI / 45 minutes east of the Twin Cities. Later, Alan        ------------- Politician should not be an occupation |
Replies:
Posted By: 93/70 ccpb
Date Posted: July-02-2019 at 6:35pm
|
check your personal message board ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: jeff513
Date Posted: October-20-2020 at 4:14pm
| do you have photo on that Windshield and frame |
Posted By: jeff513
Date Posted: October-21-2020 at 4:16pm
| windshield you still have it |
Posted By: 8122pbrainard
Date Posted: October-21-2020 at 4:28pm
|
Jeff, Alan hasen't been on site since September-3rd 2019 so I suspect we lost him. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: 8122pbrainard
Date Posted: October-21-2020 at 5:05pm
|
Jeff, What's the winshield you are looking for going on? Knowing may help us. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: tleed
Date Posted: November-12-2020 at 8:40pm
|
I need a prop shaft, rudder, and strut for a 1974 Southwind 18. Any chance your parts fit my boat? My prop shaft is 1" diameter, 40.5" long. Thomas ------------- Thomas 1974 Southwind 18 with 318 cubic inches of reverse rotation roller cam "Moparvation" |
Posted By: jeff513
Date Posted: November-13-2020 at 5:59pm
| 1985 american skier advance |