1972 Ski Nautique Holman Moody raw water pump
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48135
Printed Date: April-19-2024 at 3:41am
Topic: 1972 Ski Nautique Holman Moody raw water pump
Posted By: smiller
Subject: 1972 Ski Nautique Holman Moody raw water pump
Date Posted: October-09-2019 at 5:01pm
|
I am having a major problem locating a 1972 S.N. Holman Moody Windsor 351 raw water pump at a decent price all the pumps I have seen they are wanting $500.00 - $700.00 dollars. I also have checked into some pump rebuild kits & by the time labor is added in it will cost me almost as much as a new one. Plz help ! P.S. My boat hasn't been in the water in 3 yrs I am very discouraged. |
Replies:
Posted By: 8122pbrainard
Date Posted: October-09-2019 at 5:10pm
|
Steve, Have you looked at alternate https://www.skidim.com/products.asp?dept=1094" rel="nofollow - crank driven RWP's . ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Gary S
Date Posted: October-09-2019 at 5:21pm
|
Is this the original Jabsco pump? What parts do you actually need to rebuild it ? These are simple pumps, is the shaft good? The body of the pump good ? Bearings are common, seal is available yet I’m sure, not much left. Cover you’d have to make out of brass sheet stock. Got any pictures of what your working with? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: smiller
Date Posted: October-09-2019 at 5:47pm
|
I haven't looked at a crank driven I don't know the difference unfortunately I am not mechanically inclined. I am not sure the hose connections would work, what brand do you recommend ? I have some pics of my pump but as you can see I am a newby & I haven't figured this site out yet. I am trying to get her wet for the 3rd year and at 66 yrs young its going quick, any ideas would be Greatly appreciated. |
Posted By: smiller
Date Posted: October-09-2019 at 5:58pm
| Plz bare with me I am a newby & I am trying to address the reply's yes its a jabsco pump, The shaft is bad for sure the body is good, bearings locked up (bought new ones), bought a new seal, I have some pics but I need help in sending them any ideas ? Thx for the hope ! |
Posted By: Gary S
Date Posted: October-09-2019 at 6:11pm
|
Never mind I was too slow in asking. Mine needed a new shaft as well but it was many years ago and parts for the most part were still available. For the money your talking for a new pump that wont fit with out alot of work couldn't you just have a machine shop make you a new one? Pete what is evolved cutting splines on a shaft,that looks to be the most difficult part of the job. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: 8122pbrainard
Date Posted: October-09-2019 at 11:50pm
Agree on having a shop make a new shaft. Splines should be easy as long as the shop has a dividing head and the cutter. Now, another idea. How bad is the shaft? If just scored, then Loctite bearing retainer 680 works wonders. If I remember correctly, the stuff can handle .015 gaps. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Gary S wrote:Posted By: Gary S
Date Posted: October-10-2019 at 1:17am
My shaft was torn up pretty bad. Since one was available I grabbed it. The seal area was bad and even the area where the aluminum drive dog was worn along with the drive dog itself. I took the pump and it's drive dog along with a Lovejoy coupler to a machine shop and they fixed me right up. Covers are impossible to find but one could easily made.  ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: smiller
Date Posted: October-10-2019 at 6:19pm
| does anyone know how many parts there are to a 72 S.N. Holman Moody raw water pump? |
Posted By: Gary S
Date Posted: October-10-2019 at 6:30pm
|
I do have a parts schematic from Jabsco . I’ll scan and post later after “work” ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: Gary S
Date Posted: October-11-2019 at 12:26am
http://imgbox.com/38S1mlcR" rel="nofollow"> http://imgbox.com/lOl9dNaR" rel="nofollow">  ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: 8122pbrainard
Date Posted: October-11-2019 at 3:41pm
Steve, Do you think you're missing some parts?  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |