1996 SN CC dash assm
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48351
Printed Date: April-19-2024 at 12:28pm
Topic: 1996 SN CC dash assm
Posted By: The Glove Guy
Subject: 1996 SN CC dash assm
Date Posted: January-23-2020 at 5:33pm
Hello, I'm new to this site, as well as new to forum blogs (I think that's what I'm doing )
Anyway looking for a 1996 Ski Nautique Correct Craft Dash Cover or any one that repairs them in the greater Southern California area. The mounting hole's are deteriorated. I've tried fixing it my self, but cant find anything that will adhere to the existing material It's a 19.5 boat. Any help would be greatly appreciated
-------------
LTGG
|
Replies:
Posted By: winniskier
Date Posted: January-26-2020 at 10:45am
I found plastic material similar to the pod . Bonded a small patch to the inside of the pod with epoxy bought at Home Depot or Lowes. The patch bridges the broken down holes. I did not try to glue the ends of the broken pieces together. I drilled a hole for the screws. It works fine. It looks amateurish, but only I know because its on the inside. I keep an eye on it to spot any failure. Replacement pods come up for sale on this website occasionally. So far, there has been no need to buy a replacement.
-------------
Jim
|
Posted By: The Glove Guy
Date Posted: January-26-2020 at 2:35pm
Hello there winniskier, I was able to use a two part putty I had from another project that seems to be working fine. Applied a day ago and letting it cure. I will sand it to conform to the fiberglass dash on the boat. Agree, it does look a little armature, but again only I / we know lol Thanks for replying
-------------
LTGG
|
|