ISO blown pcm 351 for a project build
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48503
Printed Date: May-04-2024 at 9:19am
Topic: ISO blown pcm 351 for a project build
Posted By: 88tique2001
Subject: ISO blown pcm 351 for a project build
Date Posted: April-05-2020 at 11:11pm
| im located in MA so the closer to new england the better, but also open to further away for the right price. im looking for a blown but rebuildable pcm 351 as a project build. i have an 88 2001 and have always envied the fully restored, painted and clean motors some of you have in yours. mine still runs like a top with just over 800 hours. im always looking for a project to get into with my dad. im a carpenter by trade and he a banker so neither of us are professionals but both enjoy doing a lot repair work ourselves on all the various toys and automobiles and thought this woukd be a fun project for us to pick at over time. so with that being sad, please let me know if anyone is selling or knowns of anyone selling one! thanks in advance! |
Replies:
Posted By: TRBenj
Date Posted: April-06-2020 at 11:19am
| Define “blown”. |
Posted By: scootdogydog
Date Posted: April-06-2020 at 11:33am
|
I have a block. No heads, intake, accessories, and the oil pan isn't on it. Not "blown" so probably a little easier starting point. It came off of a 77 that was running. Located in Massachusetts ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=7183" rel="nofollow - 1999 Python 1980 Ski Tique 1968 Mustang WIP |
Posted By: 8122pbrainard
Date Posted: April-06-2020 at 11:34am
Hopefully not this bad.   ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
TRBenj wrote:Posted By: GottaSki
Date Posted: April-06-2020 at 11:42am
|
<> Nevermind, i rereread it and understand the inquiry now ------------- "There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing." River Rat to Mole |
Posted By: Nautiquehunter
Date Posted: April-06-2020 at 11:45am
|
Sounds like you already have the perfect father son project . Why don't you pull the engine and trans you have clean it, reseal it, paint and detail it . I would wait until winter so you don't loose any boat time. |
Posted By: Southwinds81
Date Posted: April-24-2020 at 10:03pm
| I have a complete 89 351 you can buy all or what you need on ct about 950 hours 203 2032321387 |