1984 #3 Trailer Dimensions
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48504
Printed Date: April-27-2024 at 7:34pm
Topic: 1984 #3 Trailer Dimensions
Posted By: OldSchoolBlue84
Subject: 1984 #3 Trailer Dimensions
Date Posted: April-05-2020 at 11:59pm
|
Hey guys, doing a boat lift bunk replacement from the cradle style to the Shore Station ultra bunks. I don’t have my trailer with me to install the bunks in its correct position and wondering if the image below I found on the site is for a #3 trailer? If not, can someone please measure the rear of their trailer for me? From there I’ll take those dimensions to find what’s needed in the front. I appreciate it and be safe out there. Thanks https://ibb.co/0rWMSd5" rel="nofollow">  https://freeonlinedice.com/" rel="nofollow - dice how to make ------------- Kostas http://www.correctcraftfan.com/diaries/details.asp?ID=6700&sort=&pagenum=1" rel="nofollow - 1984 Ski Nautique 2001 |
Replies:
Posted By: OldSchoolBlue84
Date Posted: April-06-2020 at 1:35am
|
I also found this..... I’m thinking if I’m between 49-1/2” - 52” I should be in the clear. https://ibb.co/72sZgpS" rel="nofollow">  ------------- Kostas http://www.correctcraftfan.com/diaries/details.asp?ID=6700&sort=&pagenum=1" rel="nofollow - 1984 Ski Nautique 2001 |
Posted By: TRBenj
Date Posted: April-06-2020 at 11:40am
| No need to get too fancy on boat lift bunks. They don’t need to taper. Many styles of lifts aren’t adjustable and work just fine. Can check my spacing but would guess they’re around 36-40”. |
Posted By: OldSchoolBlue84
Date Posted: April-06-2020 at 11:43am
Thanks Tim, appreciate it!
------------- Kostas http://www.correctcraftfan.com/diaries/details.asp?ID=6700&sort=&pagenum=1" rel="nofollow - 1984 Ski Nautique 2001 |
TRBenj wrote: