Print Page | Close Window

swim platform Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48800 Printed Date: May-07-2024 at 12:16am Topic: swim platform Posted By: philip Subject: swim platform Date Posted: June-04-2020 at 4:24pm i have a wood platform on my 66 mustang the thing is bolted thru the transome the bolts look good but nuts are corroded. i will likely use this boat mainly as a cruiser so i thought about taking the platform off my questions are as follows. should i replace the nuts and leave it alone if i take it off how do i properly fix the 12 holes thanks philip ------------- philip thompson Replies: Posted By: 8122pbrainard Date Posted: June-04-2020 at 6:28pm Phillip, The quickest way is to put bolts in the holes along with plenty of sealant such as 3M 4200. If the look would bother you then it gets a little complicated with filling the holes with a filled resin and then topping that with gel coat. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < Posted By: moker Date Posted: June-18-2020 at 10:09am If you decide to remove it I be interested in purchasing it. I would try to replace nuts but you need to pull the tank either way to get to them. ------------- Marc

Print Page | Close Window