GT 40 heads
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=7039
Printed Date: May-22-2024 at 9:24pm
Topic: GT 40 heads
Posted By: DESSER.dk
Subject: GT 40 heads
Date Posted: June-11-2007 at 5:49am
I have got a "hole" in my GT 40 head. Water comes out, but only out (not inside the champer).
Casting number is F3ZE AA. If I Goggle this number I find that this head also was on many Ford street cars.
Should I buy one from a car or is it better to buy one from "skidim" ?? (if there is a difference between street/marine edition).
It seems like most of the GT 40 heads later was/are made in Aluminium.
best regards,
jens chr nielsen
copenhagen
denmark
------------- jens c
|
Replies:
Posted By: TRBenj
Date Posted: June-11-2007 at 8:16am
The only advantage to the SkiDIM heads is the brass freeze plugs- auto heads are otherwise the same. Ford installed them on both 302's (Mustang Cobra) and 351's (Lightning pickup). Assuming you have a 351w, you'll need to have the bolt holes drilled out if you get a head off a 302.
Im not sure if the GT40's were later available in aluminum. I know the GT40-X and Y heads were Al, but I dont think the design was related to the GT40. GT40p's are a completely different head as well.
-------------
|
|