Parting out 77 Southwind 20
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=7459
Printed Date: April-27-2024 at 10:28am
Topic: Parting out 77 Southwind 20
Posted By: advsouthwind
Subject: Parting out 77 Southwind 20
Date Posted: July-11-2007 at 3:23am
|
My project is not going to work out so I have a lot of parts available, most in real good shape. Email or call with request. Andy 612 685 3692 cell mpls. MN. ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Replies:
Posted By: 79nautique
Date Posted: July-11-2007 at 4:50am
|
could you list what you have for sale? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: bmiller
Date Posted: July-11-2007 at 3:57pm
| I'll take some teak step plates if you have them,just to have extras.If yours are 3" wide by 12" long I'd like to buy some from you. |
Posted By: advsouthwind
Date Posted: July-12-2007 at 2:00am
|
You name the part its available,from the bow lights to the stern ladder. Most everything is in good shape except for the floor and stringers. ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: 79nautique
Date Posted: July-12-2007 at 2:59am
|
what shape is the morse control in? have any pictures of it? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: advsouthwind
Date Posted: July-12-2007 at 3:16am
|
I can take a picture in the am and email it to you. It works real smooth, and is in good shape. andy ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: 79nautique
Date Posted: July-12-2007 at 5:44am
|
how much do you want for it? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: advsouthwind
Date Posted: July-12-2007 at 11:56am
|
$65.00 for the shifter and $20.00 each for the step plates. ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: advsouthwind
Date Posted: July-12-2007 at 6:21pm
|
------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: advsouthwind
Date Posted: July-12-2007 at 7:01pm
   ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: advsouthwind
Date Posted: July-12-2007 at 7:38pm
I am going to try to post a few more pictures,      ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: nautique frk
Date Posted: July-12-2007 at 10:04pm
|
I am interested in the blue vent scoops on the front and back
How much for those ? Thanks, Mike |
Posted By: nautique frk
Date Posted: July-12-2007 at 10:04pm
|
Why are you parting it out it looks nice ?
|
Posted By: Nautique Mike
Date Posted: July-13-2007 at 1:51am
|
Hey Southwind-
I have interest in the stearing wheel/cap gauges and motor box hinges. Can you send me shots and prices? Best- NM ------------- Nautique Mike |
Posted By: advsouthwind
Date Posted: July-13-2007 at 2:25am
|
Vents and steering wheel are sold as well as 2 step plates. The floor and stringers are gone and needs a new carb. To much $ vs value of a southwind. Im going to look for a 2001 or an open bow nat.I will get pictures of the hinges and post. Thanks for looking Andy ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: advsouthwind
Date Posted: July-13-2007 at 2:27am
|
I replaced the amp meter with a volt guage and the oil pres. guage also but I think I saved the old ones, I will look and photo those also. ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: advsouthwind
Date Posted: July-13-2007 at 12:35pm
here are more pictures   ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: advsouthwind
Date Posted: July-13-2007 at 12:35pm
 ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: hawk172
Date Posted: July-14-2007 at 12:15am
|
Hi. I need the engine box complete with hardware if possible if it is available. Please email me price and availability and shipping options. I think we can ship it UPS if you're willing to box it up. Thanks.
Wayne wildbluyonder@comcast.net ------------- hawk |
Posted By: 84zz4ss
Date Posted: July-21-2007 at 2:39am
|
So do you still have the shifter? I am interested. E-mail jsbclb@cox.net ------------- Thanks Scott |
Posted By: searider
Date Posted: August-23-2007 at 12:23am
Posted By: barr68
Date Posted: August-23-2007 at 9:05am
| I would like to buy the aluminum steering wheel bezel that attaches to the dash(as shown in the picture of your dash). Is it still available and if so,how much? Thanks , Jim B. 571-238-0512 |
Posted By: 93/70 ccpb
Date Posted: August-24-2007 at 2:29am
|
hello advsouthwind,where are you located?intrested in stern ladder,also might be interested in interior,im working on a 1970 correct craft swinger,hull is the same as southwind and freeport so most of parts will fit,you can e mail me your phone number and any photos you have.thanks dan in ohio.my e mail is ccsnpb@sbcglobal.net ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: Lakeman57
Date Posted: August-24-2007 at 4:11pm
| How much for the horn tom@procsol.net |
Posted By: southwind19??
Date Posted: August-25-2007 at 10:22pm
|
Hi Andy, Just Seeing whats been sold Just found out my engine is shot and floor/stingers are bad. Most of my boat has been striped also so anything would be great!!
Does the moter work? run well besides the carb problem...and what is it?? I have a chysler 360 rusted up real good heres what I would like: Fule Tank rear seet all interior bumpers motor and mabye that dash panel ------------- UUUmmmm HEY guys....whats THIS do?? If you start your sentence with UUmm....you probably don't know what your talking about |
Posted By: advsouthwind
Date Posted: August-26-2007 at 1:33am
|
Southwind 19??
I still have the fuel tank with sending unit,and the rear seat.I dont know how easy they will be to ship. I have all of the interior parts,the dash board is there but I took all the guages out of the dash.The engine and trans are sold. Any questions please call me 612 685 3692 Andy Thanks ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: advsouthwind
Date Posted: August-26-2007 at 1:36am
|
Searider, the trailer is not a correct craft trailer but I still have the shifter $65 and the hardware for the engine cover is available . Thanks Andy ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: advsouthwind
Date Posted: August-26-2007 at 1:41am
|
93/70ccpb I live in Champlin MN. ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: austexsouthwind
Date Posted: August-26-2007 at 2:22pm
| Do you have the CC logo plates from the outside of the hull? If so, what is the condition. Could you post a picture, I am very interested for my 78 Southwind. |
Posted By: advsouthwind
Date Posted: August-26-2007 at 3:22pm
|
Austexsouthwind, The outside of the boat had been redone and the emblems removed and replaced with a vinyl emblem so I am sorry that I can not help you on that. ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: that's correct
Date Posted: September-25-2007 at 1:39am
| I am interested to purchase the following items.The motor cover ,rear seat ,raillings,and the front seats.Please reply with the dollar amaount and what you have left. thank you .. |
Posted By: Geno
Date Posted: September-26-2007 at 3:38pm
| Post a photo of the fuel filler neck and cap please. |
Posted By: advsouthwind
Date Posted: September-28-2007 at 12:59pm
|
I would take 200.00 for the seats,railings,and motor cover but shipping will be a pain unless you want to pay trucking fees. Call me and we can talk about it. Andy 612 685 3692 cell
------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: advsouthwind
Date Posted: September-28-2007 at 1:01pm
|
Geno,
I will try to post filler neck this weekend but its nothing you cant get from west marine. It is a basic filler with about 8 inches of fuel fill hose.I will sell for 5.00 plus shipping. Thanks Andy ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: sam57
Date Posted: December-07-2007 at 8:54pm
|
Andy,
Do you still have the engine? Are you selling parts off of it? Sam57 |
Posted By: advsouthwind
Date Posted: December-14-2007 at 12:31am
|
No the engine and trans is sold. I have a prop shaft and support and the shifter and some wood trim pieces that the southwind had. Any questions please call Andy 612 685 3692 ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: Alabama79
Date Posted: January-08-2008 at 1:11pm
|
I did not see if you had sold the rudder yet? ------------- Love My Nautique |
Posted By: advsouthwind
Date Posted: January-18-2008 at 8:19pm
|
Sorry so slow on the reply, the rudder is gone. Advsouthwind ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: SNobsessed
Date Posted: January-18-2008 at 11:03pm
| By any chance do you have a battery box? do you think it is the same as in a '89 SN? |
Posted By: advsouthwind
Date Posted: January-25-2008 at 12:07am
|
My battery sat in a tray by the mufflers. There really was not a box . I can look and see if I stil have that if that is what you are looking for. ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: SNobsessed
Date Posted: January-25-2008 at 12:43am
|
Thanks for answering my inquiry. It doesn't sound like anything close to what I have. I am going to yank mine out for foam removal & have a feeling there is a future crack involved, so I was just shopping ahead.
How are you going to get rid of the hull? Landfill? Just curious. Chris |
Posted By: advsouthwind
Date Posted: January-25-2008 at 9:09pm
|
Yup, I dragged it off the trailer and sat her down in the garbage, it was a shame but it had to be done, it weighed almost 3000 lbs without the engine and trans so it was quite water logged. I am hoping to buy a little newer one that is not so much of a project this spring. ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |