GT-40 Heads
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=9081
Printed Date: May-13-2024 at 5:29pm
Topic: GT-40 Heads
Posted By: bchesley
Subject: GT-40 Heads
Date Posted: November-29-2007 at 2:59am
|
I have a set of PCM GT-40 heads that i bought from JRVic on planet nautique about three months ago. He had a full valve job done on them and put I think about 200 hours on them. I was going to put them on my 2001 over the winter but I sold the boat and upgraded to a Super Sport. It already has a GT motor so I do not need them. This is a nice power upgrade and a easy bolt on. Great winter project....
I would like to get $500 OBO. Brad ------------- 2001 SAN "Python Powered" |
Replies:
Posted By: mjess
Date Posted: December-03-2007 at 8:24pm
|
Brad
Did you sell the GT-40 Heads? ------------- ski naut |
Posted By: bchesley
Date Posted: December-04-2007 at 2:00am
|
Still available. ------------- 2001 SAN "Python Powered" |
Posted By: Bigcity
Date Posted: December-04-2007 at 4:31pm
|
Brad, I left you a message last week. I am interested in the heads. Could you provide a photo.
If everything looks good I would go $400. Thanks, Bigcity |
Posted By: bchesley
Date Posted: December-05-2007 at 2:07am
|
I will get some pictures posted by tomorrow evening. I left my camera at work.
Brad ------------- 2001 SAN "Python Powered" |
Posted By: Bigcity
Date Posted: December-05-2007 at 4:58pm
|
Brad,my motor is a 1994 351w carbed I believe 260hp with approximately 245 hrs. My understanding is that the heads are a staright forward bolt on upgrade that would work with the stock intake and carb set up and boost hp to 290.
I am looking for a little more jam and top end. Thanks for the help. |
Posted By: TRBenj
Date Posted: December-05-2007 at 5:09pm
Yup, the GT40 heads will do just that. Also consider adding an Edelbrock Performer intake manifold (new for $170, used for ~$100) at the same time. Another easy 10hp since you have it apart and putting on new gaskets anyways. ------------- |
Bigcity wrote:Posted By: bchesley
Date Posted: December-06-2007 at 1:31pm
|
well crap I knew I forgot to do something. I got busy last night with the kids and totally forgot. I promise I will do it tonight. I called my wife to remind me. I knew she would come in hand one day...... ------------- 2001 SAN "Python Powered" |
Posted By: bchesley
Date Posted: December-07-2007 at 1:47am
Here are some pictures. You should be able to make out the GT in the casting.
 ------------- 2001 SAN "Python Powered" |
Posted By: 79nautique
Date Posted: December-07-2007 at 2:25pm
|
well the most import part is what you didn't show and that is the three bars on the end, yours look to only have two. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: TRBenj
Date Posted: December-07-2007 at 2:29pm
I see 3. The GT is also indicative of the GT40 heads. Coming from JR_VIC, these heads are legit. ------------- |
Posted By: bchesley
Date Posted: December-07-2007 at 4:50pm
|
they have three. I thought the GT stamp was more important...... ------------- 2001 SAN "Python Powered" |
Posted By: Bigcity
Date Posted: December-07-2007 at 5:13pm
|
Brad, thanks for getting the photo's together.
After all that and having done a little more research I am going to go with the GT40P's from Tristatecylinder for $598 a pair. I am going to also take your advice and get the Edelbrock performer intake #2181. Looking forward to feeling the improvement. Thanks again, Bigcity |
Posted By: bchesley
Date Posted: December-09-2007 at 1:41am
|
I have heard that the GT40P is a good head, but I was going to accecpt your offer at $400. If you want to save 198 let me know. By the way that would pay for a edelbrock intake.
Brad ------------- 2001 SAN "Python Powered" |
Posted By: Towman
Date Posted: December-09-2007 at 5:10am
|
Brad If Bigcity is not interested I am a buyer.
E mail me @ jimmmya@verizon.net what would the best payment method be and shipping $$$ to 02816 |
Posted By: bchesley
Date Posted: December-09-2007 at 8:15pm
|
Let me get a shipping quote and I will email you. Probably gonna be monday afternoon.
Brad ------------- 2001 SAN "Python Powered" |
Posted By: Towman
Date Posted: December-11-2007 at 2:46am
| Thanks Brad payment is on the way |
Posted By: bchesley
Date Posted: December-11-2007 at 4:06pm
|
Heads have been sold. Thanks... ------------- 2001 SAN "Python Powered" |