For Sale | Details
This boat is listed for sale by owner. Additional information has been provided by the seller below. Please contact the owner with any questions. You may use the form below to send the owner an email
Updated:
5/2/2021 (1303 days ago)
Originally Posted: 5/2/2021
Total Views: 2,751
Owner: Craig Lawrence
Forum Nickname: Rockpile
Location: Griswold, CT
Phone:
Model: 1966 Mustang
Length: 15
Engine: 302
HP: 0
Hours: 1
Hull ID:
Price: $1,600
Modify this For Sale Listing
Forum Nickname: Rockpile
Location: Griswold, CT
Phone:
Model: 1966 Mustang
Length: 15
Engine: 302
HP: 0
Hours: 1
Hull ID:
Price: $1,600
Modify this For Sale Listing
Min
$300
$300
Max
$22,500
$22,500
|
Avg
$5,209
Avg
$5,209
|
Asking
$1,600
Asking
$1,600
New crate 302 installed in 1999. Has 30 seconds on it. Oil pump shaft fell out after priming the engine and never got around to pulling the engine to the pan to put oil pump shaft back in.
Been sitting for 22 years at the farm. Hull is solid and original trailer with extendable tongue Is in good shape. Tires look good, would probably look at the bearings if you're traveling far.
Fiberglass motor cover is solid. Gel coat has cracks and the interior plywood is bad but stringers and flotation foam look good. Previous owner hit a rock and replaced the drive shaft, screw and rudder before I bought it. Boat originally had a 289 in it and did 42 mph with one or 4 people on board. Velvet drive transmission shifted smooth and did not vibrate.
New parts I bought in 1999
Crate engine $1700
New Edelbrock marine carb $400
Edelbrock performer RPM manifold $250
Electronic ignition $240
Flywheel, starter, bell housing $450
Have registration for the boat, but no paperwork for the trailer. Have more pictures in Facebook market place in search correct craft mustang in the Norwich CT area. Can send more pictures.
Would like to sell as a package and not part out.
Been sitting for 22 years at the farm. Hull is solid and original trailer with extendable tongue Is in good shape. Tires look good, would probably look at the bearings if you're traveling far.
Fiberglass motor cover is solid. Gel coat has cracks and the interior plywood is bad but stringers and flotation foam look good. Previous owner hit a rock and replaced the drive shaft, screw and rudder before I bought it. Boat originally had a 289 in it and did 42 mph with one or 4 people on board. Velvet drive transmission shifted smooth and did not vibrate.
New parts I bought in 1999
Crate engine $1700
New Edelbrock marine carb $400
Edelbrock performer RPM manifold $250
Electronic ignition $240
Flywheel, starter, bell housing $450
Have registration for the boat, but no paperwork for the trailer. Have more pictures in Facebook market place in search correct craft mustang in the Norwich CT area. Can send more pictures.
Would like to sell as a package and not part out.