Print Page | Close Window

Right rotation 4 blade for 1:1

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51936
Printed Date: April-29-2025 at 12:04am


Topic: Right rotation 4 blade for 1:1
Posted By: Fl Inboards
Subject: Right rotation 4 blade for 1:1
Date Posted: April-28-2025 at 5:29pm
for my own knowledge base. any one have any recommendations for a RR 4 blade propeller for a 1987 2001/351, 1:1. had a customer today looking for a prop recommendation over the three blade acme he is currently running. i suggest he reach out to this site and mentioned  Tim. customer was interested in taming the wake to some degree for slalom skiing.. plenty of 13 inch left 4 blades to choose from i had nothing for right.. 
Thanks. 


-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.




1993 Shamrock "fat" 20. 2008 Nautique 196 5.0


Replies:
Posted By: TRBenj
Date Posted: April-28-2025 at 5:46pm
Acme 208 and 480 are both pancakes (I think), the reduced rake should help settle the nose some. Can’t remember if OJ offers an XMP 4-blade in 1:1 RH sizing but those do a good job at slalom too.

All at the expense of top speed, of course- not my personal cup of tea!

Posted By: Fl Inboards
Date Posted: April-28-2025 at 9:04pm
Thanks Tim, if anyone had a idea for this application it would be you. it has been over 40 years since our 1st and only 2001 hull, then we went to mastercrafts. in those days we really did not have a choice of propeller. the only thing we did was unhook the secondary's to keep them from crashing in at 36 mph.. 
thanks again i will relay to this customer. 


-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.




1993 Shamrock "fat" 20. 2008 Nautique 196 5.0


Print Page | Close Window