Boats For Sale:
64 american skier q’s |
Post Reply 
|
| Author | |
Tim D 
Grand Poobah 
Joined: August-23-2004 Location: United States Status: Offline Points: 2641 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: 64 american skier q’sPosted: February-17-2005 at 2:24pm |
|
I don't know, but my boat had a regular carb. on it,I still have it, I think it's a '65 model Ford Motorcraft, rebuilt so many times (use Holley now)and the fuel pump was not marine either, it had a glass sediment bowl on the bottom. When the diaphram burst, it shot gas out the weep hole on top. I'm glad this happened on the trailer before backing it off. I cranked it smelled gas, turned it off, raised the box and cranked it again and it shot gas about 10 feet in the air. I was told both were original. I don't know when they started marine items like this.
|
|
|
Tim D
|
|
 |
|
|
Rick
Senior Member 
Joined: March-03-2004 Location: United States Status: Offline Points: 338 |
Post Options
Thanks(0)
Quote Reply
Posted: February-17-2005 at 4:13am |
|
The fuel pump and Carb Should be marine. The carb looks the same from the outside but an auto carb is set up to dump gas on the ground if the floats stick. The marine carb has no slot in the butterfly shaft and has a u shaped tube to direct the gas from a stuck float into the engine. I know several people who have used Auto carbs in boats for years. If you do you must be very careful to lift the engine cover and check for fumes before you start it.
|
|
|
|
|
Tim D
Grand Poobah
Joined: August-23-2004 Location: United States Status: Offline Points: 2641 |
Post Options
Thanks(0)
Quote Reply
Posted: February-16-2005 at 3:14pm |
|
I've been told that Correct Craft bought left overs and surplus engines in the early days to save money and marinized them, and used them till they ran out. My 1966 Mustang originally had a '64 block and '65 heads.
|
|
|
Tim D
|
|
|
|
|
havis21
Newbie 
Joined: February-15-2005 Status: Offline Points: 1 |
Post Options
Thanks(0)
Quote Reply
Posted: February-15-2005 at 4:28am |
|
Just got a 64 and had a few q's
The guy said it had a 300 ci ford inline 6, I checked some auto parts stores, 300 avail in 65??? The carb and fule pump look exactly like automotive versions..are they the same?? The motor seems to be shimmed above the stock mounts, and they added 3" around the bottom of the cover....the shaft alignment seems fine...it also does not seem to have a exhaust fan in the eng comp...which I will add...any other tips would be helpful... thx in advance |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options