Stiff Steering on ’90 Ski Nautique

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   The radius of the bend in the steering cable is critical to stiffness in the steering. Any thing less than 12"-14" radius is asking for stiffness & premature wear. If you have a rotary rack rear you can position the cable on the other side no problem. If you have a flat rack that may take some more work. I have worked on boats for a long time and have found boat bulders do not always follow the cable manufactures recommendations.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
nates78ski Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum Member Joined: January-24-2005 Location: United States Status: Offline Points: 1041	Post Options Post Reply Quote nates78ski Report Post Thanks(0) Quote Reply Topic: Stiff Steering on ’90 Ski Nautique Posted: April-28-2005 at 2:40pm
	The radius of the bend in the steering cable is critical to stiffness in the steering. Any thing less than 12"-14" radius is asking for stiffness & premature wear. If you have a rotary rack rear you can position the cable on the other side no problem. If you have a flat rack that may take some more work. I have worked on boats for a long time and have found boat bulders do not always follow the cable manufactures recommendations.
	Nathan My '78 Ski Nautique <a href="http://photobucket.com/Nates78ski" rel="nofoll

Rufus Sanders Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: December-22-2004 Location: United States Status: Offline Points: 4	Post Options Post Reply Quote Rufus Sanders Report Post Thanks(0) Quote Reply Posted: April-28-2005 at 1:27pm
	Hey All, I just picked up a '90 Ski Nautique (from another CCfan member) and I find the steering to be a little too stiff for control with one hand. I've replaced the steering cable on my previous boat a couple of times, but on that boat ('85 American Skier Advance) the cable had larger bend radius in it and actually entered the helm from the passenger side . It steered extremely easily and you could spin the steering wheel. The cable on the CC enters the helm from the drivers side and takes a quick tight 90 degree bend before it heads down under the floor. My questions are: 1) Does anyone have a '90 SN with super easy steering, and if so did a cable change result in the easy steering? 2) Could the tighter bend radius cause the stiffer steering, and if so has anyone solved this problem with a cable re-route or length change? Thanks, R.C. Sanders

Stiff Steering on ’90 Ski Nautique

About CCF

Donate

Partners

Contact