1982 doghouse project |
Post Reply |
Author | |
DAY_TRIP
Newbie Joined: August-24-2009 Location: Juno Beach Fl Status: Offline Points: 38 |
Post Options
Thanks(0)
Posted: May-10-2010 at 9:36pm |
Thanks PAPA. I do have some pics in the thread I started named 89 ski nautique rebuild.
|
|
PAPA
Senior Member Joined: October-06-2009 Location: Fremont, In Status: Offline Points: 202 |
Post Options
Thanks(0)
|
Absolutely agree. Make sure you post pictures of that beauty when you are done. |
|
DAY_TRIP
Newbie Joined: August-24-2009 Location: Juno Beach Fl Status: Offline Points: 38 |
Post Options
Thanks(0)
|
The site for the paint is ==>http://www.alexseal.com. It is a competator to Awlgrip. The benifit over awlgrip is that it can be buffered (if you need or want to). I always paint and never gelcoat just because of gloss retention and ease of install. Much easier to clean too. The paint is a two part system and I sprayed mine using a $35 gravity feed gun. Real key is timing the coats and how heavy each one goes on. If you get shy you don't get as deep of a finish. If you get agreesive or impatient you get a mess that needs to be sanded out and started again the next day. I am no pro so that in of its self a testiment to the ease of use. Happy to answer any specifics.
|
|
connorssons
Platinum Member Joined: January-17-2009 Location: Michigan Status: Offline Points: 1414 |
Post Options
Thanks(0)
|
Day Trip!can you give me more info on that paint? thanks jeff.
|
|
DAY_TRIP
Newbie Joined: August-24-2009 Location: Juno Beach Fl Status: Offline Points: 38 |
Post Options
Thanks(0)
|
Connorssons, Mine is painted. Alexseal which is a buffable urethane. Thanks for the comment!
82, I feel your pain! Much easier to maintain in the long run. |
|
82wake2001
Senior Member Joined: February-14-2008 Location: United States Status: Offline Points: 240 |
Post Options
Thanks(0)
|
A little filling and sanding...ya same as yours....daytrip
|
|
Joe
1982 ski nautique 2001 "Lady of the Wake" |
|
connorssons
Platinum Member Joined: January-17-2009 Location: Michigan Status: Offline Points: 1414 |
Post Options
Thanks(0)
|
Day Trip! is your boat gell coat or paint? looks great, love the blue stripe.
|
|
DAY_TRIP
Newbie Joined: August-24-2009 Location: Juno Beach Fl Status: Offline Points: 38 |
Post Options
Thanks(0)
|
Very cool. Looks like you didn't have much fairing to do at all? The box(s)on mine were both molded from the inside face so tha outside was unfinished glass. Is that what you had?
Good Work |
|
82wake2001
Senior Member Joined: February-14-2008 Location: United States Status: Offline Points: 240 |
Post Options
Thanks(0)
|
It begins...the brown section is getting carpeted...first layer of primer had a little over spray and need to fill in some spots I missed...more pictures to come this weekend...
|
|
Joe
1982 ski nautique 2001 "Lady of the Wake" |
|
DAY_TRIP
Newbie Joined: August-24-2009 Location: Juno Beach Fl Status: Offline Points: 38 |
Post Options
Thanks(0)
|
Thanks nautiquehunter. Kept it simple for sure. Almost ready to go.
|
|
Nautiquehunter
Platinum Member Joined: December-31-2008 Location: Lake Lanier GA Status: Offline Points: 1010 |
Post Options
Thanks(0)
|
Day Trip
That is one clean boat absolutely beautiful . Congrats |
|
DAY_TRIP
Newbie Joined: August-24-2009 Location: Juno Beach Fl Status: Offline Points: 38 |
Post Options
Thanks(0)
|
I have actually done this on my Barefooter and the Ski Nautique. Not a big deal other than tons of fill and fairing. I did a rough sand with 60-80 to knock down the rough stuff and get old foam off. Thne did a ply of 6 oz cloth to "dress" the surface. Then fill two or three times with micro ballons and epoxy. Tons of fun!
|
|
82wake2001
Senior Member Joined: February-14-2008 Location: United States Status: Offline Points: 240 |
Post Options
Thanks(0)
|
well I have finally decided to redo my horrible looking doghouse....with that said i am painting the top portion, and carpeting the bottom part....
has anyone attempted this??? |
|
Joe
1982 ski nautique 2001 "Lady of the Wake" |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |