Boats For Sale:
Cleaning Carb |
Post Reply 
|
| Author | |
Tim D 
Grand Poobah 
Joined: August-23-2004 Location: United States Status: Offline Points: 2641 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Cleaning CarbPosted: August-25-2005 at 3:18pm |
|
That grime is probably from the belts.
|
|
|
Tim D
|
|
 |
|
|
skyhawkflyer
Senior Member 
Joined: February-08-2005 Location: Zimbabwe Status: Offline Points: 275 |
Post Options
Thanks(0)
Quote Reply
Posted: August-24-2005 at 12:43pm |
|
Use spray carb cleaner.
I use a portable gps to check my speed. Works great! |
|
|
|
|
stang72
Platinum Member 
Joined: July-31-2004 Location: United States Status: Offline Points: 1608 |
Post Options
Thanks(0)
Quote Reply
Posted: August-24-2005 at 12:27pm |
|
Lake...I always use carb cleaner. I take the carb off the boat and clean it...That way the gunk does not go anywhere but in a pan!
Speedo's...over time do get off a bit and need readusting.A slight clogging at the pickup or pitot may cause readings to be off but still read.Check to see that nothing is impeeding water flow. You can run along side someone(provided thier speedo is reading right) and see if you are close. |
|
|
|
|
79nautique
Grand Poobah
Joined: January-27-2004 Location: United States Status: Offline Points: 7872 |
Post Options
Thanks(0)
Quote Reply
Posted: August-24-2005 at 12:15pm |
|
Carb cleaner, don't use engine cleaner on the carb. Also the speedo's are adjustable and the tach and speedo's are most likely a little off but with a stock motor that is all the speed you'll see. |
|
|
|
|
The Lake
Platinum Member
Joined: May-13-2005 Location: Lk Winnebago MO Status: Offline Points: 1157 |
Post Options
Thanks(0)
Quote Reply
Posted: August-24-2005 at 12:00pm |
|
I have a Carter AFB carb on a 318. The engine is running good, starting good. However, I took the arrestor off last night just to have a look and found the carb was a little grimey. Sorry for the ignorance of my questions, but I want to clean it up and am not sure the best course to take, spray on carb cleaner? Engine off?
One more thing, I have to push 4500 rpm to get to 40 mph, assuming tach and speedo are correct. I have a Michigan prop, which I can barely read on it "R13." Shouldn't the speed be a little better at those rpms? |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options