Parting 66 Barracuda SS

I would be interested in the exhaust manifolds if they are available. Let me know.

I will take the emblems, PM sent

Jake,
Do you have the Correct Craft side emblem(s)? I need one, but would buy both if you have them.
Thanks,
Wes

Gary,
I think I still have a bucket of parts left over from this boat. I might possibly have the step pad frames still. The pads themselves, as I recall, are shrunken and deformed. It's been a long while since I've rooted through the bucket of parts from this boat. I'm out of town currently but will be able to let you know on Friday night hopefully. I believe I still have the driveshaft and a few other parts as well if you are in need.

Silver15 wrote: You'll have to clarify what you mean by "dia and pitch".

Jake,
The "dia" of a prop is the outside diameter of the prop. The pitch is basically the angle of the blades. If you didn't factor in slip, the pitch is the distance the prop would move forward in one revolution. You can google and find out more.

Still have the prop? Dia and pitch? Thanks, John .

You still have a CC side hull emblem? I need one in any condition as log as it has a good "t" in "correct" for a repair and re-chrome. Steve

Just a heads up for anyone out there.. I still have the original emblems, the shaft, and stuffing box both for rudder and driveshaft.

Did you ever take the boat off the for sale section?

Just giving you static.

Tony

did you sell the Airguide speedo's ??

thanks Paul,

Dan, it has a stern light. I'm not certain weather or not it is original. I'll PM you a picture of it if I can find one. I do not have a flag staff. I'm not certain if they even came with them in these years?
Jake.

Never got a chance to remove the engine or tranny, but here are some pictures in case someone is interested. 318 Chrysler runs great, but like I said, apparently has some sort of head gasket issue. Tranny is in great re manufactured condition and operates great. Willing to sell engine as complete marine engine or pick off the parts e.i. water pump, manifold, etc however I would prefer the former. I have a picture of the steering wheel by request. Like I said, I accidentally ripped off the center piece. ALSO, for Todd, here are pictures of the lifting eyes. If you all have any questions about anything, just ask.

Hussler, The rudder is no longer available. I do still have the prop, shaft, engine and tranny though as well as most of the smaller hardware you see pictured.
Todd, I will try to get them off the boat. Whoever installed them last did not use stainless nuts.

Jake,

Got your PM and am good with the offer on the two "bow" eyes if you are.

Put up a close up picture of the lifting rings, and send me a PM on the price. I know I could use those and will arrange for re-chrome. You may need a bigger box!!

Thanks, Todd

More pictures of the shifter for Tonali. Could not be sent in a PM for some reason.