Boats For Sale:
Strut Bushing |
Post Reply 
|
| Author | |
64 Skier 
Senior Member 
Joined: February-08-2004 Location: United States Status: Offline Points: 415 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Strut BushingPosted: January-25-2005 at 5:24am |
|
Nauti Girl,
Excellent response. Amazing how a little time spent reading can set us all straight. I'm replacing my prop and will make sure I check the bushing tolerance while I'm at it. Thanks for the research. Good Luck! |
|
 |
|
|
nauti girl
Groupie 
Joined: January-20-2004 Location: United States Status: Offline Points: 61 |
Post Options
Thanks(0)
Quote Reply
Posted: January-25-2005 at 12:39am |
|
I got some BAD information on this thread. So, I thought I would write back in to let everyone else know the correct answer to my question. New A R E strut bushings are manufactured with inside diameter 1.008" - 4 thousandths clearance all the way around the shaft for a layer of water. They are NOT "snug" on the shaft. There IS play. You can easily feel it (if you have perfect shaft alignment). Furthermore, a shaft bushing is NOT considered "worn out" until there is 1/16" (~62 thousandths) clearance. THANKS ALOT "tryan"! I pulled my shaft and bushing and purchased a new one only to find out my old one had only worn 2 thousandths (total I.D. 1.010). What a HUGE waste of time and money!
|
|
|
Nauti Girl
--I think my husband uses his own login now! |
|
|
|
|
trauski
Newbie 
Joined: July-13-2004 Location: United States Status: Offline Points: 7 |
Post Options
Thanks(0)
Quote Reply
Posted: July-13-2004 at 8:21pm |
|
$350 shaft is getting off easy. try 1400 bucks. after bushing fails , shaft breaks, bends strut and prop redesigns the bottom of your boat. you could rebuild prop but it might fall off and sink.
i caught mine just before she broke. all the sudden i developed a strong vibration on take off. dove under to check for weeds or debris. saw nothing , so i pulled boat out. on further investigating, the shaft had a crack all the way around it ,near just past the strut. one more take-of would have snapped it.strut had become bent and caused bushing to wear out. happend 2 days before i was to take boat on houseboat trip,go figure. |
|
|
1993 ski nautique,pro-boss,14/16 OJ 4-blade,perfect-pass,dual mirrors on top
|
|
|
|
|
kenny g
Senior Member
Joined: December-13-2003 Location: United States Status: Offline Points: 318 |
Post Options
Thanks(0)
Quote Reply
Posted: April-29-2004 at 1:13pm |
|
NONE.
nauti girl,go to boat maintenance page 4 and look at shaft rotation. this should help you. tryan said they need replacement at 300 hours. a $40 bushing vs a $350 shaft,why guess? |
|
|
kenny g
|
|
|
|
|
nauti girl
Groupie
Joined: January-20-2004 Location: United States Status: Offline Points: 61 |
Post Options
Thanks(0)
Quote Reply
Posted: April-28-2004 at 11:38pm |
|
DUUUHHHH... I've gotten that far. Any clue how much wiggle?
|
|
|
Nauti Girl
--I think my husband uses his own login now! |
|
|
|
|
boatnut
Newbie
Joined: March-09-2004 Location: United States Status: Offline Points: 24 |
Post Options
Thanks(0)
Quote Reply
Posted: April-28-2004 at 9:14pm |
|
grab it and try to wiggle it. You'll know.
|
|
|
|
|
nauti girl
Groupie
Joined: January-20-2004 Location: United States Status: Offline Points: 61 |
Post Options
Thanks(0)
Quote Reply
Posted: April-28-2004 at 8:32pm |
|
How will I know when my strut bushing is worn out? Is there a good way to measure clearance? What clearance is too much?
|
|
|
Nauti Girl
--I think my husband uses his own login now! |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options