What's the best pitot replacement? |
Post Reply |
Author | ||
KRoundy
Platinum Member Joined: August-23-2010 Location: Lake Stevens Status: Offline Points: 1702 |
Post Options
Thanks(0)
Posted: May-16-2015 at 1:22pm |
|
Update - I got my replacements from SkiDim and installed them. Put it up on the blog. Here is a link to my blog where I show the job from start to end. As far as doing boat stuff, this was an extremely easy job to do.
|
||
Previous: 1993 Electric Blue/Charcoal Ski Nautique
Current: 2016 Ski Nautique 200 Open Bow |
||
ryanibanez88
Senior Member Joined: July-22-2011 Location: Midland TX Status: Offline Points: 219 |
Post Options
Thanks(0)
|
|
i think i will be ordering me one
|
||
Ryan
1997 Ski Nautique Midland Texas |
||
KRoundy
Platinum Member Joined: August-23-2010 Location: Lake Stevens Status: Offline Points: 1702 |
Post Options
Thanks(0)
|
|
I got the replacements linked above. They are a nice high-quality unit, better than the originals, Easy to modify to fit in the OEM Airguide holes in your hull. I've taken a few photos of the job. When I get some time I'll put up a quick how-to for everybody, but the SkiDim site does a good job of showing what you need to do.
|
||
Previous: 1993 Electric Blue/Charcoal Ski Nautique
Current: 2016 Ski Nautique 200 Open Bow |
||
Orlando76
Grand Poobah Joined: May-21-2013 Location: Mount Dora, FL Status: Offline Points: 3108 |
Post Options
Thanks(0)
|
|
Wait a lil longer, use a phone for speed for a few weeks. Pitots seem to pop up regularly for not much money. Just search eBay under Correct Craft or Airguide. Two months ago I needed 2. Now I have a surplus and been outbid on a few pairs since.
|
||
dwouncmd
Gold Member Joined: July-10-2009 Location: NC Status: Offline Points: 919 |
Post Options
Thanks(0)
|
|
I used the pitot linked to above and as Hollywood and Pete suggest, widened/ellipsed the holes of the pitot slightly with a drill. I used the original mountings holes in the fiberglass and seated them with 3M 4200. They went on easily and work well. |
||
89 SN
<a href="http://www.correctcraftfan.com/diaries/details.asp?ID=6567&sort=&pagenum=1" rel="nofollow">7 |
||
8122pbrainard
Grand Poobah Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
Post Options
Thanks(0)
|
|
The holes needed in the new pitot are really just elongations of the existing and not new locations. Change both so they look original!
|
||
DayTony
Gold Member Joined: June-30-2013 Location: Salem MA Status: Offline Points: 832 |
Post Options
Thanks(0)
|
|
this was a question i was hoping would be asked, which brand fits/works best with our holes?
my boat has three of the darn things |
||
1988 Barefoot nautique-454
|
||
Hollywood
Moderator Group Joined: February-04-2004 Location: Twin Lakes, WI Status: Offline Points: 13515 |
Post Options
Thanks(0)
|
|
Its far simpler to drill a new hole in the pitot than your fiberglass... Any pitot will work.
|
||
Alex47
Senior Member Joined: November-11-2010 Location: Tarzana Status: Offline Points: 136 |
Post Options
Thanks(0)
|
|
Unfortunately one of my original style airguide pitots broke and I am now searching for a replacement. I know nos or used original style pitots will randomly show up on ebay, and that is my preferred replacement. But until one shows up...
Has anyone experimented with aftermarket pitot replacements for the original style airguide pitot? I want to avoid drilling new holes in the transom. Any recommendations? I saw this replacement on skidim. |
||
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |