Boats For Sale:
water pump not initiating |
Post Reply 
|
| Author | |
wakespirit 
Groupie 
Joined: July-21-2012 Location: fr Status: Offline Points: 95 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: water pump not initiatingPosted: July-11-2015 at 3:24pm |
|
I finnaly discover a small hole on one water hose at location you tight it. I bougth a new hose and all is working ok now. Water debit from pump is perfect at idel and high speed and motor temp remains around 150F.
Thanks for all your help Regards |
|
 |
|
|
wakespirit
Groupie
Joined: July-21-2012 Location: fr Status: Offline Points: 95 |
Post Options
Thanks(0)
Quote Reply
Posted: July-10-2015 at 8:30pm |
|
Ok will cross check that . Does ansmaml hole n a hose could cause this ?
Is there other things I could check excpet this or it is jist a metter of air ? |
|
|
|
|
8122pbrainard
Grand Poobah 
Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41045 |
Post Options
Thanks(0)
Quote Reply
Posted: July-10-2015 at 7:38pm |
|
Serge,
Sounds like you are sucking air on the suction side of the pump. Check all your hose connections. |
|
|
|
|
wakespirit
Groupie
Joined: July-21-2012 Location: fr Status: Offline Points: 95 |
Post Options
Thanks(0)
Quote Reply
Posted: July-10-2015 at 4:24pm |
|
I finnaly buy a new impeller kit for my water pump.
But then even after ths Ivhave a strange issue. When I star the motor i can see the water rising up in the tube but then after a while the motor temerature rise up. It seem that at idle speed the ampunt of waterwhich troval is not enough. If i put some gaz in neutral more water are coming because motor run faster rpm and then temperature drop down to 160F.. Then back to idle without gaz and temperature eaise up again What could it be ? Bad idle speed? Thanks for help |
|
|
|
|
SNobsessed
Grand Poobah
Joined: October-21-2007 Location: IA Status: Offline Points: 7102 |
Post Options
Thanks(0)
Quote Reply
Posted: July-05-2015 at 7:41pm |
|
Check all hose connections to make sure they are tight. If nothing bad there, then i would inspect the impeller. That is only a 30 minute job, so nothing to lose there.
|
|
|
“Beer is proof that God loves us and wants us to be happy.”
Ben Franklin |
|
|
|
|
wakespirit
Groupie
Joined: July-21-2012 Location: fr Status: Offline Points: 95 |
Post Options
Thanks(0)
Quote Reply
Posted: July-05-2015 at 1:30pm |
|
Yes it is the impeller area may be needed to remove it ?
|
|
|
|
|
SNobsessed
Grand Poobah
Joined: October-21-2007 Location: IA Status: Offline Points: 7102 |
Post Options
Thanks(0)
Quote Reply
Posted: July-05-2015 at 9:36am |
|
Sounds like a bad impeller. It is supposed to be self priming.
|
|
|
“Beer is proof that God loves us and wants us to be happy.”
Ben Franklin |
|
|
|
|
Smithfamily
Platinum Member 
Joined: December-26-2007 Location: Orlando, Fl Status: Offline Points: 1602 |
Post Options
Thanks(1)
Quote Reply
Posted: July-05-2015 at 9:34am |
|
Are you talking about the engine driven water pump? That circulates water through the engine to cool it? Picture?
|
|
|
Js
|
|
|
|
|
wakespirit
Groupie
Joined: July-21-2012 Location: fr Status: Offline Points: 95 |
Post Options
Thanks(0)
Quote Reply
Posted: July-05-2015 at 6:50am |
|
Dear all, I have notice thta no water flow correctly from water pump on my correct craft 2001,
I could see some small amout of waater atvthe water pump input but does not go further. In order to try to initiate it, I remove the tuve from the pump and pump some water directly inside the pump in case it is too dry, but no luck. Is there a better way to initiate the water pump befor I try to desasembling all? Regards Serge |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options