Boats For Sale:
Ignition/linkage problems |
Post Reply 
|
| Author | |
98nautique 
Newbie 
Joined: July-05-2006 Location: Afghanistan Status: Offline Points: 2 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Ignition/linkage problemsPosted: July-07-2006 at 1:57pm |
|
Thanks Joe,
That was very helpful. I will give those things a try and def. take pictures first...good idea! Thanks again. EM |
|
 |
|
|
joed
Senior Member 
Joined: May-04-2006 Location: United States Status: Offline Points: 144 |
Post Options
Thanks(0)
Quote Reply
Posted: July-05-2006 at 7:27pm |
|
Here's a little advice from a newbie for what it's worth.
Ignition switch. First make sure it's the right switch with the same number of connectors/wires as your original. Then I would take your wires off your current switch ONE AT A TIME and connect them to the proper terminal on your new switch. Is it a 3-way (off/start/run) or 4-way (off/start/run/accessory) switch? If the new one is identical to your old one... switching 'em out should be a breeze. On adjusting your tranny cable... I'd do a search, or look in a manual. Is it a Borg Warner Velvet Drive? If so... I believe it's as simple as disconnecting the linkage at the tranny... then finding the "neutral detent" at the lever on the tranny... then adjusting the cable accordingly. Please don't take my advice as gospel cause I'm just learning this stuff. But it might help get you started. My advice... take things slow. One thing at a time. mark, label, or take pictures of everything before you start taking things apart. Hope that helps. Joe |
|
|
|
|
98nautique
Newbie
Joined: July-05-2006 Location: Afghanistan Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: July-05-2006 at 4:31pm |
|
Everyone, this is my first post, so forgive me if it is repetetive. I have a 98 Nautique that is tricky to start. That is the first problem. the ignition switch broke this past weekend while I was trying to start the boat. The key will turn 360 degrees now in the ignition. I have ordered a new ign. switch from SkiDim.com. I am guessing all I need to do is unplug the battery and then take the old switch out and put the new one in. Is that correct?
Second, I beleive my linkage is off. When I put the boat in nuetral it makes a grinding noise. I can find nuetral however by moving the throttle a hair forward out of the traditional nuetral position. Any thoughts on how to fix this? Please help, I can't find a mechanic in my area (Lake Wylie South Carolina). Thanks, EM |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options