Stringers

For the most part I wore a tyvex with basic charcoal filtered mask with good ventilation. The issue was when I started painting the top coat cause since it was xylene based no matter how good my ventilation was and how good my mask was that paint would kick your a%% and we dubbed it (death paint) but 5 years later that paint still looks Brandnew. The coating was Calle Ltd durabak it’s a military deck paint that is crazy strong. Check it out it has amazing durability and Uv protection

I came across this info.

Maybe an alternative for stringers someday?

Maybe wood boats will make a comback!

Nano wood

DasBoot67 wrote: What does everybody use on the under side of floor it has been cepes

Epoxy and glass.

Dreaming wrote: Lots of reading material on the site if you take a bit and search for it.

Lots of reading material on the site if you take a bit and search for it.   The process is pretty involved, so from the sounds of it, you have taken out the fiberglass floor, foam and original stringers, then you have already cut new stringers and CPES'd them?    if so, your next step is to fiberglass (glue then wrap) your stringers in place.   Again, some of the other threads would likely be much more educational for you.