Carpet replacement

I have heard thru several saltwater boaters that bed liner makes a great oil pan rust preventative

Nautiquehunter wrote: These guys will cross the country to get the original screw to hold the horn on .

Steve.......Have you considered using Nautolex instead of Carpet? It was used in the early 70's and still readily available in different colors and from Amazon.

jack_hunter88 wrote: A piece of a advice. As an alternative pray-on truck bed liner. Carpets that get wet trap moisture against the deck, and the polyester resin used on boats is NOT waterproof (the thing keeping the lake outside your hull is the gellcoat or paint, not the hull), and eventually, you have a punky deck.

So why doesn't my boat fill up and sink due to water leaking through the fiberglass mufflers that are below the water line?

Is pray on truck bed liner something that's easy on the knees or something?

Not sure your plan, but I have the last known remaining remnant of the blue/black turf that was originally used.   The manufacturer went out of business years ago and I was able to find a partial roll.. I am pretty sure there is plenty to do one more restoration if you were interested. Private Message me if interested. Or email me at kfinn81@msn.com.

Kevin

We are getting started on our Ski Tique stringer job. I am currently just removing all of the small parts that will getting replated, reupholstered, modified, etc. I was think about the flooring today. Have there been any big advancements in the world of marine carpet that I should be aware or? If there is something that holds less water or is less susceptible to mold, I would be interested in. I found a lot on the site regarding carpet adhesives but noting on carpet specifically, other than SeaDek.