97 Sport Nautique Throttle body gaskets

BobinIL wrote: I ordered the throttle body gasket from my local (2 hours away) Nautique dealer, who ordered them from PCM

   
Can't go wrong that way

Edit   see late additional info below

Click link for more info on making a 70262 work courtesy of Gary S

link

Any updates on what worked for gaskets?............for the next guy with the same question

Fel-Pro does list gaskets for the 351W
You can use FMEcat.com and enter the part number one at a time
Click on the part number after it comes (up in blue print) and it will open a picture of that part.
You can compare to yours and get the one needed.
It looks like the truck F150 Lightning used a similar intake to our GT40 fuel injection.
If these are not the same look up the Ford Mustang 302 gaskets, one will match yours.
351W
Options
60845   Throttle Body Mounting Gasket
71216    Throttle body mount
MS90361 Lower Intake Manifold set upper not included
MS94176 Upper intake manifold set

Lightning 351W
MS95952-1 Lower Set and Upper set Intake Manifold Gasket Set
MS95953    Plenum Gasket Set Upper only

I pulled the air intake and throttle body off of my 97 Sport GT40 yesterday to install the new injectors. One of the square gaskets that go between the throttle body and the multi-port air manifold tore while removing. These are about 5" square with about a 3" circle in the middle. Any idea where I can get one?

I also swapped out the hi flow fuel pump in the fuel cell. When I turned the key on after the fuel pump swap it still doesn't kick the pump on to spin up the fuel pressure. Does the fuel cell need to be full of fuel to activate the HP pump? Or do I have a bad fuse or tripped breaker somewhere? I checked the three red push button breakers on the back of the engine already. Next I will swap out the other fuel pump.